01 Jul, 2006
1 commit
-
Signed-off-by: Jörn Engel
Signed-off-by: Adrian Bunk
26 Jun, 2006
1 commit
-
Also revert patch "frv: ieee1394 is borken on frv", as it no longer is.
Signed-off-by: Stefan Richter
Cc: David Howells
Cc: Jody McIntyre
Cc: Ben Collins
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
13 Jun, 2006
1 commit
-
Add support for the following types of hardware:
+ nodes that have a link speed < PHY speed
+ 1394b PHYs that are less than S800 capable
+ 1394b/1394a adapter cable between two 1394b PHYs
Also, S1600 and S3200 are now supported if IEEE1394_SPEED_MAX is raised.A probing function is added to nodemgr's config ROM fetching routine
which adjusts the allowable speed if an access problem was encountered.
Pros and Cons of the approach:
+ minimum code footprint to support this less widely used hardware
+ nearly no overhead for unaffected hardware
- ineffective before nodemgr began to read the ROM of affected nodes
- ineffective if ieee1394 is loaded with disable_nodemgr=1
The speed map CSRs which are published to the bus are not touched by the
patch.Signed-off-by: Stefan Richter
Cc: Hakan Ardo
Cc: Calculex
Cc: Robert J. Kosinski
Signed-off-by: Ben Collins
05 Jan, 2006
2 commits
-
Leave the overloaded "hotplug" word to susbsystems which are handling
real devices. The driver core does not "plug" anything, it just exports
the state to userspace and generates events.Signed-off-by: Kay Sievers
Signed-off-by: Greg Kroah-Hartman
13 Dec, 2005
3 commits
-
Some old 1394-1995 SBP-2 bridges would hang if they received a broadcast write
request to BROADCAST_CHANNEL before the config ROM was read. Affected devices
include Datafab MD2-FW2 2.5" HDD and SmartDisk VST FWCDRW-V8 portable CD writer.
The write request is now directed to specific nodes instead of being broadcast
to all nodes at once, and it is only performed if a previous read request at
this register succeeded.Fixes an old interoperability problem which was perceived as a 2.6.14-specific
regression: http://marc.theaimsgroup.com/?t=113190586800003Signed-off-by: Stefan Richter
Signed-off-by: Jody McIntyre
(cherry picked from 61c7f775ca25ccfc0e51486103a724fb1a3a08f2 commit) -
After initializing an IEEE 1394 host, broadcast a resume packet. This makes
remote nodes visible which suspended their ports while the host was down.
Such nodes had to be unplugged and replugged in order to be recognized.Motorola DCT6200 cable reciever was affected, probably other devices too.
http://marc.theaimsgroup.com/?t=113202715800001Signed-off-by: Stefan Richter
Signed-off-by: Jody McIntyre
(cherry picked from 14c0fa243b358c24040ff5f44b60c47aaf6430c3 commit) -
After a bus reset, let nodemgr call high-level update hooks first for nodes
which do not need to be probed. The main benefit is for a bus with more
than one SBP-2 device: SBP-2 reconnects will be performed before SBP-2
logins, thus have a much higher chance to succeed, and their SCSI devices
will not be blocked much longer than necessary. This was demonstrated for
Linux 2.4 by Dave Cinege a while ago.A better approach would be to perform time-consuming probes in parallel by a
subthread. I actually plan to implement this for sbp2 but it may take a
while to get that done and tested. Until then, this tweak is a huge
improvement for users with multiple SBP-2 devices.Signed-off-by: Stefan Richter
Signed-off-by: Jody McIntyre
06 Dec, 2005
1 commit
-
Some old 1394-1995 SBP-2 bridges would hang if they received a broadcast write
request to BROADCAST_CHANNEL before the config ROM was read. Affected devices
include Datafab MD2-FW2 2.5" HDD and SmartDisk VST FWCDRW-V8 portable CD writer.
The write request is now directed to specific nodes instead of being broadcast
to all nodes at once, and it is only performed if a previous read request at
this register succeeded.Fixes an old interoperability problem which was perceived as a 2.6.14-specific
regression: http://marc.theaimsgroup.com/?t=113190586800003Signed-off-by: Stefan Richter
Signed-off-by: Jody McIntyre
02 Dec, 2005
2 commits
-
Introduce new macros related to phy packets and use them in ieee1394_core and
nodemgr.Signed-off-by: Stefan Richter
Signed-off-by: Jody McIntyre -
After initializing an IEEE 1394 host, broadcast a resume packet. This makes
remote nodes visible which suspended their ports while the host was down.
