20 Sep, 2019
1 commit
-
Pull y2038 vfs updates from Arnd Bergmann:
"Add inode timestamp clamping.This series from Deepa Dinamani adds a per-superblock minimum/maximum
timestamp limit for a file system, and clamps timestamps as they are
written, to avoid random behavior from integer overflow as well as
having different time stamps on disk vs in memory.At mount time, a warning is now printed for any file system that can
represent current timestamps but not future timestamps more than 30
years into the future, similar to the arbitrary 30 year limit that was
added to settimeofday().This was picked as a compromise to warn users to migrate to other file
systems (e.g. ext4 instead of ext3) when they need the file system to
survive beyond 2038 (or similar limits in other file systems), but not
get in the way of normal usage"* tag 'y2038-vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
ext4: Reduce ext4 timestamp warnings
isofs: Initialize filesystem timestamp ranges
pstore: fs superblock limits
fs: omfs: Initialize filesystem timestamp ranges
fs: hpfs: Initialize filesystem timestamp ranges
fs: ceph: Initialize filesystem timestamp ranges
fs: sysv: Initialize filesystem timestamp ranges
fs: affs: Initialize filesystem timestamp ranges
fs: fat: Initialize filesystem timestamp ranges
fs: cifs: Initialize filesystem timestamp ranges
fs: nfs: Initialize filesystem timestamp ranges
ext4: Initialize timestamps limits
9p: Fill min and max timestamps in sb
fs: Fill in max and min timestamps in superblock
utimes: Clamp the timestamps before update
mount: Add mount warning for impending timestamp expiry
timestamp_truncate: Replace users of timespec64_trunc
vfs: Add timestamp_truncate() api
vfs: Add file timestamp range support
30 Aug, 2019
1 commit
-
Fill in the appropriate limits to avoid inconsistencies
in the vfs cached inode times when timestamps are
outside the permitted range.Reference: http://www.ecma-international.org/publications/standards/Ecma-119.htm
Signed-off-by: Deepa Dinamani
Acked-by: Jeff Layton
01 Aug, 2019
1 commit
-
There are 3 remaining files without an extension inside the fs docs
dir.Manually convert them to ReST.
In the case of the nfs/exporting.rst file, as the nfs docs
aren't ported yet, I opted to convert and add a :orphan: there,
with should be removed when it gets added into a nfs-specific
part of the fs documentation.Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Jonathan Corbet
31 May, 2019
1 commit
-
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation inc 675 mass ave cambridge ma 02139 usa
either version 2 of the license or at your option any later version
incorporated herein by referenceextracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 4 file(s).
Signed-off-by: Thomas Gleixner
Reviewed-by: Richard Fontana
Reviewed-by: Allison Randal
Reviewed-by: Kate Stewart
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190524100844.465381181@linutronix.de
Signed-off-by: Greg Kroah-Hartman
21 May, 2019
2 commits
-
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:GPL-2.0-only
Signed-off-by: Thomas Gleixner
Signed-off-by: Greg Kroah-Hartman -
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the fileThese files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:GPL-2.0-only
Signed-off-by: Thomas Gleixner
Signed-off-by: Greg Kroah-Hartman
02 May, 2019
1 commit
-
Signed-off-by: Al Viro
30 Sep, 2018
1 commit
-
Redirect some older email addresses that are in the git logs.
Signed-off-by: Matthew Wilcox
21 Aug, 2018
1 commit
-
The largest block size supported by isofs is ISOFS_BLOCK_SIZE (2048), but
isofs_fill_super calls sb_min_blocksize and sets the blocksize to the
device's logical block size if it's larger than what we ended up with after
option parsing.If for some reason we try to mount a hard 4k device as an isofs filesystem,
we'll set opt.blocksize to 4096, and when we try to read the superblock
we found via:block = iso_blknum << (ISOFS_BLOCK_BITS - s->s_blocksize_bits)
with s_blocksize_bits greater than ISOFS_BLOCK_BITS, we'll have a negative
shift and the bread will fail somewhat cryptically:isofs_fill_super: bread failed, dev=sda, iso_blknum=17, block=-2147483648
It seems best to just catch and clearly reject mounts of such a device.
Reported-by: Bryan Gurney
Signed-off-by: Eric Sandeen
Signed-off-by: Jan Kara
16 Apr, 2018
1 commit
-
When specifying string type mount option (e.g., iocharset)
several times in a mount, current option parsing may
cause memory leak. Hence, call kfree for previous one
in this case. Meanwhile, check memory allocation result
for it.Signed-off-by: Chengguang Xu
Signed-off-by: Jan Kara
11 Apr, 2018
1 commit
-
As part of the effort to remove VLAs from the kernel[1], this changes
the allocation of the bhs and pages arrays from being on the stack to being
kcalloc()ed. This also allows for the removal of the explicit zeroing
of bhs.https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Kyle Spiers
Signed-off-by: Jan Kara
28 Nov, 2017
1 commit
-
This is a pure automated search-and-replace of the internal kernel
superblock flags.The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro
Signed-off-by: Linus Torvalds
15 Nov, 2017
1 commit
-
Pull quota, ext2, isofs and udf fixes from Jan Kara:
- two small quota error handling fixes
- two isofs fixes for architectures with signed char
- several udf block number overflow and signedness fixes
- ext2 rework of mount option handling to avoid GFP_KERNEL allocation
with spinlock held- ... it also contains a patch to implement auditing of responses to
fanotify permission events. That should have been in the fanotify
pull request but I mistakenly merged that patch into a wrong branch
and noticed only now at which point I don't think it's worth rebasing
and redoing.* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: be aware of error from dquot_initialize
quota: fix potential infinite loop
isofs: use unsigned char types consistently
isofs: fix timestamps beyond 2027
udf: Fix some sign-conversion warnings
udf: Fix signed/unsigned format specifiers
udf: Fix 64-bit sign extension issues affecting blocks > 0x7FFFFFFF
udf: Remove some outdate references from documentation
udf: Avoid overflow when session starts at large offset
ext2: Fix possible sleep in atomic during mount option parsing
ext2: Parse mount options into a dedicated structure
audit: Record fanotify access control decisions
02 Nov, 2017
1 commit
-
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.By default all files without license information are under the default
license of the kernel, which is GPL version 2.Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if
Reviewed-by: Philippe Ombredanne
Reviewed-by: Thomas Gleixner
Signed-off-by: Greg Kroah-Hartman
01 Nov, 2017
2 commits
-
Based on the discussion about the signed character field for the year,
I went through all fields in the iso9660 and rockridge standards to see
whether they should used signed or unsigned characters. Only a single
8-bit value is defined as signed per 'section 7.1.2': the timezone
offset in a timestamp, this has always been handled correctly through
explicit sign-extension.All others are either '7.1.1 8-bit unsigned numerical values' or
composite fields. I also read the linux source code and came to the
same conclusion, also I could not find any other part of the
implementation that actually behaves differently for signed or
unsigned values.Since it is still ambigous to use plain 'char' in interface definitions,
I'm changing all fields representing numbers and reserved bytes to
the unambiguous '__u8'. Fields that hold actual strings are left as
'char' arrays. I built the code with '-Wpointer-sign -Wsign-compare'
to see if anything got left out, but couldn't find anything wrong
with the remaining warnings.This patch should not change runtime behavior and does not need to
be backported.Signed-off-by: Arnd Bergmann
Signed-off-by: Jan Kara -
isofs uses a 'char' variable to load the number of years since
1900 for an inode timestamp. On architectures that use a signed
char type by default, this results in an invalid date for
anything beyond 2027.This changes the function argument to a 'u8' array, which
is defined the same way on all architectures, and unambiguously
lets us use years until 2155.This should be backported to all kernels that might still be
in use by that date.Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann
Signed-off-by: Jan Kara
18 Sep, 2017
1 commit
-
The new isofs_show_options() function fails to build when CONFIG_NLS
is disabled:fs/isofs/inode.c: In function 'isofs_show_options':
fs/isofs/inode.c:518:44: error: 'CONFIG_NLS_DEFAULT' undeclared (first use in this function)
fs/isofs/inode.c:518:44: note: each undeclared identifier is reported only once for each function it appears inThis adds a check for CONFIG_JOLIET (which selects NLS), matching
the other uses of the iocharset handling in this file.Fixes: 6fecb86a44f5 ("isofs: Implement show_options")
Signed-off-by: Arnd Bergmann
Signed-off-by: Jan Kara
15 Sep, 2017
1 commit
-
Pull mount flag updates from Al Viro:
"Another chunk of fmount preparations from dhowells; only trivial
conflicts for that part. It separates MS_... bits (very grotty
mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
only a small subset of MS_... stuff).This does *not* convert the filesystems to new constants; only the
infrastructure is done here. The next step in that series is where the
conflicts would be; that's the conversion of filesystems. It's purely
mechanical and it's better done after the merge, so if you could run
something likelist=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')
sed -i -e 's/\/SB_RDONLY/g' \
-e 's/\/SB_NOSUID/g' \
-e 's/\/SB_NODEV/g' \
-e 's/\/SB_NOEXEC/g' \
-e 's/\/SB_SYNCHRONOUS/g' \
-e 's/\/SB_MANDLOCK/g' \
-e 's/\/SB_DIRSYNC/g' \
-e 's/\/SB_NOATIME/g' \
-e 's/\/SB_NODIRATIME/g' \
-e 's/\/SB_SILENT/g' \
-e 's/\/SB_POSIXACL/g' \
-e 's/\/SB_KERNMOUNT/g' \
-e 's/\/SB_I_VERSION/g' \
-e 's/\/SB_LAZYTIME/g' \
$listand commit it with something along the lines of 'convert filesystems
away from use of MS_... constants' as commit message, it would save a
quite a bit of headache next cycle"* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Differentiate mount flags (MS_*) from internal superblock flags
VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
24 Aug, 2017
2 commits
-
The local variable "bh" will be set to an appropriate pointer a bit later.
Thus omit the explicit initialisation at the beginning.Signed-off-by: Markus Elfring
Signed-off-by: Jan Kara -
The script “checkpatch.pl” pointed information out like the following.
Comparison to NULL could be written !...
Thus fix the affected source code places.
Signed-off-by: Markus Elfring
Signed-off-by: Jan Kara
21 Aug, 2017
1 commit
-
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring
Signed-off-by: Jan Kara
18 Jul, 2017
1 commit
-
According to ECMA-130 standard maximum valid track number is 99. Since
'session' mount option starts indexing at 0 (and we add 1 to the passed
number), we should refuse value 99. Also the condition in
isofs_get_last_session() unnecessarily repeats the check - remove it.Reported-by: David Howells
Signed-off-by: Jan Kara
17 Jul, 2017
1 commit
-
Firstly by applying the following with coccinelle's spatch:
@@ expression SB; @@
-SB->s_flags & MS_RDONLY
+sb_rdonly(SB)to effect the conversion to sb_rdonly(sb), then by applying:
@@ expression A, SB; @@
(
-(!sb_rdonly(SB)) && A
+!sb_rdonly(SB) && A
|
-A != (sb_rdonly(SB))
+A != sb_rdonly(SB)
|
-A == (sb_rdonly(SB))
+A == sb_rdonly(SB)
|
-!(sb_rdonly(SB))
+!sb_rdonly(SB)
|
-A && (sb_rdonly(SB))
+A && sb_rdonly(SB)
|
-A || (sb_rdonly(SB))
+A || sb_rdonly(SB)
|
-(sb_rdonly(SB)) != A
+sb_rdonly(SB) != A
|
-(sb_rdonly(SB)) == A
+sb_rdonly(SB) == A
|
-(sb_rdonly(SB)) && A
+sb_rdonly(SB) && A
|
-(sb_rdonly(SB)) || A
+sb_rdonly(SB) || A
)@@ expression A, B, SB; @@
(
-(sb_rdonly(SB)) ? 1 : 0
+sb_rdonly(SB)
|
-(sb_rdonly(SB)) ? A : B
+sb_rdonly(SB) ? A : B
)to remove left over excess bracketage and finally by applying:
@@ expression A, SB; @@
(
-(A & MS_RDONLY) != sb_rdonly(SB)
+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
|
-(A & MS_RDONLY) == sb_rdonly(SB)
+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
)to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.Signed-off-by: David Howells
14 Jul, 2017
1 commit
-
The isofs patch needs a small fix to handle a signed/unsigned comparison that
