03 May, 2010
1 commit
-
This patch adds very basic support for ECONA CNS3xxx ARM11 MPcore
(ARMv6) dual-core processors.Note that SMP is not yet supported, as well as many peripheral
devices. Support for these features will be added later.Signed-off-by: Anton Vorontsov
01 May, 2010
39 commits
-
iop32x_defconfig:
In file included from include/linux/elf.h:7,
from kernel/elfcore.c:1:
arch/arm/include/asm/elf.h:101: warning: "struct task_struct" declared inside parameter list
arch/arm/include/asm/elf.h:101: warning: its scope is only this definition or declaration, which is probably not what you wantSigned-off-by: Andrew Morton
Signed-off-by: Russell King -
Test the just-allocated value for NULL rather than some other value.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)//
@@
expression x,y;
statement S;
@@x = \(kmalloc\|kcalloc\|kzalloc\)(...);
(
if ((x) == NULL) S
|
if (
- y
+ x
== NULL)
S
)
//Signed-off-by: Julia Lawall
Cc: Eric Miao
Signed-off-by: Andrew Morton
Signed-off-by: Russell King -
Just to make sure that this driver won't run on StrongArm SA1100
when both SA1100 and SA1110 cpufreq drivers are built in (usually
in multimachine config). SA1100 driver already has similar check.Signed-off-by: Dmitry Artamonow
Acked-by: Eric Miao
Acked-by: Kristoffer Ericson
Signed-off-by: Russell King -
They have StrongARM SA1110, not SA1100.
Signed-off-by: Dmitry Artamonow
Acked-by: Eric Miao
Acked-by: Kristoffer Ericson
Signed-off-by: Russell King -
Signed-off-by: Russell King
-
This patch fixes the preempt leak in the cpuidle path invoked from
cpu-hotplug. The fix is suggested by Russell King and is based
on x86 idea of calling init_idle() on the idle task when it's
re-used which also resets the preempt count amongst other thingsdump:
BUG: scheduling while atomic: swapper/0/0x00000002
Modules linked in:
Backtrace:
[] (dump_backtrace+0x0/0x110) from [] (dump_stack+0x18/0x1c)
r7:c02149e4 r6:c033df00 r5:c7836000 r4:00000000
[] (dump_stack+0x0/0x1c) from [] (__schedule_bug+0x60/0x70)
[] (__schedule_bug+0x0/0x70) from [] (schedule+0x98/0x7b8)
r5:c7836000 r4:c7836000
[] (schedule+0x0/0x7b8) from [] (cpu_idle+0xb4/0xd4)
# [] (cpu_idle+0x0/0xd4) from [] (secondary_start_kernel+0xe0/0xf0)
r5:c7836000 r4:c0205f40
[] (secondary_start_kernel+0x0/0xf0) from [] (prm_rmw_mod_reg_bits+0x88/0xa4)
r7:c02149e4 r6:00000001 r5:00000001 r4:c7836000
Backtrace aborted due to bad frame pointerCc: Catalin Marinas
Signed-off-by: Santosh Shilimkar
Signed-off-by: Russell King -
With CONFIG_KPROBES enabled two section are getting created which
leads to below build break.LOG:
AS arch/arm/kernel/entry-armv.o
arch/arm/kernel/entry-armv.S: Assembler messages:
arch/arm/kernel/entry-armv.S:431: Error: symbol ret_from_exception is in a different section
arch/arm/kernel/entry-armv.S:490: Error: symbol ret_from_exception is in a different section
arch/arm/kernel/entry-armv.S:491: Error: symbol __und_usr_unknown is in a different sectionThis was introduced by commit 4260415f6a3b92c5c986398d96c314df37a4ccbf
Reported-by: Anand Gadiyar
Signed-off-by: Santosh Shilimkar
Signed-off-by: Russell King -
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
Staging: vme: Re-introduce necessary brackets
Staging: iio: fix up the iio_get_new_idr_val comment
Staging: add Add Sitecom WL-349 to rtl8192su
Staging: rt2860: add Belkin F5D8055 Wireless-N USB Dongle device id
staging: rtl8192su: add Support for Belkin F5D8053 v6
Staging: dt3155: fix 50Hz configuration
staging: usbip: Fix deadlock
Staging: rtl8192su: add USB ID for 0bda:8171
Staging: hv: name network device ethX rather than sethX
Staging: hv: Fix up memory leak on HvCleanup
Staging: hv: Fix a bug affecting IPv6
staging: iio: ring_sw: Fix incorrect test on successful read of last value, causes infinite loop
staging: iio: Function iio_get_new_idr_val() return negative value if fails.
Staging: iio: adc: fix dangling pointers
Staging: iio: light: fix dangling pointers
Staging: iio: test for failed allocation
staging: iio: lis3l02dq - incorrect ws used in container of call. -
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
serial: drivers/serial/pmac_zilog.c: add missing unlock
serial: 8250_pnp - add Fujitsu Wacom device
tty: Fix regressions in the char driver conversion -
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (29 commits)
USB: sl811-hcd: Fix device disconnect
USB: ohci-at91: fix power management hanging
USB: rename usb_buffer_alloc() and usb_buffer_free()
USB: ti_usb: fix printk format warning
USB: gadget: s3c-hsotg: Add missing unlock
USB: fix build on OMAPs if CONFIG_PM_RUNTIME is not set
USB: oxu210hp: release spinlock on error path
USB: serial: option: add cinterion device id
USB: serial: option: ZTEAC8710 Support with Device ID 0xffff
USB: serial: pl2303: Hybrid reader Uniform HCR331
USB: option: add ID for ZTE MF 330
USB: xhci: properly set endpoint context fields for periodic eps.
USB: xhci: properly set the "Mult" field of the endpoint context.
USB: OHCI: don't look at the root hub to get the number of ports
USB: don't choose configs with no interfaces
USB: cdc-acm: add another device quirk
USB: fix testing the wrong variable in fs_create_by_name()
usb: Fix tusb6010 for DMA API
musb_core: fix musb_init_controller() error cleanup path
MUSB: fix DaVinci glue layer dependency
... -
Correct two mishaps which prevented reporting error type (CECC vs UECC)
and extended error description.Cc: # 32.x, 33.x
Signed-off-by: Borislav Petkov
Signed-off-by: Linus Torvalds -
CONFIG_INOTIFY_USER defined but CONFIG_ANON_INODES undefined will result
in the following build failure:LD vmlinux
fs/built-in.o: In function 'sys_inotify_init1':
(.text.sys_inotify_init1+0x22c): undefined reference to 'anon_inode_getfd'
fs/built-in.o: In function `sys_inotify_init1':
(.text.sys_inotify_init1+0x22c): relocation truncated to fit: R_MIPS_26 against 'anon_inode_getfd'
make[2]: *** [vmlinux] Error 1
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2Signed-off-by: Ralf Baechle
Cc: Al Viro
Signed-off-by: Linus Torvalds -
* 'merge' of git://git.secretlab.ca/git/linux-2.6:
spi: spidev_test gives error upon 1-byte transfer
omap2_mcspi: small fixes of output data format
omap2_mcspi: Flush posted writes
spi: spi_device memory should be released instead of device.
