07 May, 2007
1 commit
-
This implements save and restore hooks for IOMMUs and implements
it the DART iommu.Signed-off-by: Johannes Berg
Acked-by: Benjamin Herrenschmidt
Cc: Olof Johansson
Signed-off-by: Paul Mackerras
07 Feb, 2007
1 commit
-
I/O TLB support for PA6T-1682M.
Signed-off-by: Olof Johansson
Signed-off-by: Paul Mackerras
04 Dec, 2006
3 commits
-
This patch adds full cell iommu support (and iommu disabled mode).
It implements mapping/unmapping of iommu pages on demand using the
standard powerpc iommu framework. It also supports running with
iommu disabled for machines with less than 2GB of memory. (The
default is off in that case, though it can be forced on with the
kernel command line option iommu=force).Signed-off-by: Jeremy Kerr
Signed-off-by: Benjamin Herrenschmidt
Signed-off-by: Paul Mackerras -
This patch completely refactors DMA operations for 64 bits powerpc. 32 bits
is untouched for now.We use the new dev_archdata structure to add the dma operations pointer
and associated data to struct device. While at it, we also add the OF node
pointer and numa node. In the future, we might want to look into merging
that with pci_dn as well.The old vio, pci-iommu and pci-direct DMA ops are gone. They are now replaced
by a set of generic iommu and direct DMA ops (non PCI specific) that can be
used by bus types. The toplevel implementation is now inline.Signed-off-by: Benjamin Herrenschmidt
Signed-off-by: Paul Mackerras
13 Nov, 2006
1 commit
-
iommu_setup_pSeries() and iommu_setup_dart() are declared extern but
are not implemented, so remove them. Remove ifdef around extern
function declaration.Signed-off-by: Sascha Hauer
Signed-off-by: Paul Mackerras
01 Nov, 2006
1 commit
-
The 10Gigabit ethernet device drivers appear to be able to chew
up all 256MB of TCE mappings on pSeries systems, as evidenced by
numerous error messages:iommu_alloc failed, tbl c0000000010d5c48 vaddr c0000000d875eff0 npages 1
Some experimentation indicates that this is essentially because
one 1500 byte ethernet MTU gets mapped as a 64K DMA region when
the large 64K pages are enabled. Thus, it doesn't take much to
exhaust all of the available DMA mappings for a high-speed card.This patch changes the iommu allocator to work with its own
unique, distinct page size. Although the patch is long, its
actually quite simple: it just #defines a distinct IOMMU_PAGE_SIZE
and then uses this in all the places that matter.As a side effect, it also dramatically improves network performance
on platforms with H-calls on iommu translation inserts/removes (since
we no longer call it 16 times for a 1500 bytes packet when the iommu HW
is still 4k).In the future, we might want to make the IOMMU_PAGE_SIZE a variable
in the iommu_table instance, thus allowing support for different HW
page sizes in the iommu itself.Signed-off-by: Linas Vepstas
Signed-off-by: Benjamin Herrenschmidt
Acked-by: Olof Johansson
Acked-by: Stephen Rothwell
Signed-off-by: Paul Mackerras
23 Jun, 2006
1 commit
-
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits)
[POWERPC] re-enable OProfile for iSeries, using timer interrupt
[POWERPC] support ibm,extended-*-frequency properties
[POWERPC] Extra sanity check in EEH code
[POWERPC] Dont look for class-code in pci children
[POWERPC] Fix mdelay badness on shared processor partitions
[POWERPC] disable floating point exceptions for init
[POWERPC] Unify ppc syscall tables
[POWERPC] mpic: add support for serial mode interrupts
[POWERPC] pseries: Print PCI slot location code on failure
[POWERPC] spufs: one more fix for 64k pages
[POWERPC] spufs: fail spu_create with invalid flags
[POWERPC] spufs: clear class2 interrupt status before wakeup
[POWERPC] spufs: fix Makefile for "make clean"
[POWERPC] spufs: remove stop_code from struct spu
[POWERPC] spufs: fix spu irq affinity setting
[POWERPC] spufs: further abstract priv1 register access
[POWERPC] spufs: split the Cell BE support into generic and platform dependant parts
[POWERPC] spufs: dont try to access SPE channel 1 count
[POWERPC] spufs: use kzalloc in create_spu
[POWERPC] spufs: fix initial state of wbox file
...Manually resolved conflicts in:
drivers/net/phy/Makefile
include/asm-powerpc/spu.h
15 Jun, 2006
1 commit
-
Allocate IOMMU tables local to the relevant node.
Signed-off-by: Anton Blanchard
Acked-by: Olof Johansson
Signed-off-by: Paul Mackerras
09 Jun, 2006
1 commit
-
Make sure dma_alloc_coherent allocates memory from the local node. This
is important on Cell where we avoid going through the slow cpu
interconnect.Note: I could only test this patch on Cell, it should be verified on
some pseries machine by those that have the hardware.Signed-off-by: Christoph Hellwig
Signed-off-by: Paul Mackerras
26 Apr, 2006
1 commit
-
Signed-off-by: David Woodhouse
21 Apr, 2006
1 commit
-
Some devices don't support full 32-bit DMA address space, which we currently
assume. Add the required mask-passing to the IOMMU allocators.Signed-off-by: Olof Johansson
Signed-off-by: Paul Mackerras
12 Jan, 2006
1 commit
-
There was a function declared for CONFIG_PSERIES which no longer exists
and the two function declarations for CONFIG_ISERIES have been moved
into an include file in platforms/iseries since they are defined and
used only there.Signed-off-by: Stephen Rothwell
Signed-off-by: Paul Mackerras
09 Jan, 2006
2 commits
-
include/asm-ppc/ had #ifdef __KERNEL__ in all header files that
are not meant for use by user space, include/asm-powerpc does
not have this yet.This patch gets us a lot closer there. There are a few cases
where I was not sure, so I left them out. I have verified
that no CONFIG_* symbols are used outside of __KERNEL__
any more and that there are no obvious compile errors when
including any of the headers in user space libraries.Signed-off-by: Arnd Bergmann
Signed-off-by: Paul Mackerras -
This adds some very basic support for the new machines, including the
Quad G5 (tested), and other new dual core based machines and iMac G5
iSight (untested). This is still experimental ! There is no thermal
control yet, there is no proper handing of MSIs, etc.. but it
boots, I have all 4 cores up on my machine. Compared to the previous
version of this patch, this one adds DART IOMMU support for the U4
chipset and thus should work fine on setups with more than 2Gb of RAM.Signed-off-by: Benjamin Herrenschmidt
Signed-off-by: Paul Mackerras
23 Nov, 2005
1 commit
-
Email address update, changing old work address to personal (permanent)
one.Signed-off-by: Olof Johansson
Signed-off-by: Paul Mackerras
07 Nov, 2005
1 commit
-
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel
base page size to 64K. The resulting kernel still boots on any
hardware. On current machines with 4K pages support only, the kernel
will maintain 16 "subpages" for each 64K page transparently.Note that while real 64K capable HW has been tested, the current patch
will not enable it yet as such hardware is not released yet, and I'm
still verifying with the firmware architects the proper to get the
information from the newer hypervisors.Signed-off-by: Benjamin Herrenschmidt
Signed-off-by: Linus Torvalds
14 Oct, 2005
1 commit
-
The only real user of this file outside platforms/iseries was
drivers/net/iseries_veth.c but all it wanted was ISERIES_HV_ADDR()
so we move that to abs_addr.h (and lowercase it).Signed-off-by: Stephen Rothwell
12 Oct, 2005
1 commit
-
Recent commits upstream have changed files which are currently
duplicated in arch/powerpc and include/asm-powerpc. This updates
them with the corresponding changes.Signed-off-by: Paul Mackerras
06 Oct, 2005
1 commit
-
This brings in the ppc64 version of prom_init.c, prom.c and btext.c
and makes them work for ppc32. This also brings in the new calling
convention, where the first entry to the kernel (with r5 != 0) goes
to the prom_init code, which then restarts from the beginning (with
r5 == 0) after it has done its stuff.For now this also brings in the ppc32 version of setup.c. It also
merges lmb.h.Signed-off-by: Paul Mackerras