Eric Lee / smarc-fsl-linux-kernel

01 Jun, 2015

1 commit

18 Mar, 2015

1 commit

10 Jan, 2015

1 commit

09 Jan, 2014

2 commits

10 Apr, 2013

1 commit

  • 25e11ec4f   USB: regroup all depends on USB within an if USB block ... Browse Code »

    This patch removes the depends on USB from all config symbols in
    drivers/usb/host/Kconfig and replace that with an if USB / endif block
    as suggested by Alan Stern. Some source ... Kconfig lines have been
    shuffled around to permit a better regroupment of the Kconfig files
    depending on "config USB" item. No functionnal change is introduced.

    Acked-by: Alan Stern
    Signed-off-by: Florian Fainelli
    Signed-off-by: Greg Kroah-Hartman

    Florian Fainelli
     

02 May, 2012

1 commit

19 Nov, 2011

1 commit

  • 65db43054   USB: convert drivers/usb/* to use module_usb_driver() ... Browse Code »

    This converts the drivers in drivers/usb/* to use the
    module_usb_driver() macro which makes the code smaller and a bit
    simpler.

    Added bonus is that it removes some unneeded kernel log messages about
    drivers loading and/or unloading.

    Cc: Simon Arlott
    Cc: Duncan Sands
    Cc: Matthieu CASTET
    Cc: Stanislaw Gruszka
    Cc: Pete Zaitcev
    Cc: Oliver Neukum
    Cc: Juergen Stuber
    Cc: Cesar Miquel
    Cc: Matthew Dharm
    Cc: Matthew Wilcox
    Cc: Sarah Sharp
    Cc: Kuninori Morimoto
    Cc: Felipe Balbi
    Cc: Lucas De Marchi
    Cc: Michael Hund
    Cc: Zack Parsons
    Cc: Melchior FRANZ
    Cc: Tomoki Sekiyama
    Cc: Dan Carpenter
    Signed-off-by: Greg Kroah-Hartman

    Greg Kroah-Hartman
     

27 Jul, 2011

1 commit

  • 60063497a   atomic: use <linux/atomic.h> ... Browse Code »

    This allows us to move duplicated code in
    (atomic_inc_not_zero() for now) to

    Signed-off-by: Arun Sharma
    Reviewed-by: Eric Dumazet
    Cc: Ingo Molnar
    Cc: David Miller
    Cc: Eric Dumazet
    Acked-by: Mike Frysinger
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Arun Sharma
     

31 Mar, 2011

1 commit

17 Nov, 2010

1 commit

  • f281233d3   SCSI host lock push-down ... Browse Code »

    Move the mid-layer's ->queuecommand() invocation from being locked
    with the host lock to being unlocked to facilitate speeding up the
    critical path for drivers who don't need this lock taken anyway.

    The patch below presents a simple SCSI host lock push-down as an
    equivalent transformation. No locking or other behavior should change
    with this patch. All existing bugs and locking orders are preserved.

    Additionally, add one parameter to queuecommand,
    struct Scsi_Host *
    and remove one parameter from queuecommand,
    void (*done)(struct scsi_cmnd *)

    Scsi_Host* is a convenient pointer that most host drivers need anyway,
    and 'done' is redundant to struct scsi_cmnd->scsi_done.

    Minimal code disturbance was attempted with this change. Most drivers
    needed only two one-line modifications for their host lock push-down.

    Signed-off-by: Jeff Garzik
    Acked-by: James Bottomley
    Signed-off-by: Linus Torvalds

    Jeff Garzik
     

25 Oct, 2010

1 commit

  • 229aebb87   Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial ... Browse Code »

    * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
    Update broken web addresses in arch directory.
    Update broken web addresses in the kernel.
    Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
    Revert "Fix typo: configuation => configuration" partially
    ida: document IDA_BITMAP_LONGS calculation
    ext2: fix a typo on comment in ext2/inode.c
    drivers/scsi: Remove unnecessary casts of private_data
    drivers/s390: Remove unnecessary casts of private_data
    net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
    drivers/infiniband: Remove unnecessary casts of private_data
    drivers/gpu/drm: Remove unnecessary casts of private_data
    kernel/pm_qos_params.c: Remove unnecessary casts of private_data
    fs/ecryptfs: Remove unnecessary casts of private_data
    fs/seq_file.c: Remove unnecessary casts of private_data
    arm: uengine.c: remove C99 comments
    arm: scoop.c: remove C99 comments
    Fix typo configue => configure in comments
    Fix typo: configuation => configuration
    Fix typo interrest[ing|ed] => interest[ing|ed]
    Fix various typos of valid in comments
    ...

