Eric Lee / smarc-fsl-linux-kernel

31 May, 2019

1 commit

  • 9952f6918   treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201 ... Browse Code »

    Based on 1 normalized pattern(s):

    this program is free software you can redistribute it and or modify
    it under the terms and conditions of the gnu general public license
    version 2 as published by the free software foundation this program
    is distributed in the hope it will be useful but without any
    warranty without even the implied warranty of merchantability or
    fitness for a particular purpose see the gnu general public license
    for more details you should have received a copy of the gnu general
    public license along with this program if not see http www gnu org
    licenses

    extracted by the scancode license scanner the SPDX license identifier

    GPL-2.0-only

    has been chosen to replace the boilerplate/reference in 228 file(s).

    Signed-off-by: Thomas Gleixner
    Reviewed-by: Allison Randal
    Reviewed-by: Steve Winslow
    Reviewed-by: Richard Fontana
    Reviewed-by: Alexios Zavras
    Cc: linux-spdx@vger.kernel.org
    Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de
    Signed-off-by: Greg Kroah-Hartman

    Thomas Gleixner
     

01 Feb, 2019

1 commit

  • cbd230978   mfd: rc5t583: Make it explicitly non-modular ... Browse Code »

    The Kconfig currently controlling compilation of this code is:

    drivers/mfd/Kconfig:config MFD_RC5T583
    drivers/mfd/Kconfig: bool "Ricoh RC5T583 Power Management system device"

    ...meaning that it currently is not being built as a module by anyone.

    Lets remove the modular code that is essentially orphaned, so that
    when reading the driver there is no doubt it is builtin-only.

    Since module_init was not in use by this code, the init ordering
    remains unchanged with this commit.

    Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

    We also delete the MODULE_LICENSE tag etc. since all that information
    is already contained at the top of the file in the comments.

    Signed-off-by: Paul Gortmaker
    Acked-by: Linus Walleij
    Acked-by: Laxman Dewangan
    Signed-off-by: Lee Jones

    Paul Gortmaker
     

16 May, 2018

2 commits

09 May, 2016

1 commit

16 Mar, 2016

1 commit

  • a862dc3ea   mfd: rc5t583: Set regmap config reg counts properly ... Browse Code »

    Regmap config max_register field should contain number of
    device last register, however num_reg_defaults_raw field
    should be set to register count instead
    (usually one register more than max_register).

    rc5t583 driver had both of these fields set to the same value,
    fix this by introducing separate defines for max register
    number and total count of registers.

    Signed-off-by: Maciej S. Szmigiero
    Signed-off-by: Lee Jones

    Maciej S. Szmigiero
     

11 Aug, 2015

1 commit

06 Jan, 2014

1 commit

  • 5ac98553a   mfd: Constify struct mfd_cell where possible ... Browse Code »

    As of commit 03e361b25ee8dfb1fd9b890072c23c4aae01c6c7 ("mfd: Stop setting
    refcounting pointers in original mfd_cell arrays"), the "cell" parameter of
    mfd_add_devices() is "const" again. Hence make all cell data passed to
    mfd_add_devices() const where possible.

    Signed-off-by: Geert Uytterhoeven
    Signed-off-by: Lee Jones

    Geert Uytterhoeven
     

31 Jul, 2013

1 commit

29 Nov, 2012

3 commits

  • 4740f73fe   mfd: remove use of __devexit ... Browse Code »

    CONFIG_HOTPLUG is going away as an option so __devexit is no
    longer needed.

    Signed-off-by: Bill Pemberton
    Cc: Srinidhi Kasagar
    Cc: Peter Tyser
    Cc: Daniel Walker
    Cc: Bryan Huntsman
    Acked-by: David Brown
    Acked-by: Linus Walleij
    Acked-by: Mark Brown
    Signed-off-by: Greg Kroah-Hartman

    Bill Pemberton
     
  • f791be492   mfd: remove use of __devinit ... Browse Code »

    CONFIG_HOTPLUG is going away as an option so __devinit is no longer
    needed.

    Signed-off-by: Bill Pemberton
    Cc: Srinidhi Kasagar
    Cc: Peter Tyser
    Cc: Daniel Walker
    Cc: Bryan Huntsman
    Acked-by: David Brown
    Acked-by: Mark Brown
    Signed-off-by: Greg Kroah-Hartman

    Bill Pemberton
     
  • 84449216b   mfd: remove use of __devexit_p ... Browse Code »

    CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
    needed.

    Signed-off-by: Bill Pemberton
    Cc: Srinidhi Kasagar
    Cc: Peter Tyser
    Cc: Daniel Walker
    Cc: Bryan Huntsman
    Acked-by: David Brown
    Acked-by: Linus Walleij
    Acked-by: Mark Brown
    Signed-off-by: Greg Kroah-Hartman

    Bill Pemberton
     

05 Oct, 2012

1 commit

  • 578f1ef91   Merge tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 ... Browse Code »

    Pull MFD changes from Samuel Ortiz:
    "MFD bits for the 3.7 merge window.

    As usual we have a few new drivers:

    - TI LP8788
    - TI OMAP USB TLL
    - Maxim MAX8907
    - SMSC ECE1099
    - Dialog Semiconductor DA9055
    - A simpler syscon driver that allow us to get rid of the anatop one.

    Drivers are also gradually getting Device Tree and IRQ domain support.

    The following drivers got DT support:
    - palmas, 88pm860x, tc3589x and twl4030-audio

    And those ones now use the IRQ domain APIs:
    - 88pm860x, tc3589x, db8500_prcmu

    Also some other interesting changes:
    - Intel's ICH LPC now supports Lynx Point
    - TI's twl4030-audio added a GPO child
    - tps6527 enabled its backlight subdevice
    - The twl6030 pwm driver moved to the new PWM subsystem

    And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x,
    palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family."

    Fix up various annoying conflicts: the DT and IRQ domain support came in
    twice and was already in 3.6. And then it was apparently rebased.

    Guys, DON'T REBASE!

    * tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits)
    ARM: dts: Enable 88pm860x pmic
    mfd: 88pm860x: Move gpadc init into touch
    mfd: 88pm860x: Device tree support
    mfd: 88pm860x: Use irqdomain
    mfd: smsc: Add support for smsc gpio io/keypad driver
    backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe
    mfd: DA9055 core driver
    mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list
    mfd: wm5110: Add register patches for revision B
    mfd: wm5110: Disable control interface error report for WM5110 rev B
    mfd: max8907: Remove regulator-compatible from DT docs
    backlight: Add TPS65217 WLED driver
    mfd: Add backlight as subdevice to the tps65217
    mfd: Provide the PRCMU with its own IRQ domain
    mfd: Fix max8907 sparse warning
    mfd: Add lp8788 mfd driver
    mfd: dbx500: Provide a more accurate smp_twd clock
    mfd: rc5t583: Fix warning messages
    regulator: palmas: Add DT support
    mfd: palmas: Change regulator defns to better suite DT
    ...

    Linus Torvalds
     

02 Oct, 2012

1 commit

  • 99dbb1632   Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial ... Browse Code »

    Pull the trivial tree from Jiri Kosina:
    "Tiny usual fixes all over the place"

    * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
    doc: fix old config name of kprobetrace
    fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
    btrfs: fix the commment for the action flags in delayed-ref.h
    btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
    vfs: fix kerneldoc for generic_fh_to_parent()
    treewide: fix comment/printk/variable typos
    ipr: fix small coding style issues
    doc: fix broken utf8 encoding
    nfs: comment fix
    platform/x86: fix asus_laptop.wled_type module parameter
    mfd: printk/comment fixes
    doc: getdelays.c: remember to close() socket on error in create_nl_socket()
    doc: aliasing-test: close fd on write error
    mmc: fix comment typos
    dma: fix comments
    spi: fix comment/printk typos in spi
    Coccinelle: fix typo in memdup_user.cocci
    tmiofb: missing NULL pointer checks
    tools: perf: Fix typo in tools/perf
    tools/testing: fix comment / output typos
    ...

    Linus Torvalds
     

24 Sep, 2012

1 commit

  • 0dd96360e   mfd: rc5t583: Fix warning messages ... Browse Code »

    Two variables named master_int and sleepseq_val, were just
    declared without initialization. Pointers to these variables
    were passed to mfd read function. After that these variables
    were used for some of the logical operations.

    Though logically there is nothing wrong, compiler is complaining
    that the variables may be used uninitialized.

    Hence fixing these warning messages by initializing them.

    Signed-off-by: Venu Byravarasu
    Signed-off-by: Samuel Ortiz

    Venu Byravarasu
     

16 Sep, 2012

1 commit

  • 0848c94fb   mfd: core: Push irqdomain mapping out into devices ... Browse Code »

    Currently the MFD core supports remapping MFD cell interrupts using an
    irqdomain but only if the MFD is being instantiated using device tree
    and only if the device tree bindings use the pattern of registering IPs
    in the device tree with compatible properties. This will be actively
    harmful for drivers which support non-DT platforms and use this pattern
    for their DT bindings as it will mean that the core will silently change
    remapping behaviour and it is also limiting for drivers which don't do
    DT with this particular pattern. There is also a potential fragility if
    there are interrupts not associated with MFD cells and all the cells are
    omitted from the device tree for some reason.

    Instead change the code to take an IRQ domain as an optional argument,
    allowing drivers to take the decision about the parent domain for their
    interrupts. The one current user of this feature is ab8500-core, it has
    the domain lookup pushed out into the driver.

    Signed-off-by: Mark Brown
    Signed-off-by: Samuel Ortiz

    Mark Brown
     

14 Sep, 2012

1 commit

  • 55692af5e   mfd: core: Push irqdomain mapping out into devices ... Browse Code »

    Currently the MFD core supports remapping MFD cell interrupts using an
    irqdomain but only if the MFD is being instantiated using device tree
    and only if the device tree bindings use the pattern of registering IPs
    in the device tree with compatible properties. This will be actively
    harmful for drivers which support non-DT platforms and use this pattern
    for their DT bindings as it will mean that the core will silently change
    remapping behaviour and it is also limiting for drivers which don't do
    DT with this particular pattern. There is also a potential fragility if
    there are interrupts not associated with MFD cells and all the cells are
    omitted from the device tree for some reason.

    Instead change the code to take an IRQ domain as an optional argument,
    allowing drivers to take the decision about the parent domain for their
    interrupts. The one current user of this feature is ab8500-core, it has
    the domain lookup pushed out into the driver.

    Signed-off-by: Mark Brown
    Signed-off-by: Samuel Ortiz

    Mark Brown
     

02 Sep, 2012

1 commit

09 May, 2012

1 commit

01 May, 2012

1 commit

17 Apr, 2012

1 commit

  • 82ea267f7   mfd: Fix modular builds of rc5t583 regulator support ... Browse Code »

    The combination of commit 1b1247dd75aa5cf5fae54a3bec7280046e9c7957

    "mfd: Add support for RICOH PMIC RC5T583"

    and commit 6ffc3270210efa2bea526953a142ffc908f5bd86

    "regulator: Add support for RICOH PMIC RC5T583 regulator"

    are causing the i386 allmodconfig builds to fail with this:

    ERROR: "rc5t583_update" [drivers/regulator/rc5t583-regulator.ko] undefined!
    ERROR: "rc5t583_set_bits" [drivers/regulator/rc5t583-regulator.ko] undefined!
    ERROR: "rc5t583_clear_bits" [drivers/regulator/rc5t583-regulator.ko] undefined!
    ERROR: "rc5t583_read" [drivers/regulator/rc5t583-regulator.ko] undefined!

    and this:

    ERROR: "rc5t583_ext_power_req_config" [drivers/regulator/rc5t583-regulator.ko] undefined!

    For the 1st four, make the simple ops static inline, instead of
    polluting the namespace with trivial exports. For the last one,
    add an EXPORT_SYMBOL.

    Signed-off-by: Paul Gortmaker
    Signed-off-by: Samuel Ortiz

    Paul Gortmaker
     

17 Mar, 2012

1 commit

  • 1b1247dd7   mfd: Add support for RICOH PMIC RC5T583 ... Browse Code »
    43

    Ricoh power management IC RC5T583 contains is multi
    functional device having multiple sub devices inside this.
    This device has multiple dcdc/ldo regulators, gpios, interrupt
    controllers, on-key, RTCs, ADCs.
    This device have 4 DCDCs, 8 LDOs, 8 GPIOs, 6 ADCs, 3 RTCs etc.

    Signed-off-by: Laxman Dewangan
    Signed-off-by: Samuel Ortiz

    Laxman Dewangan