13 Jul, 2005
40 commits
-
Handle writes to a snapshot-origin device that has been extended since the
snapshot was taken.Signed-off-by: Alasdair G Kergon
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Fix dm_swap_table() __bind error cases: a missing unlock, and EINVAL
preferable to EPERM.Signed-off-by: Alasdair G Kergon
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Prevent more than one priority group initialisation function from being
outstanding at once. Otherwise the completion functions interfere with each
other. Also, reloading the table could reference a freed pointer.Only reset queue_io in pg_init_complete if another pg_init isn't required.
Skip process_queued_ios if the queue is empty so that we only trigger a
pg_init if there's I/O.Signed-off-by: Lars Marowsky-Bree
Signed-off-by: Alasdair G Kergon
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
To avoid deadlock when suspending a multipath device after all its paths have
failed, stop queueing any I/O that is about to fail *before* calling
freeze_bdev instead of after.Instead of setting a multipath 'suspended' flag which would have to be reset
if an error occurs during the process, save the previous queueing state and
leave userspace to restore if it wishes.Signed-off-by: Alasdair G Kergon
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The multipath destructor must flush its workqueue. Otherwise items that
reference the destroyed object could remain.From: "goggin, edward"
Signed-off-by: Lars Marowsky-Bree
Signed-off-by: Alasdair G Kergon
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
dm multipath will report barriers as not supported with this patch.
Signed-off-by: Lars Marowsky-Bree
Signed-off-by: Alasdair G Kergon
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Always include dvb frontend code for hybrid cx88 and saa7134 boards.
Signed-off-by: Michael Krufky
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- Eliminated unused code.
Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- obsolete TUNER_SET_TVFREQ changed to VIDIOCSFREQ.
Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- Corrected all cards marked as 7135 cards to 7133.
- Add new card support for Compro VideoMate TV Gold+II.
- Add new card support for Kworld Xpert TV PVR7134
- Add new card support for Typhoon DVB-T Cardbus.
- Changes to comply with CodingStyle: // comments converted to /* */
- Remove irq2_mask field from saa7134_dev structure.
- Collect all the bits needed in saa7134_hwinit2() instead.
- Distinguish the different variants of the Medion MD7134 modules via eeprom
- moved Philips FMD1216 radio specific setup to saa7134-core.c
- Fix kernel compile error with CONFIG_MODULES=n
- Cleanup tuner private calls.
- Some Indent fixes.Signed-off-by: Michael Tokarev
Signed-off-by: Michael Krufky
Signed-off-by: Hannibal
Signed-off-by: Elshin Roman
Signed-off-by: Hermann Pitton
Signed-off-by: Juergen Orschiedt
Signed-off-by: Hartmut Hackmann
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- driver command adapted to use new control (TUNER_SET_TYPE_ADDR,
instead of TUNER_SET_TYPE)Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- Removed obsolete option. Current code needs multi tuner.
Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- Fixed a trouble on tuner-core that generates erros on computers with more
than one TV card.
- Rename tuner structures fields.
- Tail spaces removed.
- I2C cleanups and converged to a basic reference structure.
- Removed unused structures.
- Fix setting frequency on tda8290.
- Added code for TEA5767 autodetection.
- Standby mode support implemented. It is used to disable
a non used tuner. Currenlty implemented on tea5767.
- New macro: set_type disables other tuner when changing mode.
- Some cleanups.
- Use 50 kHz step when tunning radio for most tuners to improve precision.Signed-off-by: Fabien Perrot
Signed-off-by: Michael Krufky
Signed-off-By: Nickolay V. Shmyrev
Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- Removed unused structures.
- CodingStyle rules applied to comments.Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- Removed unused structures.
- CodingStyle rules applied to comments.Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- Removed unused structures.
Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- Add new Typhoon DVB-T Cardbus.
- DVB-T support for MD7134 cardbus and the PCI variants
- initial DVB-T support for Lifeview Flydvb-t duo
- DVB-T support for Philips TOUGH reference design
- Don't turn off the xtal output of tda8274/75 in sleep mode
- Let Kconfig decide whether to include frontend-specific code in saa7134-dvb.
- Removed unused structures.Signed-off-by: Juergen Orschiedt
Signed-off-by: Michael Krufky
Signed-off-by: Hartmut Hackmann
Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- Removed unused structures.
- Removed BTTV version check.
- Some debug structs moved to their own .c file and converted to static
- Comment changed to express better when attach_inform is running
- set_freq removed from set_mode at tuner-core.c.
- I2C cleanups and converged to a basic reference structure.
- Rename tuner structures fields.
- It calls VIDIOC_G_FREQUENCY to get tuner freq from tuner.
- added missing contrast offset value, set to 0.
- Let Kconfig decide whether to include frontend-specific code.Signed-Off-By: Nickolay V. Shmyrev
Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- use DMA_32BIT_MASK.
- Rename tuner structures fields.
- Tail spaces removed.
- I2C cleanups and converged to a basic reference structure.
- Removed unused structures.
- Removed BTTV version check.Signed-off-by:
Signed-off-by: Michael Krufky
Signed-Off-By: Nickolay V. Shmyrev
Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Changes to comply with CodingStyle: // comments converted to /* */
Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- stop log spamming when running femon (printk -> dprintk)
Signed-off-by: Johannes Stezenbach
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The / in the driver name (budget dvb /w video in) is not a valid character for
device names - removed it, now it works!Same for ttusb-budget.
Signed-off-by: Patrick Boettcher
Signed-off-by: Julian Scheel
Signed-off-by: Johannes Stezenbach
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
corrected some typos.
Signed-off-by: Patrick Boettcher
Signed-off-by: Johannes Stezenbach
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- Initialize all non mutually exclusive variables
without regard to the mode selected.
- Do a software reset each time the parameters are
set, regardless of whether anything changes.
This may allow an application to recover from a
hung condition.
- Improved error reporting.
- Removed $Id:$Signed-off-by: Mac Michaels
Signed-off-by: Michael Krufky
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch adds PCI IRQ initialization to TB0219 driver.
Signed-off-by: Yoichi Yuasa
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This patch contains the following fixes:
- IBM_ASM must depend on PCI
- remove useless "default n"
- correct the URL to further informationSigned-off-by: Adrian Bunk
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The current CardBus window allocation code in yenta_socket is unable to handle
the transparent PCI-bridge handling update in 2.6.13. We need to check _all_
resources of a given type to find the best one suitable for CardBus windows,
not just the first one.Signed-off-by: Dominik Brodowski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
drivers/pci/setup-bus.c enumerates the CardBus windows (bus->resources[])
Signed-off-by: Dominik Brodowski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
If the CardBus windows were pre-configured and the CardBus bridge is behind a
transparent PCI-PCI bridge, pci_find_parent_resource() might return a
different resource than the real parent if it is called before the window is
determined. Therefore, move that call around.Also fix return of value in void function.
Signed-off-by: Dominik Brodowski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This shuts up a potential uninitialized variable warning.
Signed-off-by: Matt Mackall
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Signed-off-by: Dave Jones
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Signed-off-by: Len Brown
-
tr_type_trans(), hippi_type_trans() left as-is.
Signed-off-by: Alexey Dobriyan
Signed-off-by: David S. Miller -
The following driver provides complete interrupt-in and interrupt-out
reports (raw data) to a user program. Until now it uses the
HIDIOCGDEVINFO ioctl call, because I don't know better :-(. Perhaps, it
will be ok for you - and I will be happy, if you assign 8 minor numbers.I have tested it in several environments and it works very well for me.
However, it has a problem with two or more devices at the same hub, if
the two or more devices need 1 ms interrupt-in transfers. Unfortunately
more than one interrupt-in transfer every ms isn't possible (ehci
driver?). This is why the min_interrupt_in_interval and
min_interrupt_out_interval are increased to 2 ms (see the corresponding
module parameters). This way, I can use two devices simultaneously at
the same hub.Signed-off-by: Michael Hund
Signed-off-by: Greg Kroah-Hartman -
This increases the reference count on the usb cdc acm control interface
which is referred to by the tty interface provided by the driver. This
allows the deferred removal of the tty after the physical device is
disconnected if the tty is held open at the time of disconnection.Signed-off-by: brian@murphy.dk
Signed-off-by: Greg Kroah-Hartman -
Export usb_get_intf and usb_put_intf so that modules can increase
usb interface reference counts.Signed-off-by: brian@murphy.dk
Signed-off-by: Greg Kroah-Hartman -
A patch re-organizing some parts of root hub initialization deleted the
code initializing the bus-neutral reboot/shutdown notifier for OHCI.
This patch just restores that deleted code.Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman
