02 Nov, 2010
1 commit
-
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",Signed-off-by: Uwe Kleine-König
Signed-off-by: Jiri Kosina
31 Oct, 2010
1 commit
-
…nel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
jump label: Add work around to i386 gcc asm goto bug
x86, ftrace: Use safe noops, drop trap test
jump_label: Fix unaligned traps on sparc.
jump label: Make arch_jump_label_text_poke_early() optional
jump label: Fix error with preempt disable holding mutex
oprofile: Remove deprecated use of flush_scheduled_work()
oprofile: Fix the hang while taking the cpu offline
jump label: Fix deadlock b/w jump_label_mutex vs. text_mutex
jump label: Fix module __init section race* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Check irq_remapped instead of remapping_enabled in destroy_irq()
30 Oct, 2010
38 commits
-
* git://git.infradead.org/mtd-2.6: (82 commits)
mtd: fix build error in m25p80.c
mtd: Remove redundant mutex from mtd_blkdevs.c
MTD: Fix wrong check register_blkdev return value
Revert "mtd: cleanup Kconfig dependencies"
mtd: cfi_cmdset_0002: make sector erase command variable
mtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chips
mtd: cfi_util: add support for switching SST 39VF640xB chips into QRY mode
mtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of hardcoded one
block2mtd: dubious assignment
P4080/mtd: Fix the freescale lbc issue with 36bit mode
P4080/eLBC: Make Freescale elbc interrupt common to elbc devices
mtd: phram: use KBUILD_MODNAME
mtd: OneNAND: S5PC110: Fix double call suspend & resume function
mtd: nand: fix MTD_MODE_RAW writes
jffs2: use kmemdup
mtd: sm_ftl: cosmetic, use bool when possible
mtd: r852: remove useless pci powerup/down from suspend/resume routines
mtd: blktrans: fix a race vs kthread_stop
mtd: blktrans: kill BKL
mtd: allow to unload the mtdtrans module if its block devices aren't open
...Fix up trivial whitespace-introduced conflict in drivers/mtd/mtdchar.c
-
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (215 commits)
ARM: memblock: setup lowmem mappings using memblock
ARM: memblock: move meminfo into find_limits directly
ARM: memblock: convert free_highpages() to use memblock
ARM: move freeing of highmem pages out of mem_init()
ARM: memblock: convert memory detail printing to use memblock
ARM: memblock: use memblock to free memory into arm_bootmem_init()
ARM: memblock: use memblock when initializing memory allocators
ARM: ensure membank array is always sorted
ARM: 6466/1: implement flush_icache_all for the rest of the CPUs
ARM: 6464/2: fix spinlock recursion in adjust_pte()
ARM: fix memblock breakage
ARM: 6465/1: Fix data abort accessing proc_info from __lookup_processor_type
ARM: 6460/1: ixp2000: fix type of ixp2000_timer_interrupt
ARM: 6449/1: Fix for compiler warning of uninitialized variable.
ARM: 6445/1: fixup TCM memory types
ARM: imx: Add wake functionality to GPIO
ARM: mx5: Add gpio-keys to mx51 babbage board
ARM: imx: Add gpio-keys to plat-mxc
mx31_3ds: Fix spi registration
mx31_3ds: Fix the logic for detecting the debug board
... -
Conflicts:
drivers/mtd/mtd_blkdevs.cMerge Grant's device-tree bits so that we can apply the subsequent fixes.