the compiler didn't flag - thanks to Dan for catching it.It should be noted, however, the session number handing appears to be incorrect
between where it is parsed and where it is used.Signed-off-by: David Howells
Signed-off-by: Al Viro
11 Jul, 2017
1 commit
-
Implement the show_options superblock op for omfs as part of a bid to get
rid of s_options and generic_show_options() to make it easier to implement
a context-based mount where the mount options can be passed individually
over a file descriptor.Signed-off-by: David Howells
cc: Jan Kara
Signed-off-by: Al Viro
02 Mar, 2017
1 commit
-
Add #include dependencies to all .c files rely on sched.h
doing that for them.Note that even if the count where we need to add extra headers seems high,
it's still a net win, because is included in over
2,200 files ...Acked-by: Linus Torvalds
Cc: Mike Galbraith
Cc: Peter Zijlstra
Cc: Thomas Gleixner
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar
14 Dec, 2016
1 commit
-
Pull block layer updates from Jens Axboe:
"This is the main block pull request this series. Contrary to previous
release, I've kept the core and driver changes in the same branch. We
always ended up having dependencies between the two for obvious
reasons, so makes more sense to keep them together. That said, I'll
probably try and keep more topical branches going forward, especially
for cycles that end up being as busy as this one.The major parts of this pull request is:
- Improved support for O_DIRECT on block devices, with a small
private implementation instead of using the pig that is
fs/direct-io.c. From Christoph.- Request completion tracking in a scalable fashion. This is utilized
by two components in this pull, the new hybrid polling and the
writeback queue throttling code.- Improved support for polling with O_DIRECT, adding a hybrid mode
that combines pure polling with an initial sleep. From me.- Support for automatic throttling of writeback queues on the block
side. This uses feedback from the device completion latencies to
scale the queue on the block side up or down. From me.- Support from SMR drives in the block layer and for SD. From Hannes
and Shaun.- Multi-connection support for nbd. From Josef.
- Cleanup of request and bio flags, so we have a clear split between
which are bio (or rq) private, and which ones are shared. From
Christoph.- A set of patches from Bart, that improve how we handle queue
stopping and starting in blk-mq.- Support for WRITE_ZEROES from Chaitanya.
- Lightnvm updates from Javier/Matias.
- Supoort for FC for the nvme-over-fabrics code. From James Smart.
- A bunch of fixes from a whole slew of people, too many to name
here"* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
blk-stat: fix a few cases of missing batch flushing
blk-flush: run the queue when inserting blk-mq flush
elevator: make the rqhash helpers exported
blk-mq: abstract out blk_mq_dispatch_rq_list() helper
blk-mq: add blk_mq_start_stopped_hw_queue()
block: improve handling of the magic discard payload
blk-wbt: don't throttle discard or write zeroes
nbd: use dev_err_ratelimited in io path
nbd: reset the setup task for NBD_CLEAR_SOCK
nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
nvme-fabrics: Add target support for FC transport
nvme-fabrics: Add host support for FC transport
nvme-fabrics: Add FC transport LLDD api definitions
nvme-fabrics: Add FC transport FC-NVME definitions
nvme-fabrics: Add FC transport error codes to nvme.h
Add type 0x28 NVME type code to scsi fc headers
nvme-fabrics: patch target code in prep for FC transport support
nvme-fabrics: set sqe.command_id in core not transports
parser: add u64 number parser
nvme-rdma: align to generic ib_event logging helper
...
01 Dec, 2016
1 commit
-
The ER records are printed without explicit log level presuming line
continuation until "\n". After the commit 4bcc595ccd8 (printk:
reinstate KERN_CONT for printing continuation lines), the ER records are
printed a character per line.Adding KERN_CONT to appropriate printk statements restores the printout
behavior.Signed-off-by: Mike Rapoport
Signed-off-by: Linus Torvalds
01 Nov, 2016
1 commit
-
Nothing in fs.h should require blk_types.h to be included.
Signed-off-by: Christoph Hellwig
Signed-off-by: Jens Axboe
18 Oct, 2016
1 commit
-
When isofs_mount() is called to mount a device read-write, it returns
EACCES even before it checks that the device actually contains an isofs
filesystem. This may confuse mount(8) which then tries to mount all
subsequent filesystem types in read-only mode.Fix the problem by returning EACCES only once we verify that the device
indeed contains an iso9660 filesystem.CC: stable@vger.kernel.org
Fixes: 17b7f7cf58926844e1dd40f5eb5348d481deca6a
Reported-by: Kent Overstreet
Reported-by: Karel Zak
Signed-off-by: Jan Kara
01 Aug, 2016
1 commit
-
Signed-off-by: Al Viro
29 Jul, 2016
2 commits
-
Pull vfs updates from Al Viro:
"Assorted cleanups and fixes.Probably the most interesting part long-term is ->d_init() - that will
have a bunch of followups in (at least) ceph and lustre, but we'll
need to sort the barrier-related rules before it can get used for
really non-trivial stuff.Another fun thing is the merge of ->d_iput() callers (dentry_iput()
and dentry_unlink_inode()) and a bunch of ->d_compare() ones (all
except the one in __d_lookup_lru())"* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
fs/dcache.c: avoid soft-lockup in dput()
vfs: new d_init method
vfs: Update lookup_dcache() comment
bdev: get rid of ->bd_inodes
Remove last traces of ->sync_page
new helper: d_same_name()
dentry_cmp(): use lockless_dereference() instead of smp_read_barrier_depends()
vfs: clean up documentation
vfs: document ->d_real()
vfs: merge .d_select_inode() into .d_real()
unify dentry_iput() and dentry_unlink_inode()
binfmt_misc: ->s_root is not going anywhere
drop redundant ->owner initializations
ufs: get rid of redundant checks
orangefs: constify inode_operations
missed comment updates from ->direct_IO() prototype change
file_inode(f)->i_mapping is f->f_mapping
trim fsnotify hooks a bit
9p: new helper - v9fs_parent_fid()
debugfs: ->d_parent is never NULL or negative
... -
This changes the vfs dentry hashing to mix in the parent pointer at the
_beginning_ of the hash, rather than at the end.That actually improves both the hash and the code generation, because we
can move more of the computation to the "static" part of the dcache
setup, and do less at lookup runtime.It turns out that a lot of other hash users also really wanted to mix in
a base pointer as a 'salt' for the hash, and so the slightly extended
interface ends up working well for other cases too.Users that want a string hash that is purely about the string pass in a
'salt' pointer of NULL.* merge branch 'salted-string-hash':
fs/dcache.c: Save one 32-bit multiply in dcache lookup
vfs: make the string hashes salt the hash
01 Jul, 2016
1 commit
-
Commit 7eaceaccab5f removed ->sync_page, but a few mentions of it still
existed in documentation and comments,Signed-off-by: Matthew Wilcox
Signed-off-by: Al Viro
11 Jun, 2016
1 commit
-
We always mixed in the parent pointer into the dentry name hash, but we
did it late at lookup time. It turns out that we can simplify that
lookup-time action by salting the hash with the parent pointer early
instead of late.A few other users of our string hashes also wanted to mix in their own
pointers into the hash, and those are updated to use the same mechanism.Hash users that don't have any particular initial salt can just use the
NULL pointer as a no-salt.Cc: Vegard Nossum
Cc: George Spelvin
Cc: Al Viro
Signed-off-by: Linus Torvalds
08 Jun, 2016
1 commit
-
This has ll_rw_block users pass in the operation and flags separately,
so ll_rw_block can setup the bio op and bi_rw flags on the bio that
is submitted.Signed-off-by: Mike Christie
Reviewed-by: Christoph Hellwig
Reviewed-by: Hannes Reinecke
Signed-off-by: Jens Axboe
10 May, 2016
1 commit
-
Signed-off-by: Al Viro
09 May, 2016
2 commits
-
Lots of Idiotic Silly Parentheses is -> that way... What that
condition checks is that there's exactly 32 bytes between the
end of name and the end of entire drectory record.Signed-off-by: Al Viro
08 May, 2016
1 commit
-
Payloads of NM entries are not supposed to contain NUL. When we run
into such, only the part prior to the first NUL goes into the
concatenation (i.e. the directory entry name being encoded by a bunch
of NM entries). We do stop when the amount collected so far + the
claimed amount in the current NM entry exceed 254. So far, so good,
but what we return as the total length is the sum of *claimed*
sizes, not the actual amount collected. And that can grow pretty
large - not unlimited, since you'd need to put CE entries in
between to be able to get more than the maximum that could be
contained in one isofs directory entry / continuation chunk and
we are stop once we'd encountered 32 CEs, but you can get about 8Kb
easily. And that's what will be passed to readdir callback as the
name length. 8Kb __copy_to_user() from a buffer allocated by
__get_free_page()Cc: stable@vger.kernel.org # 0.98pl6+ (yes, really)
Signed-off-by: Al Viro