    Fix up trivial conflicts in:
    drivers/char/ipmi/ipmi_si_intf.c
    drivers/usb/gadget/rndis.c
    net/irda/irnet/irnet_ppp.c

    Linus Torvalds
     

15 Oct, 2010

1 commit

  • 6038f373a   llseek: automatically add .llseek fop ... Browse Code »

    All file_operations should get a .llseek operation so we can make
    nonseekable_open the default for future file operations without a
    .llseek pointer.

    The three cases that we can automatically detect are no_llseek, seq_lseek
    and default_llseek. For cases where we can we can automatically prove that
    the file offset is always ignored, we use noop_llseek, which maintains
    the current behavior of not returning an error from a seek.

    New drivers should normally not use noop_llseek but instead use no_llseek
    and call nonseekable_open at open time. Existing drivers can be converted
    to do the same when the maintainer knows for certain that no user code
    relies on calling seek on the device file.

    The generated code is often incorrectly indented and right now contains
    comments that clarify for each added line why a specific variant was
    chosen. In the version that gets submitted upstream, the comments will
    be gone and I will manually fix the indentation, because there does not
    seem to be a way to do that using coccinelle.

    Some amount of new code is currently sitting in linux-next that should get
    the same modifications, which I will do at the end of the merge window.

    Many thanks to Julia Lawall for helping me learn to write a semantic
    patch that does all this.

    ===== begin semantic patch =====
    // This adds an llseek= method to all file operations,
    // as a preparation for making no_llseek the default.
    //
    // The rules are
    // - use no_llseek explicitly if we do nonseekable_open
    // - use seq_lseek for sequential files
    // - use default_llseek if we know we access f_pos
    // - use noop_llseek if we know we don't access f_pos,
    // but we still want to allow users to call lseek
    //
    @ open1 exists @
    identifier nested_open;
    @@
    nested_open(...)
    {

    }

    @ open exists@
    identifier open_f;
    identifier i, f;
    identifier open1.nested_open;
    @@
    int open_f(struct inode *i, struct file *f)
    {

    }

    @ read disable optional_qualifier exists @
    identifier read_f;
    identifier f, p, s, off;
    type ssize_t, size_t, loff_t;
    expression E;
    identifier func;
    @@
    ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
    {

    }

    @ read_no_fpos disable optional_qualifier exists @
    identifier read_f;
    identifier f, p, s, off;
    type ssize_t, size_t, loff_t;
    @@
    ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
    {
    ... when != off
    }

    @ write @
    identifier write_f;
    identifier f, p, s, off;
    type ssize_t, size_t, loff_t;
    expression E;
    identifier func;
    @@
    ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
    {

    }

    @ write_no_fpos @
    identifier write_f;
    identifier f, p, s, off;
    type ssize_t, size_t, loff_t;
    @@
    ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
    {
    ... when != off
    }

    @ fops0 @
    identifier fops;
    @@
    struct file_operations fops = {
    ...
    };

    @ has_llseek depends on fops0 @
    identifier fops0.fops;
    identifier llseek_f;
    @@
    struct file_operations fops = {
    ...
    .llseek = llseek_f,
    ...
    };

    @ has_read depends on fops0 @
    identifier fops0.fops;
    identifier read_f;
    @@
    struct file_operations fops = {
    ...
    .read = read_f,
    ...
    };

    @ has_write depends on fops0 @
    identifier fops0.fops;
    identifier write_f;
    @@
    struct file_operations fops = {
    ...
    .write = write_f,
    ...
    };

    @ has_open depends on fops0 @
    identifier fops0.fops;
    identifier open_f;
    @@
    struct file_operations fops = {
    ...
    .open = open_f,
    ...
    };

    // use no_llseek if we call nonseekable_open
    ////////////////////////////////////////////
    @ nonseekable1 depends on !has_llseek && has_open @
    identifier fops0.fops;
    identifier nso ~= "nonseekable_open";
    @@
    struct file_operations fops = {
    ... .open = nso, ...
    +.llseek = no_llseek, /* nonseekable */
    };

    @ nonseekable2 depends on !has_llseek @
    identifier fops0.fops;
    identifier open.open_f;
    @@
    struct file_operations fops = {
    ... .open = open_f, ...
    +.llseek = no_llseek, /* open uses nonseekable */
    };

    // use seq_lseek for sequential files
    /////////////////////////////////////
    @ seq depends on !has_llseek @
    identifier fops0.fops;
    identifier sr ~= "seq_read";
    @@
    struct file_operations fops = {
    ... .read = sr, ...
    +.llseek = seq_lseek, /* we have seq_read */
    };

    // use default_llseek if there is a readdir
    ///////////////////////////////////////////
    @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier readdir_e;
    @@
    // any other fop is used that changes pos
    struct file_operations fops = {
    ... .readdir = readdir_e, ...
    +.llseek = default_llseek, /* readdir is present */
    };

    // use default_llseek if at least one of read/write touches f_pos
    /////////////////////////////////////////////////////////////////
    @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier read.read_f;
    @@
    // read fops use offset
    struct file_operations fops = {
    ... .read = read_f, ...
    +.llseek = default_llseek, /* read accesses f_pos */
    };

    @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier write.write_f;
    @@
    // write fops use offset
    struct file_operations fops = {
    ... .write = write_f, ...
    + .llseek = default_llseek, /* write accesses f_pos */
    };

    // Use noop_llseek if neither read nor write accesses f_pos
    ///////////////////////////////////////////////////////////

    @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier read_no_fpos.read_f;
    identifier write_no_fpos.write_f;
    @@
    // write fops use offset
    struct file_operations fops = {
    ...
    .write = write_f,
    .read = read_f,
    ...
    +.llseek = noop_llseek, /* read and write both use no f_pos */
    };

    @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier write_no_fpos.write_f;
    @@
    struct file_operations fops = {
    ... .write = write_f, ...
    +.llseek = noop_llseek, /* write uses no f_pos */
    };

    @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    identifier read_no_fpos.read_f;
    @@
    struct file_operations fops = {
    ... .read = read_f, ...
    +.llseek = noop_llseek, /* read uses no f_pos */
    };

    @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
    identifier fops0.fops;
    @@
    struct file_operations fops = {
    ...
    +.llseek = noop_llseek, /* no read or write fn */
    };
    ===== End semantic patch =====

    Signed-off-by: Arnd Bergmann
    Cc: Julia Lawall
    Cc: Christoph Hellwig

    Arnd Bergmann
     

10 Aug, 2010

1 commit

03 Mar, 2010

3 commits

  • 5a207b431   USB: BKL removal: mdc800 ... Browse Code »

    BKL not needed at all. Removed without replacement.

    Signed-off-by: Oliver Neukum
    Signed-off-by: Greg Kroah-Hartman

    Oliver Neukum
     
  • 86266452f   USB: Push BKL on open down into the drivers ... Browse Code »

    Straightforward push into the drivers to allow
    auditing individual drivers separately

    Signed-off-by: Oliver Neukum
    Acked-by: Mauro Carvalho Chehab
    Cc: Jiri Kosina
    Signed-off-by: Greg Kroah-Hartman

    Oliver Neukum
     
  • 9052127f6   USB image: make USB device id constant ... Browse Code »

    The id_table field of the struct usb_device_id is constant in
    so it is worth to make the initialization data also constant.

    The semantic match that finds this kind of pattern is as follows:
    (http://coccinelle.lip6.fr/)

    //
    @r@
    disable decl_init,const_decl_init;
    identifier I1, I2, x;
    @@
    struct I1 {
    ...
    const struct I2 *x;
    ...
    };
    @s@
    identifier r.I1, y;
    identifier r.x, E;
    @@
    struct I1 y = {
    .x = E,
    };
    @c@
    identifier r.I2;
    identifier s.E;
    @@
    const struct I2 E[] = ... ;
    @depends on !c@
    identifier r.I2;
    identifier s.E;
    @@
    + const
    struct I2 E[] = ...;
    //

    Signed-off-by: Németh Márton
    Cc: Julia Lawall
    Cc: cocci@diku.dk
    Signed-off-by: Greg Kroah-Hartman

    Németh Márton
     

23 Sep, 2009

1 commit

25 Mar, 2009

1 commit

18 Mar, 2009

1 commit

08 Jan, 2009

1 commit

  • 011b15df4   USB: change interface to usb_lock_device_for_reset() ... Browse Code »

    This patch (as1161) changes the interface to
    usb_lock_device_for_reset(). The existing interface is apparently not
    very clear, judging from the fact that several of its callers don't
    use it correctly. The new interface always returns 0 for success and
    it always requires the caller to unlock the device afterward.

    The new routine will not return immediately if it is called while the
    driver's probe method is running. Instead it will wait until the
    probe is over and the device has been unlocked. This shouldn't cause
    any problems; I don't know of any cases where drivers call
    usb_lock_device_for_reset() during probe.

    Signed-off-by: Alan Stern
    Cc: Pete Zaitcev
    Signed-off-by: Greg Kroah-Hartman

    Alan Stern
     

18 Oct, 2008

3 commits

25 Apr, 2008

3 commits

02 Feb, 2008

1 commit

29 Nov, 2007

1 commit

23 Oct, 2007

1 commit

20 Oct, 2007

1 commit

  • 01dd2fbf0   typo fixes ... Browse Code »

    Most of these fixes were already submitted for old kernel versions, and were
    approved, but for some reason they never made it into the releases.

    Because this is a consolidation of a couple old missed patches, it touches both
    Kconfigs and documentation texts.

    Signed-off-by: Matt LaPlante
    Acked-by: Randy Dunlap
    Signed-off-by: Adrian Bunk

    Matt LaPlante
     

13 Oct, 2007

1 commit

20 Jul, 2007

2 commits

09 May, 2007

1 commit

15 Feb, 2007

1 commit

  • cd354f1ae   [PATCH] remove many unneeded #includes of sched.h ... Browse Code »

    After Al Viro (finally) succeeded in removing the sched.h #include in module.h
    recently, it makes sense again to remove other superfluous sched.h includes.
    There are quite a lot of files which include it but don't actually need
    anything defined in there. Presumably these includes were once needed for
    macros that used to live in sched.h, but moved to other header files in the
    course of cleaning it up.

    To ease the pain, this time I did not fiddle with any header files and only
    removed #includes from .c-files, which tend to cause less trouble.

    Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
    arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
    allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
    configs in arch/arm/configs on arm. I also checked that no new warnings were
    introduced by the patch (actually, some warnings are removed that were emitted
    by unnecessarily included header files).

    Signed-off-by: Tim Schmielau
    Acked-by: Russell King
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Tim Schmielau
     

08 Feb, 2007

1 commit

02 Dec, 2006

1 commit

05 Oct, 2006

1 commit

  • 7d12e780e   IRQ: Maintain regs pointer globally rather than passing to IRQ handlers ... Browse Code »

    Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
    of passing regs around manually through all ~1800 interrupt handlers in the
    Linux kernel.

    The regs pointer is used in few places, but it potentially costs both stack
    space and code to pass it around. On the FRV arch, removing the regs parameter
    from all the genirq function results in a 20% speed up of the IRQ exit path
    (ie: from leaving timer_interrupt() to leaving do_IRQ()).

    Where appropriate, an arch may override the generic storage facility and do
    something different with the variable. On FRV, for instance, the address is
    maintained in GR28 at all times inside the kernel as part of general exception
    handling.

    Having looked over the code, it appears that the parameter may be handed down
    through up to twenty or so layers of functions. Consider a USB character
    device attached to a USB hub, attached to a USB controller that posts its
    interrupts through a cascaded auxiliary interrupt controller. A character
    device driver may want to pass regs to the sysrq handler through the input
    layer which adds another few layers of parameter passing.

    I've build this code with allyesconfig for x86_64 and i386. I've runtested the
    main part of the code on FRV and i386, though I can't test most of the drivers.
    I've also done partial conversion for powerpc and MIPS - these at least compile
    with minimal configurations.

    This will affect all archs. Mostly the changes should be relatively easy.
    Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

    struct pt_regs *old_regs = set_irq_regs(regs);

    And put the old one back at the end:

    set_irq_regs(old_regs);

    Don't pass regs through to generic_handle_irq() or __do_IRQ().

    In timer_interrupt(), this sort of change will be necessary:

    - update_process_times(user_mode(regs));
    - profile_tick(CPU_PROFILING, regs);
    + update_process_times(user_mode(get_irq_regs()));
    + profile_tick(CPU_PROFILING);

    I'd like to move update_process_times()'s use of get_irq_regs() into itself,
    except that i386, alone of the archs, uses something other than user_mode().

    Some notes on the interrupt handling in the drivers:

    (*) input_dev() is now gone entirely. The regs pointer is no longer stored in
    the input_dev struct.

    (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
    something different depending on whether it's been supplied with a regs
    pointer or not.

    (*) Various IRQ handler function pointers have been moved to type
    irq_handler_t.

    Signed-Off-By: David Howells
    (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

    David Howells
     

29 Sep, 2006

1 commit