29 Jun, 2006
1 commit
-
Same as with already do with the file operations: keep them in .rodata and
prevents people from doing runtime patching.Signed-off-by: Christoph Hellwig
Cc: Steven French
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
23 Jun, 2006
2 commits
-
Give the statfs superblock operation a dentry pointer rather than a superblock
pointer.This complements the get_sb() patch. That reduced the significance of
sb->s_root, allowing NFS to place a fake root there. However, NFS does
require a dentry to use as a target for the statfs operation. This permits
the root in the vfsmount to be used instead.linux/mount.h has been added where necessary to make allyesconfig build
successfully.Interest has also been expressed for use with the FUSE and XFS filesystems.
Signed-off-by: David Howells
Acked-by: Al Viro
Cc: Nathan Scott
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Extend the get_sb() filesystem operation to take an extra argument that
permits the VFS to pass in the target vfsmount that defines the mountpoint.The filesystem is then required to manually set the superblock and root dentry
pointers. For most filesystems, this should be done with simple_set_mnt()
which will set the superblock pointer and then set the root dentry to the
superblock's s_root (as per the old default behaviour).The get_sb() op now returns an integer as there's now no need to return the
superblock pointer.This patch permits a superblock to be implicitly shared amongst several mount
points, such as can be done with NFS to avoid potential inode aliasing. In
such a case, simple_set_mnt() would not be called, and instead the mnt_root
and mnt_sb would be set directly.The patch also makes the following changes:
(*) the get_sb_*() convenience functions in the core kernel now take a vfsmount
pointer argument and return an integer, so most filesystems have to change
very little.(*) If one of the convenience function is not used, then get_sb() should
normally call simple_set_mnt() to instantiate the vfsmount. This will
always return 0, and so can be tail-called from get_sb().(*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the
dcache upon superblock destruction rather than shrink_dcache_anon().This is required because the superblock may now have multiple trees that
aren't actually bound to s_root, but that still need to be cleaned up. The
currently called functions assume that the whole tree is rooted at s_root,
and that anonymous dentries are not the roots of trees which results in
dentries being left unculled.However, with the way NFS superblock sharing are currently set to be
implemented, these assumptions are violated: the root of the filesystem is
simply a dummy dentry and inode (the real inode for '/' may well be
inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries
with child trees.[*] Anonymous until discovered from another tree.
(*) The documentation has been adjusted, including the additional bit of
changing ext2_* into foo_* in the documentation.[akpm@osdl.org: convert ipath_fs, do other stuff]
Signed-off-by: David Howells
Acked-by: Al Viro
Cc: Nathan Scott
Cc: Roland Dreier
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
29 Mar, 2006
1 commit
-
This is a conversion to make the various file_operations structs in fs/
const. Basically a regexp job, with a few manual fixupsThe goal is both to increase correctness (harder to accidentally write to
shared datastructures) and reducing the false sharing of cachelines with
things that get dirty in .data (while .rodata is nicely read only and thus
cache clean)Signed-off-by: Arjan van de Ven
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
24 Mar, 2006
2 commits
-
Rewrap the overly long source code lines resulting from the previous
patch's addition of the slab cache flag SLAB_MEM_SPREAD. This patch
contains only formatting changes, and no function change.Signed-off-by: Paul Jackson
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD
memory spreading.If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's
in a cpuset with the 'memory_spread_slab' option enabled goes to allocate
from such a slab cache, the allocations are spread evenly over all the
memory nodes (task->mems_allowed) allowed to that task, instead of favoring
allocation on the node local to the current cpu.The following inode and similar caches are marked SLAB_MEM_SPREAD:
file cache
==== =====
fs/adfs/super.c adfs_inode_cache
fs/affs/super.c affs_inode_cache
fs/befs/linuxvfs.c befs_inode_cache
fs/bfs/inode.c bfs_inode_cache
fs/block_dev.c bdev_cache
fs/cifs/cifsfs.c cifs_inode_cache
fs/coda/inode.c coda_inode_cache
fs/dquot.c dquot
fs/efs/super.c efs_inode_cache
fs/ext2/super.c ext2_inode_cache
fs/ext2/xattr.c (fs/mbcache.c) ext2_xattr
fs/ext3/super.c ext3_inode_cache
fs/ext3/xattr.c (fs/mbcache.c) ext3_xattr
fs/fat/cache.c fat_cache
fs/fat/inode.c fat_inode_cache
fs/freevxfs/vxfs_super.c vxfs_inode
fs/hpfs/super.c hpfs_inode_cache
fs/isofs/inode.c isofs_inode_cache
fs/jffs/inode-v23.c jffs_fm
fs/jffs2/super.c jffs2_i
fs/jfs/super.c jfs_ip
fs/minix/inode.c minix_inode_cache
fs/ncpfs/inode.c ncp_inode_cache
fs/nfs/direct.c nfs_direct_cache
fs/nfs/inode.c nfs_inode_cache
fs/ntfs/super.c ntfs_big_inode_cache_name
fs/ntfs/super.c ntfs_inode_cache
fs/ocfs2/dlm/dlmfs.c dlmfs_inode_cache
fs/ocfs2/super.c ocfs2_inode_cache
fs/proc/inode.c proc_inode_cache
fs/qnx4/inode.c qnx4_inode_cache
fs/reiserfs/super.c reiser_inode_cache
fs/romfs/inode.c romfs_inode_cache
fs/smbfs/inode.c smb_inode_cache
fs/sysv/inode.c sysv_inode_cache
fs/udf/super.c udf_inode_cache
fs/ufs/super.c ufs_inode_cache
net/socket.c sock_inode_cache
net/sunrpc/rpc_pipe.c rpc_inode_cacheThe choice of which slab caches to so mark was quite simple. I marked
those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache,
inode_cache, and buffer_head, which were marked in a previous patch. Even
though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same
potentially large file system i/o related slab caches as we need for memory
spreading.Given that the rule now becomes "wherever you would have used a
SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use
the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain.
Future file system writers will just copy one of the existing file system
slab cache setups and tend to get it right without thinking.Signed-off-by: Paul Jackson
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
23 Mar, 2006
1 commit
-
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.Signed-off-by: Ingo Molnar
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
10 Jan, 2006
1 commit
-
This patch converts the inode semaphore to a mutex. I have tested it on
XFS and compiled as much as one can consider on an ia64. Anyway your
luck with it might be different.Modified-by: Ingo Molnar
(finished the conversion)
Signed-off-by: Jes Sorensen
Signed-off-by: Ingo Molnar
09 Nov, 2005
1 commit
-
Remove mtime update in hpfs_file_write, it's done in generic_file_write
already.Signed-off-by: Christoph Hellwig
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
07 Nov, 2005
1 commit
-
This is the fs/ part of the big kfree cleanup patch.
Remove pointless checks for NULL prior to calling kfree() in fs/.
Signed-off-by: Jesper Juhl
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
10 Sep, 2005
1 commit
-
Update the file systems in fs/ implementing a delete_inode() callback to
call truncate_inode_pages(). One implementation note: In developing this
patch I put the calls to truncate_inode_pages() at the very top of those
filesystems delete_inode() callbacks in order to retain the previous
behavior. I'm guessing that some of those could probably be optimized.Signed-off-by: Mark Fasheh
Acked-by: Christoph Hellwig
Signed-off-by: Hugh Dickins
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
17 Apr, 2005
1 commit
-
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.Let it rip!