Signed-off-by: David Woodhouse
-
Russ Anderson reported:
| There is a regression that is causing a NULL pointer dereference
| in free_irte when shutting down xpc. git bisect narrowed it down
| to git commit d585d06(intr_remap: Simplify the code further), which
| changed free_irte(). Reverse applying the patch fixes the problem.We need to use irq_remapped() for each irq instead of checking only
intr_remapping_enabled as there might be non remapped irqs even when
remapping is enabled.[ tglx: use cfg instead of retrieving it again. Massaged changelog ]
Reported-bisected-and-tested-by: Russ Anderson
Signed-off-by: Yinghai Lu
Cc: Suresh Siddha
LKML-Reference:
Signed-off-by: Thomas Gleixner -
…org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, alternative: Call stop_machine_text_poke() on all cpus
x86-32: Restore irq stacks NUMA-aware allocations
x86, memblock: Fix early_node_mem with big reserved region.* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, uv: More Westmere support on SGI UV
x86, uv: Enable Westmere support on SGI UV -
* 'msm-fixes' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
msm: Kconfig: drop unused config options
msm: fix compile failure when no debug uart is selected
msm: fix debug-macro.S build failure
msm: timer: Decrease shift on timer clocksource
arm: mach-msm: fix error handling in msm_iommu_probe()
msm: fix Kconfig target board selection
msm: fix compile failure on struct membank node member* 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
drivers/video/msm/mddi.c: Remove multiple KERN_ uses
drivers: msm: video: add dev_set_name call
drivers: video: msm: fix hang on disable_irq -
* 'for-2637/s3c24xx-all' of git://git.fluff.org/bjdooks/linux:
ARM: h1940: add UDA1380 to i2c devices list
ARM: h1940: Fix backlight and LCD power functions
ARM: S3C2440: fix boot failure introduced by recent changes in gpiolib
ARM: S3C2440: various fixes in Kconfig file
ARM: rx1950: Add UDA1380 to i2c devices list
ARM: rx1950: Add LEDs support
ARM: rx1950: Add battery device
ARM: h1940: Implement mmc_power function
ARM: h1940: Use gpiolib for latch access -
Register UDA1380 codec during H1940 machine init
Signed-off-by: Vasily Khoruzhick
Signed-off-by: Ben Dooks -
Current implementation of LCD and backlight power control functions
is not complete, as result PDA consumes power in suspend.
Fix this issue by managing state of some latch bits, just like
WinMobile does.Signed-off-by: Vasily Khoruzhick
Signed-off-by: Ben Dooks -
Currently, text_poke_smp() passes a NULL as the third argument to
__stop_machine(), which will only run stop_machine_text_poke()
on 1 cpu. Change NULL -> cpu_online_mask, as stop_machine_text_poke()
is intended to be run on all cpus.I actually didn't notice any problems with stop_machine_text_poke()
only being called on 1 cpu, but found this via code inspection.Signed-off-by: Jason Baron
LKML-Reference:
Acked-by: Mathieu Desnoyers
Acked-by: Masami Hiramatsu
Signed-off-by: H. Peter Anvin -
Recent changes in s3c gpio break mini2440 board and may be others.
The problem is that mach-mini2440.c: mini2440_init()
(where we call s3c_gpio_setpull()) is called before s3c2440.c: s3c2440_init()
(where we initialize s3c24xx_gpiocfg_default.set_pull function pointer).
This causes dereferencing of NULL pointer at boot time and a kernel panic.Signed-off-by: Abdoulaye Walsimou Gaye
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Ben Dooks -
* kconfig symbols defined in arch/arm/mach-s3c2440/Kconfig are only available
when ARCH_S3C2410 is selected, so no need to make some of them depend
on ARCH_S3C2410.
* fix CPU_S3C24405B typo in "config S3C2440_DMA".
* mini2440: remove unconditionally select of SND_S3C24XX_SOC_S3C24XX_UDA134X.
Those fixes avoid the following warnings at make time:scripts/kconfig/qconf arch/arm/Kconfig
warning: (MACH_MINI2440 && ARCH_S3C2410) selects SND_S3C24XX_SOC_S3C24XX_UDA134X
which has unmet direct dependencies (SND_S3C24XX_SOC && ARCH_S3C2410)
warning: (CPU_S3C2440 && ARCH_S3C2410 && S3C2410_DMA) selects S3C2440_DMA which
has unmet direct dependencies (ARCH_S3C2410 && CPU_S3C24405B)
warning: (CPU_S3C2440 && ARCH_S3C2410 || CPU_S3C2442 && ARCH_S3C2410)
selects CPU_S3C244X which has unmet direct dependencies (!ARCH_S3C2410)Signed-off-by: Abdoulaye Walsimou Gaye
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Ben Dooks -
These two config options don't exist, and aren't ever going to.
So I simply delete them.Signed-off-by: Daniel Walker
-
If the board has a debug uart the user is given a choice of which
uart to use. The user can also select NONE, which means not to use one.
In most of our header files when NONE is selected nothing is defined
for MSM_DEBUG_UART_PHYS or MSM_DEBUG_UART_BASE. This causes a compile
failure in debug-macro.S which expect something to be defined there.Example of the failure,
arch/arm/kernel/built-in.o: In function `hexbuf':
linux-2.6/arch/arm/kernel/debug.S:186: undefined reference to `MSM_DEBUG_UART_PHYS'
linux-2.6/arch/arm/kernel/debug.S:186: undefined reference to `MSM_DEBUG_UART_BASE'This fixes the compile failure by adding an ifdef to debug-macro.S
that removes all the debug uart code in the case of NONE.Signed-off-by: Daniel Walker
-
Originally there was an ifdef case to handle when no debug uart
was selected. In commit 0ea1293009826da45e1019f45dfde1e557bb30df
that case was removed which causes the following build failure,linux-2.6/arch/arm/kernel/debug.S: Assembler messages:
linux-2.6/arch/arm/kernel/debug.S:174: Error: bad instruction `addruart r1,r2'
linux-2.6/arch/arm/kernel/debug.S:176: Error: bad instruction `waituart r2,r3'
linux-2.6/arch/arm/kernel/debug.S:177: Error: bad instruction `senduart r1,r3'
linux-2.6/arch/arm/kernel/debug.S:178: Error: bad instruction `busyuart r2,r3'
linux-2.6/arch/arm/kernel/debug.S:190: Error: bad instruction `addruart r1,r2'This is a partial revert to add back the case which was removed with
two caveats. First the API for the addruart macro was updated, and
the new addruart case now return 0xfff00000 so that a know IO mapping
is created instead of a random one.Cc: Jeremy Kerr
Cc: Lorenzo Pieralisi
Cc: Jason Wang
Cc: Tony Lindgren
Cc: Nicolas Pitre
Cc: Russell King - ARM Linux
Signed-off-by: Daniel Walker -
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kgdb,ppc: Individual register get/set for ppc
kgdbts: prevent re-entry to kgdbts before it unregisters
debug_core,x86,blackfin: Clean up hw debug disable API
kdb: Fix early debugging crash regression
kgdb,arm: fix register dump
kdb: fix per_cpu command to remove supress mask
kdb: Add kdb kernel module sample -
On i386 (not x86_64) early implementations of gcc would have a bug
with asm goto causing it to produce code like the following:(This was noticed by Peter Zijlstra)
56 pushl 0
67 nopl jmp 0x6f
popl
jmp 0x8c6f mov
test
je 0x8c8c mov
call *(%esp)The jump added in the asm goto skipped over the popl that matched
the pushl 0, which lead up to a quick crash of the system when
the jump was enabled. The nopl is defined in the asm goto () statement
and when tracepoints are enabled, the nop changes to a jump to the label
that was specified by the asm goto. asm goto is suppose to tell gcc that
the code in the asm might jump to an external label. Here gcc obviously
fails to make that work.The bug report for gcc is here:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46226
The bug only appears on x86 when not compiled with
-maccumulate-outgoing-args. This option is always set on x86_64 and it
is also the work around for a function graph tracer i386 bug.
(See commit: 746357d6a526d6da9d89a2ec645b28406e959c2e)
This explains why the bug only showed up on i386 when function graph
tracer was not enabled.This patch now adds a CONFIG_JUMP_LABEL option that is default
off instead of using jump labels by default. When jump labels are
enabled, the -maccumulate-outgoing-args will be used (causing a
slightly larger kernel image on i386). This option will exist
until we have a way to detect if the gcc compiler in use is safe
to use on all configurations without the work around.Note, there exists such a test, but for now we will keep the enabling
of jump label as a manual option.Archs that know the compiler is safe with asm goto, may choose to
select JUMP_LABEL and enable it by default.Reported-by: Ingo Molnar
Cause-discovered-by: Peter Zijlstra
Cc: Peter Zijlstra
Cc: Thomas Gleixner
Cc: Jason Baron
Cc: H. Peter Anvin
Cc: David Daney
Cc: Mathieu Desnoyers
Cc: Masami Hiramatsu
Cc: David Miller
Cc: Richard Henderson
LKML-Reference:
Signed-off-by: Steven Rostedt -
commit 534af1082329392bc29f6badf815e69ae2ae0f4c(kgdb,kdb: individual
register set and and get API) introduce dbg_get_reg/dbg_set_reg API
for individual register get and set.This patch implement those APIs for ppc.
Signed-off-by: Dongdong Deng
Signed-off-by: Jason Wessel -
The kgdb_disable_hw_debug() was an architecture specific function for
disabling all hardware breakpoints on a per cpu basis when entering
the debug core.This patch will remove the weak function kdbg_disable_hw_debug() and
change it into a call back which lives with the rest of hw breakpoint
call backs in struct kgdb_arch.Signed-off-by: Dongdong Deng
Signed-off-by: Jason Wessel -
DBG_MAX_REG_NUM incorrectly had the number of indices in the GDB regs
array rather than the number of registers, leading to an oops when the
"rd" command is used in KDB.Cc: stable@kernel.org
Signed-off-by: Rabin Vincent
Signed-off-by: Jason Wessel -
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (46 commits)
ftrace/MIPS: Enable C Version of recordmcount
ftrace/MIPS: Add module support for C version of recordmcount
ftrace/MIPS: Add MIPS64 support for C version of recordmcount
MIPS: Make TASK_SIZE reflect proper size for both 32 and 64 bit processes.
MIPS: Allow UserLocal on MIPS_R1 processors
MIPS: Honor L2 bypass bit
MIPS: Add BMIPS CP0 register definitions
MIPS: Add BMIPS processor types to Kconfig
MIPS: Decouple BMIPS CPU support from bcm47xx/bcm63xx SoC code
MIPS: Add support for hardware performance events (mipsxx)
MIPS: Perf-events: Add callchain support
MIPS: add support for hardware performance events (skeleton)
MIPS: add support for software performance events
MIPS: define local_xchg from xchg_local to atomic_long_xchg
MIPS: AR7: Add support for Titan (TNETV10xx) SoC variant
MIPS: AR7: Initialize GPIO earlier
MIPS: Add platform device and Kconfig for Octeon USB EHCI / OHCI
USB: Add EHCI and OHCH glue for OCTEON II SOCs.
MIPS: Octeon: Add register definitions for EHCI / OHCI USB glue logic.
MIPS: Octeon: Apply CN63XXP1 errata workarounds.
... -
Selects HAVE_C_RECORDMCOUNT to use the C version of the recordmcount
intead of the old Perl Version of recordmcount.Signed-off-by: Wu Zhangjin
LKML-Reference:
Signed-off-by: Steven Rostedt
Signed-off-by: Ralf Baechle -
The TASK_SIZE macro should reflect the size of a user process virtual
address space. Previously for 64-bit kernels, this was not the case.
The immediate cause of pain was in
hugetlbfs/inode.c:hugetlb_get_unmapped_area() where 32-bit processes
trying to mmap a huge page would be served a page with an address
outside of the 32-bit address range. But there are other uses of
TASK_SIZE in the kernel as well that would like an accurate value.The new definition is nice because it now makes TASK_SIZE and
TASK_SIZE_OF() yield the same value for any given process.For 32-bit kernels there should be no change, although I did factor
out some code in asm/processor.h that became identical for the 32-bit and
64-bit cases.__UA_LIMIT is now set to ~((1 << SEGBITS) - 1) for 64-bit kernels.
This should eliminate the possibility of getting a
AddressErrorException in the kernel for addresses that pass the
access_ok() test.With the patch applied, I can still run o32, n32 and n64 processes,
and have an o32 shell fork/exec both n32 and n64 processes.Signed-off-by: David Daney
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1701/ -
Some MIPS32R1 processors implement UserLocal (RDHWR $29) to accelerate
programs that make extensive use of thread-local storage. Therefore,
setting up the HWRENA register should not depend on cpu_has_mips_r2.Signed-off-by: Kevin Cernekee
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org -
On many of the newer MIPS32 cores, CP0 CONFIG2 bit 12 (L2B) indicates
that the L2 cache is disabled and therefore Linux should not attempt
to use it.[Ralf: Moved the code added by Kevin's original patch into a separate
function that can easily be replaced for platforms that need more a
different probe.]Signed-off-by: Kevin Cernekee
Cc: linux-mips@linux-mips.org>
Cc:
Patchwork: https://patchwork.linux-mips.org/patch/1723/
Signed-off-by: Ralf Baechle -
Signed-off-by: Kevin Cernekee
Cc: mbizon@freebox.fr
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Florian Fainelli
Patchwork: https://patchwork.linux-mips.org/patch/1708/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org -
[v2: add "VIPER" marketing name for BMIPS4350]
Add processor feature definitions for BMIPS3300, BMIPS4350, BMIPS4380,
and BMIPS5000.Signed-off-by: Kevin Cernekee
Cc: mbizon@freebox.fr
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Florian Fainelli
Patchwork: https://patchwork.linux-mips.org/patch/1716/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org -
BMIPS processor cores are used in 50+ different chipsets spread across
5+ product lines. In many cases the chipsets do not share the same
peripheral register layouts, the same register blocks, the same
interrupt controllers, the same memory maps, or much of anything else.But, across radically different SoCs that share nothing more than the
same BMIPS CPU, a few things are still mostly constant:SMP operations
Access to performance counters
DMA cache coherency quirks
Cache and memory bus configurationSo, it makes sense to treat each BMIPS processor type as a generic
"building block," rather than tying it to a specific SoC. This makes it
easier to support a large number of BMIPS-based chipsets without
unnecessary duplication of code, and provides the infrastructure needed
to support BMIPS-proprietary features.Signed-off-by: Kevin Cernekee
Cc: mbizon@freebox.fr
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Florian Fainelli
Patchwork: https://patchwork.linux-mips.org/patch/1706/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org -
This patch adds the mipsxx Perf-events support based on the skeleton.
Generic hardware events and cache events are now fully implemented for
the 24K/34K/74K/1004K cores. To support other cores in mipsxx (such as
R10000/SB1), the generic hardware event tables and cache event tables
need to be filled out. To support other CPUs which have different PMU
than mipsxx, such as RM9000 and LOONGSON2, the additional files
perf_event_$cpu.c need to be created.Raw event is an important part of Perf-events. It helps the user collect
performance data for events that are not listed as the generic hardware
events and cache events but ARE supported by the CPU's PMU.This patch also adds this feature for mipsxx 24K/34K/74K/1004K. For how to
use it, please refer to processor core software user's manual and the
comments for mipsxx_pmu_map_raw_event() for more details.Please note that this is a "precise" implementation, which means the
kernel will check whether the requested raw events are supported by this
CPU and which hardware counters can be assigned for them.To test the functionality of Perf-event, you may want to compile the tool
"perf" for your MIPS platform. You can refer to the following URL:
