15 Oct, 2007

2 commits

  • * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits)
    [SCSI] gdth: fix CONFIG_ISA build failure
    [SCSI] esp_scsi: remove __dev{init,exit}
    [SCSI] gdth: !use_sg cleanup and use of scsi accessors
    [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2
    [SCSI] gdth: Setup proper per-command private data
    [SCSI] gdth: Remove gdth_ctr_tab[]
    [SCSI] gdth: switch to modern scsi host registration
    [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes
    [SCSI] gdth: clean up host private data
    [SCSI] gdth: Remove virt hosts
    [SCSI] gdth: Reorder scsi_host_template intitializers
    [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers
    [SCSI] gdth: Remove 2.4.x support, in-kernel changelog
    [SCSI] gdth: split out pci probing
    [SCSI] gdth: split out eisa probing
    [SCSI] gdth: split out isa probing
    gdth: Make one abuse of scsi_cmnd less obvious
    [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation
    [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution
    [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
    ...

    Linus Torvalds
     
  • deal with signedness of the stuff passed to set_bit() et.al.

    Signed-off-by: Al Viro
    Signed-off-by: Linus Torvalds

    Al Viro
     

13 Oct, 2007

1 commit


15 Feb, 2007

1 commit

  • After Al Viro (finally) succeeded in removing the sched.h #include in module.h
    recently, it makes sense again to remove other superfluous sched.h includes.
    There are quite a lot of files which include it but don't actually need
    anything defined in there. Presumably these includes were once needed for
    macros that used to live in sched.h, but moved to other header files in the
    course of cleaning it up.

    To ease the pain, this time I did not fiddle with any header files and only
    removed #includes from .c-files, which tend to cause less trouble.

    Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
    arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
    allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
    configs in arch/arm/configs on arm. I also checked that no new warnings were
    introduced by the patch (actually, some warnings are removed that were emitted
    by unnecessarily included header files).

    Signed-off-by: Tim Schmielau
    Acked-by: Russell King
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Tim Schmielau
     

14 Dec, 2006

1 commit

  • Run this:

    #!/bin/sh
    for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do
    echo "De-casting $f..."
    perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f
    done

    And then go through and reinstate those cases where code is casting pointers
    to non-pointers.

    And then drop a few hunks which conflicted with outstanding work.

    Cc: Russell King , Ian Molton
    Cc: Mikael Starvik
    Cc: Yoshinori Sato
    Cc: Roman Zippel
    Cc: Geert Uytterhoeven
    Cc: Ralf Baechle
    Cc: Paul Mackerras
    Cc: Kyle McMartin
    Cc: Benjamin Herrenschmidt
    Cc: Martin Schwidefsky
    Cc: "David S. Miller"
    Cc: Jeff Dike
    Cc: Greg KH
    Cc: Jens Axboe
    Cc: Paul Fulghum
    Cc: Alan Cox
    Cc: Karsten Keil
    Cc: Mauro Carvalho Chehab
    Cc: Jeff Garzik
    Cc: James Bottomley
    Cc: Ian Kent
    Cc: Steven French
    Cc: David Woodhouse
    Cc: Neil Brown
    Cc: Jaroslav Kysela
    Cc: Takashi Iwai
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Robert P. J. Day
     

26 Oct, 2006

1 commit


05 Oct, 2006

1 commit

  • Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
    of passing regs around manually through all ~1800 interrupt handlers in the
    Linux kernel.

    The regs pointer is used in few places, but it potentially costs both stack
    space and code to pass it around. On the FRV arch, removing the regs parameter
    from all the genirq function results in a 20% speed up of the IRQ exit path
    (ie: from leaving timer_interrupt() to leaving do_IRQ()).

    Where appropriate, an arch may override the generic storage facility and do
    something different with the variable. On FRV, for instance, the address is
    maintained in GR28 at all times inside the kernel as part of general exception
    handling.

    Having looked over the code, it appears that the parameter may be handed down
    through up to twenty or so layers of functions. Consider a USB character
    device attached to a USB hub, attached to a USB controller that posts its
    interrupts through a cascaded auxiliary interrupt controller. A character
    device driver may want to pass regs to the sysrq handler through the input
    layer which adds another few layers of parameter passing.

    I've build this code with allyesconfig for x86_64 and i386. I've runtested the
    main part of the code on FRV and i386, though I can't test most of the drivers.
    I've also done partial conversion for powerpc and MIPS - these at least compile
    with minimal configurations.

    This will affect all archs. Mostly the changes should be relatively easy.
    Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

    struct pt_regs *old_regs = set_irq_regs(regs);

    And put the old one back at the end:

    set_irq_regs(old_regs);

    Don't pass regs through to generic_handle_irq() or __do_IRQ().

    In timer_interrupt(), this sort of change will be necessary:

    - update_process_times(user_mode(regs));
    - profile_tick(CPU_PROFILING, regs);
    + update_process_times(user_mode(get_irq_regs()));
    + profile_tick(CPU_PROFILING);

    I'd like to move update_process_times()'s use of get_irq_regs() into itself,
    except that i386, alone of the archs, uses something other than user_mode().

    Some notes on the interrupt handling in the drivers:

    (*) input_dev() is now gone entirely. The regs pointer is no longer stored in
    the input_dev struct.

    (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
    something different depending on whether it's been supplied with a regs
    pointer or not.

    (*) Various IRQ handler function pointers have been moved to type
    irq_handler_t.

    Signed-Off-By: David Howells
    (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

    David Howells
     

01 Oct, 2006

1 commit

  • After Christophs SCSI change, the only usage left is RQ_ACTIVE
    and RQ_INACTIVE. The block layer sets RQ_INACTIVE right before freeing
    the request, so any check for RQ_INACTIVE in a driver is a bug and
    indicates use-after-free.

    So kill/clean the remaining users, straight forward.

    Signed-off-by: Jens Axboe

    Jens Axboe
     

14 Jul, 2006

1 commit


03 Jul, 2006

1 commit


01 Jul, 2006

1 commit


20 Jun, 2006

1 commit

  • This ugly hack was long overdue to die.

    It was a way to print out Sparc interrupts in a more freindly format,
    since IRQ numbers were arbitrary opaque 32-bit integers which vectored
    into PIL levels. These 32-bit integers were not necessarily in the
    0-->NR_IRQS range, but the PILs they vectored to were.

    The idea now is that we will increase NR_IRQS a little bit and use a
    virtualreal IRQ number mapping scheme similar to PowerPC.

    That makes this IRQ printing hack irrelevant, and furthermore only a
    handful of drivers actually used __irq_itoa() making it even less
    useful.

    Signed-off-by: David S. Miller

    David S. Miller
     

21 Feb, 2006

1 commit


23 Dec, 2005

1 commit


07 Nov, 2005

2 commits


30 Jul, 2005

1 commit

  • drivers/fc4/fc.c: In function `fcp_scsi_dev_reset':
    drivers/fc4/fc.c:933: warning: control reaches end of non-void function

    Cc: James Bottomley
    Signed-off-by: Andrew Morton
    Signed-off-by: James Bottomley

    Andrew Morton
     

03 Jul, 2005

1 commit


20 Jun, 2005

1 commit


18 Jun, 2005

3 commits


17 Apr, 2005

1 commit

  • Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds