03 May, 2011
1 commit
-
Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville
26 Apr, 2011
1 commit
-
Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville
05 Jun, 2010
1 commit
-
In kernel Bugzilla #15825 (2 users), in a wireless mailing list thread
(http://lists.infradead.org/pipermail/b43-dev/2010-May/000124.html), and on a
netbook owned by John Linville
(http://marc.info/?l=linux-wireless&m=127230751408818&w=4), there are reports
of ssb failing to detect an SPROM at the normal location. After studying the
MMIO trace dump for the Broadcom wl driver, it was determined that the affected
boxes had a relocated SPROM.This patch fixes all systems that have reported this problem.
Signed-off-by: Larry Finger
Cc: Stable
Signed-off-by: John W. Linville
04 Jun, 2010
1 commit
-
Signed-off-by: Rafał Miłecki
Acked-by: Gábor Stefanik
Signed-off-by: John W. Linville
27 Apr, 2010
1 commit
-
Attempting to read registers that don't exist on the SSB bus can cause
hangs on some boxes. At least some b43 devices are 'in the wild' that
don't have SPROMs at all. When the SSB bus support loads, it attempts
to read these (non-existant) SPROMs and causes hard hangs on the box --
no console output, etc.This patch adds some intelligence to determine whether or not the SPROM
is present before attempting to read it. This avoids those hard hangs
on those devices with no SPROM attached to their SSB bus. The
SSB-attached devices (e.g. b43, et al.) won't work, but at least the box
will survive to test further patches. :-)Signed-off-by: John W. Linville
Signed-off-by: Rafał Miłecki
Cc: Larry Finger
Cc: Michael Buesch
11 Mar, 2010
1 commit
-
The latest changes in the N PHY core require the symbol
ssb_chipco_gpio_control to be exported.Signed-off-by: Larry Finger
Signed-off-by: John W. Linville
10 Feb, 2009
1 commit
-
This adds support for the SSB PMU.
A PMU is found on Low-Power devices.Signed-off-by: Michael Buesch
Signed-off-by: John W. Linville
09 Apr, 2008
1 commit
-
Turn the SSB bus suspend mechanism upside down.
Instead of deciding by an internal reference count when to suspend/resume,
let the parent bus call us in their suspend/resume routine.Signed-off-by: Michael Buesch
Signed-off-by: John W. Linville
01 Mar, 2008
1 commit
-
This patch adds functions to setup and read the CHIPCO IRQ.
Signed-off-by: Aurelien Jarno
Signed-off-by: Michael Buesch
Signed-off-by: John W. Linville
21 Feb, 2008
3 commits
-
This fixes the GPIO API to be reentrancy safe.
Signed-off-by: Michael Buesch
Signed-off-by: John W. Linville -
This fixes the GPIO API to be usable.
Signed-off-by: Michael Buesch
Signed-off-by: John W. Linville -
This fixes the baud settings for new devices
like the Linksys WRT350n.Signed-off-by: Michael Buesch
Signed-off-by: John W. Linville
11 Oct, 2007
2 commits
-
This fixes all Sparse warnings in SSB.
No semantics change.Signed-off-by: Michael Buesch
Signed-off-by: John W. Linville
Signed-off-by: David S. Miller -
SSB is an SoC bus used in a number of embedded devices. The most
well-known of these devices is probably the Linksys WRT54G, but there
are others as well. The bus is also used internally on the BCM43xx
and BCM44xx devices from Broadcom.This patch also includes support for SSB ID tables in modules, so
that SSB drivers can be loaded automatically.Signed-off-by: Michael Buesch
Signed-off-by: John W. Linville
Signed-off-by: David S. Miller