12 Mar, 2016
2 commits
-
Some of platforms like Nvidia's Tegra210 Jetson-TX1 platform has
multiple PMW based regulators. Add support to have multiple instances
of the driver by not changing any global data of pwm regulator and
if required, making instance specific copy and then making changes.Signed-off-by: Laxman Dewangan
Signed-off-by: Mark Brown -
With following equation for calculating
voltage_to_duty_cycle_percentage
100 - (((req_uV * 100) - (min_uV * 100)) / diff);we get 0% for max_uV and 100% for min_uV.
Correcting this to
((req_uV * 100) - (min_uV * 100)) / diff;
to get proper duty cycle.Signed-off-by: Laxman Dewangan
Signed-off-by: Mark Brown
22 Sep, 2015
1 commit
-
Implement the ->enable(), ->disable() and ->is_enabled methods and remove
the PWM call in ->set_voltage_sel().
This is particularly important for critical regulators tagged as always-on,
because not claiming the PWM (and its dependencies) might lead to
unpredictable behavior (like a system hang because the PWM clk is only
claimed when the PWM device is enabled).Signed-off-by: Boris Brezillon
Signed-off-by: Mark Brown
11 Jul, 2015
3 commits
-
drivers/regulator/pwm-regulator.c:
In function ‘pwm_regulator_init_table’:
drivers/regulator/pwm-regulator.c:171:14:
warning: comparison between signed and unsigned integer expressions [-Wsign-compare]Signed-off-by: Lee Jones
Signed-off-by: Mark Brown -
drivers/regulator/pwm-regulator.c:
In function 'pwm_regulator_init_table':
drivers/regulator/pwm-regulator.c:172:14:
warning: 'length' is used uninitialized in this function [-Wuninitialized]
if ((length < sizeof(*duty_cycle_table)) ||
^
Reported-by: kbuild test robot
Signed-off-by: Lee Jones
Signed-off-by: Mark Brown -
drivers/regulator/pwm-regulator.c:
In function 'pwm_regulator_init_continuous':
drivers/regulator/pwm-regulator.c:202:22:
warning: unused variable 'np' [-Wunused-variable]
struct device_node *np = pdev->dev.of_node;
^
Reported-by: kbuild test robot
Signed-off-by: Lee Jones
Signed-off-by: Mark Brown
10 Jul, 2015
2 commits
-
Remove over-bracketing, use framework API to fetch PWM period and
be more forthcoming that pwm_voltage_to_duty_cycle() actually returns
duty cycle as a percentage, rather than a register value.Signed-off-by: Lee Jones
Signed-off-by: Mark Brown -
In "[3d7ef30] regulator: pwm-regulator: Simplify voltage to duty-cycle
call" we stopped using max_duty_cycle, so we can retire it from device
data and DT.There is no need to deprecate this property, as it hasn't hit Mainline
yet.Signed-off-by: Lee Jones
Signed-off-by: Mark Brown
08 Jul, 2015
3 commits
-
Perhaps this is just personal preference, but ...
This patch introduces a new local variable to receive and test regulator
initialisation data. It simplifies and cleans up the code making it
that little bit easier to read and maintain. The local value is assigned
to the structure attribute when all the others are. This is the way we
usually do things.Prevents this kind of nonsense:
this->is->just.silly = fetch_silly_value(&pointer);
if (!this->is->just.silly) {
printk("Silly value failed: %d\n", this->is->just.silly);
return this->is->just.silly;
}Signed-off-by: Lee Jones
Signed-off-by: Mark Brown -
If we reverse some of the logic and change the formula used,
we can simplify the function greatly.It is intentional that this function is supplied and then re-worked
within the same patch-set. The submission in the previous patch is
the tried and tested (i.e. in real releases) method written by ST.
This patch contains a simplification provided later. It looks and
performs better, but doesn't have the same time-under-test that the
original method does. The idea is that we keep some history in
order to provide an easy way back i.e. revert.Signed-off-by: Lee Jones
Signed-off-by: Mark Brown -
The current version of PWM regulator only supports a static table
approach, where pre-calculated values are supplied by the vendor and
obtained via DT. The continuous-voltage method takes min_uV and
max_uV, and divides the difference between them up into a number of
slices. The number of slices depend on how large the duty cycle
register is. This information is provided by a DT property.As the name alludes, this provides values for a continuous voltage
range between min_uV and max_uV, which has obvious benefits over
either limited voltage possibilities, or the requirement to provide
a large voltage-table.Signed-off-by: Lee Jones
Signed-off-by: Mark Brown
07 Jul, 2015
1 commit
-
Take this out of the main .probe() routine in order to facilitate the
introduction of different ways to obtain 'duty cycle' information.Signed-off-by: Lee Jones
Signed-off-by: Mark Brown
09 Jun, 2015
3 commits
-
Signed-off-by: Lee Jones
Signed-off-by: Mark Brown -
The core framework already takes care of this.
Signed-off-by: Lee Jones
Signed-off-by: Mark Brown -
The Regulator Device keeps a full copy of it's own, which can be easily accessed.
Signed-off-by: Lee Jones
Signed-off-by: Mark Brown
15 Dec, 2014
1 commit
-
Pull driver core update from Greg KH:
"Here's the set of driver core patches for 3.19-rc1.They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes,
just removing a line in a structure.Other than that, a few minor driver core and debugfs changes. There
are some ath9k patches coming in through this tree that have been
acked by the wireless maintainers as they relied on the debugfs
changes.Everything has been in linux-next for a while"
* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
fs: debugfs: add forward declaration for struct device type
firmware class: Deletion of an unnecessary check before the function call "vunmap"
firmware loader: fix hung task warning dump
devcoredump: provide a one-way disable function
device: Add dev__once variants
ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
ath: use seq_file api for ath9k debugfs files
debugfs: add helper function to create device related seq_file
drivers/base: cacheinfo: remove noisy error boot message
Revert "core: platform: add warning if driver has no owner"
drivers: base: support cpu cache information interface to userspace via sysfs
drivers: base: add cpu_device_create to support per-cpu devices
topology: replace custom attribute macros with standard DEVICE_ATTR*
cpumask: factor out show_cpumap into separate helper function
driver core: Fix unbalanced device reference in drivers_probe
driver core: fix race with userland in device_add()
sysfs/kernfs: make read requests on pre-alloc files use the buffer.
sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
fs: sysfs: return EGBIG on write if offset is larger than file size
...
27 Nov, 2014
1 commit
-
The of_get_regulator_init_data() function is used to extract the regulator
init_data but information on how to extract certain data is defined in the
static regulator descriptor (e.g: how to map the hardware operating modes).Add a const struct regulator_desc * parameter to the function signature so
the parsing logic could use the information in the struct regulator_desc.of_get_regulator_init_data() relies on of_get_regulation_constraints() to
actually extract the init_data so it has to pass the struct regulator_desc
but that is modified on a later patch.Signed-off-by: Javier Martinez Canillas
Signed-off-by: Mark Brown
20 Oct, 2014
1 commit
-
A platform_driver does not need to set an owner, it will be populated by the
driver core.Signed-off-by: Wolfram Sang
28 Sep, 2014
1 commit
-
rename st-pwm to pwm-regulator. And support getting voltage & duty table from
device tree, other platforms can also use this driver without any modify.Signed-off-by: Chris Zhong
Reviewed-by: Doug Anderson
Tested-by: Doug Anderson
Signed-off-by: Mark Brown
