07 Nov, 2015
1 commit
-
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for 88pm860; 88pm80x
- Add support for 24c08 EEPROM; at24
- Add support for Broxton Whiskey Cove; intel*
- Add support for RTS522A; rts5227
- Add support for I2C devices; intel_quark_i2c_gpioNew Functionality:
- Add microphone support; arizona
- Add general purpose switch support; arizona
- Add fuel-gauge support; da9150-core
- Add shutdown support; sec-core
- Add charger support; tps65217
- Add flexible serial communication unit support; atmel-flexcom
- Add power button support; axp20x
- Add led-flash support; rt5033Core Frameworks:
- Supply a generic macro for defining Regmap IRQs
- Rework ACPI child device matchingFix-ups:
- Use Regmap to access registers; tps6105x
- Use DEFINE_RES_IRQ_NAMED() macro; da9150
- Re-arrange device registration order; intel_quark_i2c_gpio
- Allow OF matching; cros_ec_i2c, atmel-hlcdc, hi6421-pmic, max8997, sm501
- Handle deferred probe; twl6040
- Improve accuracy of headphone detect; arizona
- Unnecessary MODULE_ALIAS() removal; bcm590xx, rt5033
- Remove unused code; htc-i2cpld, arizona, pcf50633-irq, sec-core
- Simplify code; kempld, rts5209, da903x, lm3533, da9052, arizona
- Remove #iffery; arizona
- DT binding adaptions; manyBug Fixes:
- Fix possible NULL pointer dereference; wm831x, tps6105x
- Fix 64bit bug; intel_soc_pmic_bxtwc
- Fix signedness issue; arizona"* tag 'mfd-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits)
bindings: mfd: s2mps11: Add documentation for s2mps15 PMIC
mfd: sec-core: Remove unused s2mpu02-rtc and s2mpu02-clk children
extcon: arizona: Add extcon specific device tree binding document
MAINTAINERS: Add binding docs for Cirrus Logic/Wolfson Arizona devices
mfd: arizona: Remove bindings covered in new subsystem specific docs
mfd: rt5033: Add RT5033 Flash led sub device
mfd: lpss: Add Intel Broxton PCI IDs
mfd: lpss: Add Broxton ACPI IDs
mfd: arizona: Signedness bug in arizona_runtime_suspend()
mfd: axp20x: Add a cell for the power button part of the, axp288 PMICs
mfd: dt-bindings: Document pulled down WRSTBI pin on S2MPS1X
mfd: sec-core: Disable buck voltage reset on watchdog falling edge
mfd: sec-core: Dump PMIC revision to find out the HW
mfd: arizona: Use correct type ID for device tree config
mfd: arizona: Remove use of codec build config #ifdefs
mfd: arizona: Simplify adding subdevices
mfd: arizona: Downgrade type mismatch messages to dev_warn
mfd: arizona: Factor out checking of jack detection state
mfd: arizona: Factor out DCVDD isolation control
mfd: Make TPS6105X select REGMAP_I2C
...
31 Oct, 2015
1 commit
-
The invoked functions already return zero on success or a negative
errno code so there is no need to open code the logic in the caller.Signed-off-by: Javier Martinez Canillas
Acked-by: Adam Thomson
Signed-off-by: Lee Jones
28 Oct, 2015
1 commit
-
An spi_driver does not need to set an owner, it will be populated by the
driver core.Signed-off-by: Andrew F. Davis
Acked-by: Jonathan Cameron
Signed-off-by: Mark Brown
12 Mar, 2015
1 commit
-
The range of registers used by this driver exceeds that available
via SPI with no paging (127), so we have to override the values
from the default config which is set-up for I2C access.
Also change SPI settings to match device's recommended OTP values.Signed-off-by: Adam Ward
Signed-off-by: Lee Jones
26 Sep, 2014
1 commit
-
Current code init regmap with &da9052_regmap_config for both da9052-spi and
da9052-i2c drivers. da9052-spi sets the read_flag_mask.
The same setting may be applied for da9052-i2c if da9052-spi driver is loaded
first because they actually use the same regmap_config setting.
Fix this issue by using a local variable for regmap_config in da9052-spi driver,
so the settings in spi driver won't impact the settings in i2c driver.
Also makes da9052_regmap_config const to avoid similar issue.Signed-off-by: Axel Lin
Acked-by: Adam Thomson
Signed-off-by: Lee Jones
19 Mar, 2014
1 commit
-
Add support for a new BC variant of the DA9053 PMIC.
There is one difference between it and the AA, BA and BB.
This patch also corrects a typing mistake in one of the BA
name strings that was incorrectly typed as "ab".Signed-off-by: Anthony Olech
Signed-off-by: Lee Jones
09 Apr, 2013
1 commit
-
Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.Signed-off-by: Jingoo Han
Signed-off-by: Samuel Ortiz
29 Nov, 2012
3 commits
-
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.Signed-off-by: Bill Pemberton
Cc: Srinidhi Kasagar
Cc: Peter Tyser
Cc: Daniel Walker
Cc: Bryan Huntsman
Acked-by: David Brown
Acked-by: Linus Walleij
Acked-by: Mark Brown
Signed-off-by: Greg Kroah-Hartman -
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.Signed-off-by: Bill Pemberton
Cc: Srinidhi Kasagar
Cc: Peter Tyser
Cc: Daniel Walker
Cc: Bryan Huntsman
Acked-by: David Brown
Acked-by: Mark Brown
Signed-off-by: Greg Kroah-Hartman -
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.Signed-off-by: Bill Pemberton
Cc: Srinidhi Kasagar
Cc: Peter Tyser
Cc: Daniel Walker
Cc: Bryan Huntsman
Acked-by: David Brown
Acked-by: Linus Walleij
Acked-by: Mark Brown
Signed-off-by: Greg Kroah-Hartman
20 May, 2012
1 commit
-
Signed-off-by: Axel Lin
Signed-off-by: Samuel Ortiz
01 May, 2012
1 commit
-
In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_driver_register() so
we can drop the manual assignment.The patch was generated using the following coccinelle semantic patch:
//
@@
identifier _driver;
@@
struct spi_driver _driver = {
.driver = {
- .bus = &spi_bus_type,
},
};
//Signed-off-by: Lars-Peter Clausen
Cc: Srinidhi Kasagar
Acked-by: Linus Walleij
Signed-off-by: Samuel Ortiz
07 Mar, 2012
2 commits
-
Add __devinit annotation for da9052_spi_probe to fix below build warning:
WARNING: drivers/built-in.o(.text+0x349b4): Section mismatch in reference from the function da9052_spi_probe() to the function .devinit.text:da9052_device_init()
The function da9052_spi_probe() references
the function __devinit da9052_device_init().
This is often because da9052_spi_probe lacks a __devinit
annotation or the annotation of da9052_device_init is wrong.Also add __devexit annotation for da9052_spi_remove because we have
__devexit_p around it in the remove callback.Signed-off-by: Axel Lin
Signed-off-by: Samuel Ortiz -
Signed-off-by: Axel Lin
Signed-off-by: Samuel Ortiz
14 Dec, 2011
1 commit
-
This patch add SPI support for DA9052/53 MFD core module.
This patch is functionally tested on Samsung SMDKV6410.
Signed-off-by: David Dajun Chen
Signed-off-by: Ashish Jangam
Acked-by: Samuel Ortiz
Signed-off-by: Mark Brown