20 Dec, 2011
1 commit
-
Signed-off-by: Laurent Pinchart
Signed-off-by: Florian Tobias Schandinat
19 Aug, 2011
1 commit
-
Instead of hardcoding register values through the driver, define macros
for individual register bits using the register name and the bit name,
and use the macros.Signed-off-by: Laurent Pinchart
23 May, 2011
1 commit
-
Based on the patch by Takanari Hayama
Adds support framework necessary to use Media RAM (MERAM)
caching functionality with the LCDC. The MERAM is accessed
through up to 4 Interconnect Buffers (ICBs).ICB numbers and MERAM address ranges to use are specified in
by filling in the .meram_cfg member of the LCDC platform dataSigned-off-by: Damian Hobson-Garcia
Signed-off-by: Paul Mundt
16 Mar, 2011
1 commit
-
Supports YCbCr420sp, YCbCr422sp, and YCbCr44sp, formats
(bpp = 12, 16, and 24) respectively.When double-buffering both Y planes appear before the C planes (Y-Y-C-C),
as opposed to Y-C-Y-C.Set .nonstd in struct sh_mobile_lcdc_chan_cfg to enable YUV mode, and use
.bpp to distiguish between the 3 modes.
The value of .nonstd is copied to bits 16-31 of LDDFR in the LCDC and
should be set accordingly.
.nonstd must be set to 0 for RGB mode.Due to the encoding of YUV data, the framebuffer will clear to green
instead of black.In YUV 420 mode, panning is only possible in 2 line increments.
Additionally in YUV 420 mode the vertical resolution of the framebuffer
must be an even number.Signed-off-by: Damian Hobson-Garcia
Signed-off-by: Paul Mundt
10 Mar, 2011
1 commit
-
Support for backlight devices controlled through board-specific
routines. Backlights can be defined per-channel and follow fbdev
directives to switch off as the LCD blanks or is turned on/off.Signed-off-by: Alexandre Courbot
Signed-off-by: Paul Mundt
14 Sep, 2010
2 commits
-
The SH-Mobile HDMI driver runs in several contexts: ISR, delayed work-queue,
task context, when called from the sh_mobile_lcdc framebuffer driver. This
creates ample race possibilities. Even though most these races are purely
theoretical, it is better to close them. To trace fb_info validity we install a
notification callback in the HDMI driver, and the only way for it to get to
driver internal data is by using struct sh_mobile_lcdc_chan, therefore it had
to be extracted into a separate common header.Signed-off-by: Guennadi Liakhovetski
Signed-off-by: Paul Mundt -
This is a preparation for HDMI hotplug support. This patch just moves all
platform defined video modes for the sh_mobile_lcdcfb driver to separate
arrays and switches all users to use element 0 of that array, so, this patch
doesn't introduce any functional changes and as such should not cause any
regressions.Signed-off-by: Guennadi Liakhovetski
Signed-off-by: Paul Mundt
04 Aug, 2010
1 commit
-
HDMI support for the sh_mobile_lcdc framebuffer driver will require a 'struct
fb_info *' pointer for its .display_on() callback. While at it fix kfr2r09
framebuffer modular build.Signed-off-by: Guennadi Liakhovetski
Acked-by: Magnus Damm
Signed-off-by: Paul Mundt
31 May, 2010
1 commit
25 May, 2010
1 commit
-
FBIO_WAITFORVSYNC is currently implemented by matroxfb, atyfb, intelfb and
more. All of them keep redefining the same FBIO_WAITFORVSYNC macro over
and over again, so move it to linux/fb.h and clean up those duplicate
defines.Signed-off-by: Grazvydas Ignotas
Cc: Ville Syrjala
Cc: Grant Likely
Cc: Maik Broemme
Cc: Petr Vandrovec
Cc: Benjamin Herrenschmidt
Cc: Krzysztof Helt
Cc: "Hiremath, Vaibhav"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
24 May, 2010
1 commit
-
The LCDC block is allowed to use one of the two output data formats, when used
with MIPI DSI: RGB24 and YUV422. YUV422 is not currently handled by the LCDC
driver, but we have to add a define for it for MIPI.Signed-off-by: Guennadi Liakhovetski
Signed-off-by: Paul Mundt
16 Feb, 2010
1 commit
-
Added FBIO_WAITFORVSYNC ioctl for SH-Mobile devices.
Tested on MS7724 and MigoR boards against 2.6.33-rc7.Signed-off-by: Phil Edworthy
Signed-off-by: Paul Mundt
09 Dec, 2009
1 commit
-
This patch adds a ->start_transfer() callback to the
driver sh_mobile_lcdcfb.c. The callback is used to
program the LCDC panel in the case of one-shot mode.Needed by the LCD controller used on the KFR2R09 board.
Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt
22 Dec, 2008
1 commit
-
This patch adds sh_mobile_lcdcfb deferred io support for SYS panels.
The LCDC hardware block managed by the sh_mobile_lcdcfb driver supports
RGB or SYS panel configurations. SYS panels come with an external display
controller that is resposible for refreshing the actual LCD panel. RGB
panels are controlled directly by the LCDC and they need to be refreshed
by the LCDC hardware.In the case of SYS panels we can save some power by configuring the LCDC
hardware block in one-shot mode. In this one-shot mode panel refresh is
managed by software. This works well together with deferred io since it
allows us to stop clocks for most of the time and only enable clocks when
we actually want to trigger an update. When there is no fbdev activity
the clocks are kept stopped which allows us to deep sleep.The refresh rate in deferred io mode is set using platform data. The same
platform data can also be used to disable deferred io mode.As with other deferred io frame buffers user space code should use fsync()
on the frame buffer device to trigger an update.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt
20 Oct, 2008
2 commits
-
Add platform data flags for detailed lcd display configuration.
Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt -
Remove lddckr from the platform data, these days we calculate the
register value from clock source and clock dividers anyway.Signed-off-by: Magnus Damm
Signed-off-by: Paul Mundt
01 Oct, 2008
1 commit
-
This provides a workaround for users of sh_mobile_lcdcfb that don't
define HAVE_CLK and have otherwise sane clock initialization.At the same time, move the sh_mobile_lcdc.h header to include/video/.
Signed-off-by: Paul Mundt