http://www.linux-mips.org/archives/linux-mips/2010-10/msg00126.htmlYou also need to customize the CFLAGS and LDFLAGS in tools/perf/Makefile
for your libs, includes, etc.In case you encounter the boot failure in SMVP kernel on multi-threading
CPUs, you may take a look at:
http://www.linux-mips.org/git?p=linux-mti.git;a=commitdiff;h=5460815027d802697b879644c74f0e8365254020Signed-off-by: Deng-Cheng Zhu
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Cc: ddaney@caviumnetworks.com
Cc: matt@console-pimps.org
Patchwork: https://patchwork.linux-mips.org/patch/1689/
Signed-off-by: Ralf Baechlecreate mode 100644 arch/mips/kernel/perf_event_mipsxx.c
-
Adds callchain support for MIPS Perf-events. For more info on this feature,
please refer to tools/perf/Documentation/perf-report.txt and
tools/perf/design.txt.Currently userspace callchain data is not recorded, because we do not have
a safe way to do this.Signed-off-by: Deng-Cheng Zhu
Acked-by: David Daney
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Cc: matt@console-pimps.org
Patchwork: https://patchwork.linux-mips.org/patch/1690/
Signed-off-by: Ralf Baechle -
This patch provides the skeleton of the HW perf event support. To enable
this feature, we can not choose the SMTC kernel; Oprofile should be
disabled; kernel performance events be selected. Then we can enable it in
Kernel type menu.Oprofile for MIPS platforms initializes irq at arch init time. Currently
we do not change this logic to allow PMU reservation.If a platform has EIC, we can use the irq base and perf counter irq offset
defines for the interrupt controller in specific init_hw_perf_events().Based on this skeleton patch, the 3 different kinds of MIPS PMU, namely,
mipsxx/loongson2/rm9000, can be supported by adding corresponding lower
level C files at the bottom. The suggested names of these files are
perf_event_mipsxx.c/perf_event_loongson2.c/perf_event_rm9000.c. So, for
example, we can do this by adding "#include perf_event_mipsxx.c" at the
bottom of perf_event.c.In addition, PMUs with 64bit counters are also considered in this patch.
Signed-off-by: Deng-Cheng Zhu
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Cc: ddaney@caviumnetworks.com
Cc: matt@console-pimps.org
Patchwork: https://patchwork.linux-mips.org/patch/1688/
Signed-off-by: Ralf Baechle -
Software events are required as part of the measurable stuff by the
Linux performance counter subsystem. Here is the list of events added by
this patch:
PERF_COUNT_SW_PAGE_FAULTS
PERF_COUNT_SW_PAGE_FAULTS_MIN
PERF_COUNT_SW_PAGE_FAULTS_MAJ
PERF_COUNT_SW_ALIGNMENT_FAULTS
PERF_COUNT_SW_EMULATION_FAULTSSigned-off-by: Deng-Cheng Zhu
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Acked-by: David Daney
Reviewed-by: Matt Fleming
Patchwork: https://patchwork.linux-mips.org/patch/1686/
Signed-off-by: Ralf Baechle -
Perf-events is now using local_t helper functions internally. There is a
use of local_xchg(). On MIPS, this is defined to xchg_local() which is
missing in asm/system.h. This patch re-defines local_xchg() in asm/local.h
to atomic_long_xchg(). Then Perf-events can pass the build.Signed-off-by: Deng-Cheng Zhu
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Cc: ddaney@caviumnetworks.com
Cc: matt@console-pimps.org
Patchwork: https://patchwork.linux-mips.org/patch/1687/
Signed-off-by: Ralf Baechle -
Add support for Titan TNETV1050,1055,1056,1060 variants. This SoC is almost
completely identical to AR7 except on a few points:
- a second bank of gpios is available
- vlynq0 on titan is vlynq1 on ar7
- different PHY addresses for cpmac0This SoC can be found on commercial products like the Linksys WRTP54G
Original patch by Xin with improvments by Florian.
Signed-off-by: Xin Zhen
Signed-off-by: Florian Fainelli
Patchwork: http://patchwork.linux-mips.org/patch/1563/
Signed-off-by: Ralf Baechle---
-
In order to detect the Titan variant, we must initialize GPIOs earlier since
detection relies on some GPIO values to be set.Signed-off-by: Florian Fainelli
Patchwork: http://patchwork.linux-mips.org/patch/1562/
Signed-off-by: Ralf Baechle---
