Eric Lee / smarc-fsl-linux-kernel

31 May, 2019

1 commit

  • 2874c5fd2   treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 ... Browse Code »

    Based on 1 normalized pattern(s):

    this program is free software you can redistribute it and or modify
    it under the terms of the gnu general public license as published by
    the free software foundation either version 2 of the license or at
    your option any later version

    extracted by the scancode license scanner the SPDX license identifier

    GPL-2.0-or-later

    has been chosen to replace the boilerplate/reference in 3029 file(s).

    Signed-off-by: Thomas Gleixner
    Reviewed-by: Allison Randal
    Cc: linux-spdx@vger.kernel.org
    Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
    Signed-off-by: Greg Kroah-Hartman

    Thomas Gleixner
     

16 Jun, 2017

1 commit

  • d58ff3512   networking: make skb_push & __skb_push return void pointers ... Browse Code »

    It seems like a historic accident that these return unsigned char *,
    and in many places that means casts are required, more often than not.

    Make these functions return void * and remove all the casts across
    the tree, adding a (u8 *) cast only where the unsigned char pointer
    was used directly, all done with the following spatch:

    @@
    expression SKB, LEN;
    typedef u8;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    @@
    - *(fn(SKB, LEN))
    + *(u8 *)fn(SKB, LEN)

    @@
    expression E, SKB, LEN;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    type T;
    @@
    - E = ((T *)(fn(SKB, LEN)))
    + E = fn(SKB, LEN)

    @@
    expression SKB, LEN;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    @@
    - fn(SKB, LEN)[0]
    + *(u8 *)fn(SKB, LEN)

    Note that the last part there converts from push(...)[0] to the
    more idiomatic *(u8 *)push(...).

    Signed-off-by: Johannes Berg
    Signed-off-by: David S. Miller

    Johannes Berg
     

21 Oct, 2016

1 commit

  • b3e3893e1   net: use core MTU range checking in misc drivers ... Browse Code »

    firewire-net:
    - set min/max_mtu
    - remove fwnet_change_mtu

    nes:
    - set max_mtu
    - clean up nes_netdev_change_mtu

    xpnet:
    - set min/max_mtu
    - remove xpnet_dev_change_mtu

    hippi:
    - set min/max_mtu
    - remove hippi_change_mtu

    batman-adv:
    - set max_mtu
    - remove batadv_interface_change_mtu
    - initialization is a little async, not 100% certain that max_mtu is set
    in the optimal place, don't have hardware to test with

    rionet:
    - set min/max_mtu
    - remove rionet_change_mtu

    slip:
    - set min/max_mtu
    - streamline sl_change_mtu

    um/net_kern:
    - remove pointless ndo_change_mtu

    hsi/clients/ssi_protocol:
    - use core MTU range checking
    - remove now redundant ssip_pn_set_mtu

    ipoib:
    - set a default max MTU value
    - Note: ipoib's actual max MTU can vary, depending on if the device is in
    connected mode or not, so we'll just set the max_mtu value to the max
    possible, and let the ndo_change_mtu function continue to validate any new
    MTU change requests with checks for CM or not. Note that ipoib has no
    min_mtu set, and thus, the network core's mtu > 0 check is the only lower
    bounds here.

    mptlan:
    - use net core MTU range checking
    - remove now redundant mpt_lan_change_mtu

    fddi:
    - min_mtu = 21, max_mtu = 4470
    - remove now redundant fddi_change_mtu (including export)

    fjes:
    - min_mtu = 8192, max_mtu = 65536
    - The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to
    get past the core net MTU range checks so fjes_change_mtu can validate a
    new MTU against what it supports (see fjes_support_mtu in fjes_hw.c)

    hsr:
    - min_mtu = 0 (calls ether_setup, max_mtu is 1500)

    f_phonet:
    - min_mtu = 6, max_mtu = 65541

    u_ether:
    - min_mtu = 14, max_mtu = 15412

    phonet/pep-gprs:
    - min_mtu = 576, max_mtu = 65530
    - remove redundant gprs_set_mtu

    CC: netdev@vger.kernel.org
    CC: linux-rdma@vger.kernel.org
    CC: Stefan Richter
    CC: Faisal Latif
    CC: linux-rdma@vger.kernel.org
    CC: Cliff Whickman
    CC: Robin Holt
    CC: Jes Sorensen
    CC: Marek Lindner
    CC: Simon Wunderlich
    CC: Antonio Quartulli
    CC: Sathya Prakash
    CC: Chaitra P B
    CC: Suganath Prabu Subramani
    CC: MPT-FusionLinux.pdl@broadcom.com
    CC: Sebastian Reichel
    CC: Felipe Balbi
    CC: Arvid Brodin
    CC: Remi Denis-Courmont
    Signed-off-by: Jarod Wilson
    Signed-off-by: David S. Miller

    Jarod Wilson
     

03 Mar, 2015

1 commit

16 Jul, 2014

1 commit

  • c835a6773   net: set name_assign_type in alloc_netdev() ... Browse Code »

    Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert
    all users to pass NET_NAME_UNKNOWN.

    Coccinelle patch:

    @@
    expression sizeof_priv, name, setup, txqs, rxqs, count;
    @@

    (
    -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs)
    +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs)
    |
    -alloc_netdev_mq(sizeof_priv, name, setup, count)
    +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count)
    |
    -alloc_netdev(sizeof_priv, name, setup)
    +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup)
    )

    v9: move comments here from the wrong commit

    Signed-off-by: Tom Gundersen
    Reviewed-by: David Herrmann
    Signed-off-by: David S. Miller

    Tom Gundersen
     

16 Apr, 2012

1 commit

29 Mar, 2012

1 commit

24 Sep, 2010

1 commit

25 May, 2009

1 commit

07 Apr, 2009

1 commit

21 Nov, 2008

1 commit

11 Oct, 2007

1 commit

26 Apr, 2007

3 commits

15 Feb, 2007

1 commit

  • cd354f1ae   [PATCH] remove many unneeded #includes of sched.h ... Browse Code »

    After Al Viro (finally) succeeded in removing the sched.h #include in module.h
    recently, it makes sense again to remove other superfluous sched.h includes.
    There are quite a lot of files which include it but don't actually need
    anything defined in there. Presumably these includes were once needed for
    macros that used to live in sched.h, but moved to other header files in the
    course of cleaning it up.

    To ease the pain, this time I did not fiddle with any header files and only
    removed #includes from .c-files, which tend to cause less trouble.

    Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
    arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
    allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
    configs in arch/arm/configs on arm. I also checked that no new warnings were
    introduced by the patch (actually, some warnings are removed that were emitted
    by unnecessarily included header files).

    Signed-off-by: Tim Schmielau
    Acked-by: Russell King
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Tim Schmielau
     

11 Feb, 2007

1 commit

01 Jul, 2006

1 commit

30 Aug, 2005

1 commit

13 Jul, 2005

1 commit

06 May, 2005

1 commit

17 Apr, 2005

1 commit

  • 1da177e4c   Linux-2.6.12-rc2 ... Browse Code »

    Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds