Eric Lee / smarc-fsl-linux-kernel

17 Jul, 2007

1 commit

  • cc1ed7542   init: wait for asynchronously scanned block devices ... Browse Code »

    Some buses (e.g. USB and MMC) do their scanning of devices in the
    background, causing a race between them and prepare_namespace(). In order
    to be able to use these buses without an initrd, we now wait for the device
    specified in root= to actually show up.

    If the device never shows up than we will hang in an infinite loop. In
    order to not mess with setups that reboot on panic, the feature must be
    turned on via the command line option "rootwait".

    [bunk@stusta.de: root_wait can become static]
    Signed-off-by: Pierre Ossman
    Cc: Al Viro
    Cc: Christoph Hellwig
    Signed-off-by: Adrian Bunk
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Pierre Ossman
     

10 May, 2007

1 commit

  • dd2a345f8   Display all possible partitions when the root filesystem failed to mount ... Browse Code »

    Display all possible partitions when the root filesystem is not mounted.
    This helps to track spell'o's and missing drivers.

    Updated to work with newer kernels.

    Example output:

    VFS: Cannot open root device "foobar" or unknown-block(0,0)
    Please append a correct "root=" boot option; here are the available partitions:
    0800 8388608 sda driver: sd
    0801 192748 sda1
    0802 8193150 sda2
    0810 4194304 sdb driver: sd
    Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

    [akpm@linux-foundation.org: cleanups, fix printk warnings]
    Signed-off-by: Jan Engelhardt
    Cc: Dave Gilbert
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Dave Gilbert
     

09 May, 2007

1 commit

01 Oct, 2006

1 commit

  • 9361401eb   [PATCH] BLOCK: Make it possible to disable the block layer [try #6] ... Browse Code »

    Make it possible to disable the block layer. Not all embedded devices require
    it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
    the block layer to be present.

    This patch does the following:

    (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
    support.

    (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
    an item that uses the block layer. This includes:

    (*) Block I/O tracing.

    (*) Disk partition code.

    (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

    (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
    block layer to do scheduling. Some drivers that use SCSI facilities -
    such as USB storage - end up disabled indirectly from this.

    (*) Various block-based device drivers, such as IDE and the old CDROM
    drivers.

    (*) MTD blockdev handling and FTL.

    (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
    taking a leaf out of JFFS2's book.

    (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
    linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
    however, still used in places, and so is still available.

    (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
    parts of linux/fs.h.

    (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

    (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

    (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
    is not enabled.

    (*) fs/no-block.c is created to hold out-of-line stubs and things that are
    required when CONFIG_BLOCK is not set:

    (*) Default blockdev file operations (to give error ENODEV on opening).

    (*) Makes some /proc changes:

    (*) /proc/devices does not list any blockdevs.

    (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

    (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

    (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
    given command other than Q_SYNC or if a special device is specified.

    (*) In init/do_mounts.c, no reference is made to the blockdev routines if
    CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.

    (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
    error ENOSYS by way of cond_syscall if so).

    (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
    CONFIG_BLOCK is not set, since they can't then happen.

    Signed-Off-By: David Howells
    Signed-off-by: Jens Axboe

    David Howells
     

26 Sep, 2006

1 commit

  • d779249ed   Driver Core: add ability for drivers to do a threaded probe ... Browse Code »

    This adds the infrastructure for drivers to do a threaded probe, and
    waits at init time for all currently outstanding probes to complete.

    A new kernel thread will be created when the probe() function for the
    driver is called, if the multithread_probe bit is set in the driver
    saying it can support this kind of operation.

    I have tested this with USB and PCI, and it works, and shaves off a lot
    of time in the boot process, but there are issues with finding root boot
    disks, and some USB drivers assume that this can never happen, so it is
    currently not enabled for any bus type. Individual drivers can enable
    this right now if they wish, and bus authors can selectivly turn it on
    as well, once they determine that their subsystem will work properly
    with it.

    Signed-off-by: Greg Kroah-Hartman

    Greg Kroah-Hartman
     

27 Jun, 2006

1 commit

30 May, 2006

1 commit

16 May, 2006

1 commit

  • be6e028b6   [PATCH] root mount failure: emit filesystems attempted ... Browse Code »

    When we fail to mount from a valid root device list out the filesystems we
    have tried to mount it with. This gives the user vital diagnostics as to
    what is missing from their kernel.

    For example in the fragment below the kernel does not have CRAMFS compiled
    into the kernel and yet appears to recognise it at the RAMDISK detect
    stage. Later the mount fails as we don't have the filesystem.

    RAMDISK: cramfs filesystem found at block 0
    RAMDISK: Loading 1604KiB [1 disk] into ram disk... done.
    XFS: bad magic number
    XFS: SB validate failed
    No filesystem could mount root, tried: reiserfs ext3 ext2 msdos vfat
    iso9660 jfs xfs
    Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1)

    Signed-off-by: Andy Whitcroft
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Andy Whitcroft
     

27 Mar, 2006

1 commit

24 Mar, 2006

1 commit

  • 9b04c997b   [PATCH] vfs: MS_VERBOSE should be MS_SILENT ... Browse Code »

    The meaning of MS_VERBOSE is backwards; if the bit is set, it really means,
    "don't be verbose". This is confusing and counter-intuitive.

    In addition, there is also no way to set the MS_VERBOSE flag in the
    mount(8) program in util-linux, but interesting, it does define options
    which would do the right thing if MS_SILENT were defined, which
    unfortunately we do not:

    #ifdef MS_SILENT
    { "quiet", 0, 0, MS_SILENT }, /* be quiet */
    { "loud", 0, 1, MS_SILENT }, /* print out messages. */
    #endif

    So the obvious fix is to deprecate the use of MS_VERBOSE and replace it
    with MS_SILENT.

    Signed-off-by: "Theodore Ts'o"
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Theodore Ts'o
     

02 Sep, 2005

1 commit

15 Jul, 2005

1 commit

13 Jul, 2005

1 commit

17 Apr, 2005

1 commit

  • 1da177e4c   Linux-2.6.12-rc2 ... Browse Code »

    Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds