14 Nov, 2008
40 commits
-
Use RCU to access another task's creds and to release a task's own creds.
This means that it will be possible for the credentials of a task to be
replaced without another task (a) requiring a full lock to read them, and (b)
seeing deallocated memory.Signed-off-by: David Howells
Acked-by: James Morris
Acked-by: Serge Hallyn
Signed-off-by: James Morris -
Wrap current->cred and a few other accessors to hide their actual
implementation.Signed-off-by: David Howells
Acked-by: James Morris
Acked-by: Serge Hallyn
Signed-off-by: James Morris -
Detach the credentials from task_struct, duplicating them in copy_process()
and releasing them in __put_task_struct().Signed-off-by: David Howells
Acked-by: James Morris
Acked-by: Serge Hallyn
Signed-off-by: James Morris -
Separate the task security context from task_struct. At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.With comment fixes Signed-off-by: Marc Dionne
Signed-off-by: David Howells
Acked-by: James Morris
Acked-by: Serge Hallyn
Signed-off-by: James Morris -
Constify the kernel_cap_t arguments to the capset LSM hooks.
Signed-off-by: David Howells
Acked-by: Serge Hallyn
Acked-by: James Morris
Signed-off-by: James Morris -
Take away the ability for sys_capset() to affect processes other than current.
This means that current will not need to lock its own credentials when reading
them against interference by other processes.This has effectively been the case for a while anyway, since:
(1) Without LSM enabled, sys_capset() is disallowed.
(2) With file-based capabilities, sys_capset() is neutered.
Signed-off-by: David Howells
Acked-by: Serge Hallyn
Acked-by: Andrew G. Morgan
Acked-by: James Morris
Signed-off-by: James Morris -
Alter the use of the key instantiation and negation functions' link-to-keyring
arguments. Currently this specifies a keyring in the target process to link
the key into, creating the keyring if it doesn't exist. This, however, can be
a problem for copy-on-write credentials as it means that the instantiating
process can alter the credentials of the requesting process.This patch alters the behaviour such that:
(1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific
keyring by ID (ringid >= 0), then that keyring will be used.(2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the
special constants that refer to the requesting process's keyrings
(KEY_SPEC_*_KEYRING, all | Instantiator |------->| Instantiator |
| | | | | |
+-----------+ +--------------+ +--------------+
request_key() request_key()This might be useful, for example, in Kerberos, where the requestor requests a
ticket, and then the ticket instantiator requests the TGT, which someone else
then has to go and fetch. The TGT, however, should be retained in the
keyrings of the requestor, not the first instantiator. To make this explict
an extra special keyring constant is also added.Signed-off-by: David Howells
Reviewed-by: James Morris
Signed-off-by: James Morris -
Disperse the bits of linux/key_ui.h as the reason they were put here (keyfs)
didn't get in.Signed-off-by: David Howells
Reviewed-by: James Morris
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Al Viro
Cc: linux-audit@redhat.com
Cc: containers@lists.linux-foundation.org
Cc: linux-mm@kvack.org
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Andrew G. Morgan
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: netdev@vger.kernel.org
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: netdev@vger.kernel.org
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Trond Myklebust
Cc: J. Bruce Fields
Cc: Neil Brown
Cc: linux-nfs@vger.kernel.org
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Acked-by: Ralf Baechle
Cc: linux-hams@vger.kernel.org
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Acked-by: Ralf Baechle
Cc: linux-hams@vger.kernel.org
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: netdev@vger.kernel.org
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Acked-by: Ralf Baechle
Cc: linux-hams@vger.kernel.org
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Al Viro
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: xfs@oss.sgi.com
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Evgeniy Dushistov
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Acked-by: Jan Kara
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Artem Bityutskiy
Cc: Adrian Hunter
Cc: linux-mtd@lists.infradead.org
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Christoph Hellwig
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Steven French
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: reiserfs-devel@vger.kernel.org
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Bob Copeland
Cc: linux-karma-devel@lists.sourceforge.net
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Acked-by: Mark Fasheh
Cc: Joel Becker
Cc: ocfs2-devel@oss.oracle.com
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: J. Bruce Fields
Cc: Neil Brown
Cc: linux-nfs@vger.kernel.org
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Acked-by: Petr Vandrovec
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Acked-by: Dave Kleikamp
Cc: jfs-discussion@lists.sourceforge.net
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: William Irwin
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Mikulas Patocka
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Roman Zippel
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Roman Zippel
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Steven Whitehouse
Cc: cluster-devel@redhat.com
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Miklos Szeredi
Cc: fuse-devel@lists.sourceforge.net
Signed-off-by: James Morris