Such nodes had to be unplugged and replugged in order to be recognized.Motorola DCT6200 cable reciever was affected, probably other devices too.
http://marc.theaimsgroup.com/?t=113202715800001Signed-off-by: Stefan Richter
Signed-off-by: Jody McIntyre
07 Nov, 2005
1 commit
-
dv1394, eth1394, ieee1394, ohci1394, pcilynx, raw1394, sbp2c, video1394:
- use kzalloc
- provide safer size arguments to kmalloc and kzalloc
- omit some castsSigned-off-by: Stefan Richter
Signed-off-by: Jody McIntyre
29 Oct, 2005
1 commit
-
In PM v1, all devices were called at SUSPEND_DISABLE level. Then
all devices were called at SUSPEND_SAVE_STATE level, and finally
SUSPEND_POWER_DOWN level. However, with PM v2, to maintain
compatibility for platform devices, I arranged for the PM v2
suspend/resume callbacks to call the old PM v1 suspend/resume
callbacks three times with each level in order so that existing
drivers continued to work.Since this is obsolete infrastructure which is no longer necessary,
we can remove it. Here's an (untested) patch to do exactly that.Signed-off-by: Russell King
Signed-off-by: Greg Kroah-Hartman
01 Oct, 2005
2 commits
-
Skip a superfluous pause that occured when the config ROM of a node was
scanned unsuccessfully. This also occurs if a node without link wrongly
enables its "link active" self ID flag. A GWCTech 6-port hub does this.Signed-off-by: Stefan Richter
Signed-off-by: Jody McIntyre
Cc: Ben Collins
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Units were not detected if the local IRM performed a bus reset. ("The root
node is not cycle master capable; selecting a new root node and resetting...",
often seen with iPods and other SBP-2 devices). Rearrange the order of IRM
duties and node scanning. TODO: Audit the ROM caching and parsing code for
underlying issues.Signed-off-by: Stefan Richter
Signed-off-by: Jody McIntyre
Cc: Ben Collins
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
08 Sep, 2005
1 commit
-
https://bugzilla.novell.com/show_bug.cgi?id=103746
Old 2.6.13 hotplug enviroment for 'plug in firewire disk' event:
==> debug.01139.ieee1394.add.8211
Cc: Ben Collins
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
11 Jul, 2005
1 commit
-
Lots of this patch is trivial code cleanups (static vars were being
intialized to 0, etc).There's also some fixes for ISO transmits (max buffer handling).
Aswell, we have a few fixes to disable IRM capabilites correctly. We've
also disabled, by default some generally unused EXPORT symbols for the
sake of cleanliness in the kernel. However, instead of removing them
completely, we felt it necessary to have a config option that allowed
them to be enabled for the many projects outside of the main kernel tree
that use our API for driver development.The primary reason for this patch is to revert a MODE6->MODE10 RBC
conversion patch from the SCSI maintainers. The new conversions handled
directly in the scsi layer do not seem to work for SBP2. This patch
reverts to our old working code so that users can enjoy using Firewire
disks and dvd drives again.We are working with the SCSI maintainers to resolve this issue outside
of the main kernel tree. We'll merge the patch once the SCSI layer's
handling of the MODE10 conversion is working for us.Signed-off-by: Linus Torvalds
26 Jun, 2005
1 commit
-
1. Establish a simple API for process freezing defined in linux/include/sched.h:
frozen(process) Check for frozen process
freezing(process) Check if a process is being frozen
freeze(process) Tell a process to freeze (go to refrigerator)
thaw_process(process) Restart process
frozen_process(process) Process is frozen now2. Remove all references to PF_FREEZE and PF_FROZEN from all
kernel sources except sched.h3. Fix numerous locations where try_to_freeze is manually done by a driver
4. Remove the argument that is no longer necessary from two function calls.
5. Some whitespace cleanup
6. Clear potential race in refrigerator (provides an open window of PF_FREEZE
cleared before setting PF_FROZEN, recalc_sigpending does not check
PF_FROZEN).This patch does not address the problem of freeze_processes() violating the rule
that a task may only modify its own flags by setting PF_FREEZE. This is not clean
in an SMP environment. freeze(process) is therefore not SMP safe!Signed-off-by: Christoph Lameter
Signed-off-by: Linus Torvalds
21 Jun, 2005
2 commits
-
… update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> -
Signed-off-by: Greg Kroah-Hartman
diff -Nru a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
17 May, 2005
1 commit
-
This patch removes redundant NULL pointer checks before kfree() in all of
drivers/ieee1394/Signed-off-by: Jesper Juhl
Signed-off-by: Jody McIntyre
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
17 Apr, 2005
1 commit
-
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.Let it rip!