spi: release device claimed by bus_find_device_by_name
of: check for IS_ERR()
serial/mpc52xx_uart: Drop outdated comments
gpio: potential null dereference -
Somehow I managed to remove a set of rather necessary brackets in commit
29848ac9f3b33bf171439ae2d66d40e6a71446c4. Put them back.Signed-off-by: Martyn Welch
Signed-off-by: Greg Kroah-Hartman -
improve the comment a bit
Cc: Greg KH
Cc: Jonathan Cameron
Cc: Sonic Zhang
Signed-off-by: Andrew Morton
Signed-off-by: Greg Kroah-Hartman -
Add usb id of Sitecom WL-349 to rtl8192su
Signed-off-by: Rodrigo Linfati
Signed-off-by: Greg Kroah-Hartman -
Add Belkin F5D8055 Wireless-N USB support to the rt2870
staging driver.Signed-off-by: Chris Largret
Signed-off-by: Greg Kroah-Hartman -
Please find attached a patch which adds the device ID for the Belkin
F5D8053 v6 to the rtl8192su driver. I've tested this in 2.6.34-rc3
(Ubuntu 9.10 amd64) and the network adapter is working flawlessly.Signed-off-by: Richard Airlie
Signed-off-by: Greg Kroah-Hartman -
According to the header file, dt3155_io.h, the 50/60 Hz configuration
is controlled by a bit in the I2C CSR2 register (bit 2). The function
dt3155_init_isr actually reads the I2C CONFIG register into the global
I2C_CSR union variable then modifies the bit. It then does a write
to the I2C CONFIG register with the global I2C_CONFIG union variable
which is not even set with a value anywhere in the driver.My guess is 50Hz operation doesn't even work as-is.
Fix this by actually reading and writing the correct register with
the correct value.Signed-off-by: H Hartley Sweeten
Cc: Simon Horman
Signed-off-by: Greg Kroah-Hartman -
When detaching a port from the client side (usbip --detach 0),
the event thread, on the server side, is going to deadlock.
The "eh" server thread is getting USBIP_EH_RESET event and calls:
-> stub_device_reset() -> usb_reset_device()
the USB framework is then calling back _in the same "eh" thread_ :
-> stub_disconnect() -> usbip_stop_eh() -> wait_for_completion()
the "eh" thread is being asleep forever, waiting for its own completion.
This patch checks if "eh" is the current thread, in usbip_stop_eh().Signed-off-by: Eric Lescouet
Cc: stable
Signed-off-by: Greg Kroah-Hartman -
Signed-off-by: Pavel Roskin
Signed-off-by: Greg Kroah-Hartman -
This patch makes the HyperV network device use the same naming scheme as
other virtual drivers (Xen, KVM). In an ideal world, userspace tools
would not care what the name is, but some users and applications do
care. Vyatta CLI is one of the tools that does depend on what the name
is.Signed-off-by: Stephen Hemminger
Cc: Hank Janssen
Cc: stable
Signed-off-by: Greg Kroah-Hartman -
Don't assign NULL too early
Signed-off-by: Cyrill Gorcunov
Cc: Hank Janssen
Cc: Haiyang Zhang
Cc: stable
Signed-off-by: Greg Kroah-Hartman -
Fix a bug affecting IPv6
Added the multicast flag for proper IPv6 function.Reported-by: Toshikazu Sakai
Signed-off-by: Hank Janssen
Signed-off-by: Haiyang Zhang
Cc: stable
Signed-off-by: Greg Kroah-Hartman -
This is a bad one. The test means that almost no reads of the last
value ever succeed! Result is an infinite loop.Another one for the 'oops' category.
Signed-off-by: Jonathan Cameron
Signed-off-by: Greg Kroah-Hartman -
Function iio_get_new_idr_val() return negative value if fails.
So, only error when ret < 0 in iio_device_register_eventset().Signed-off-by: Sonic Zhang
Acked-by: Jonathan Cameron
Signed-off-by: Greg Kroah-Hartman -
Fix I2C-drivers which missed setting clientdata to NULL before freeing the
structure it points to. Also fix drivers which do this _after_ the structure
was freed already.Signed-off-by: Wolfram Sang
Acked-by: Jonathan Cameron
Signed-off-by: Greg Kroah-Hartman -
Fix I2C-drivers which missed setting clientdata to NULL before freeing the
structure it points to. Also fix drivers which do this _after_ the structure
was freed already.Signed-off-by: Wolfram Sang
Acked-by: Jonathan Cameron
Signed-off-by: Greg Kroah-Hartman -
We should return test to see if iio_allocate_trigger() fails and return -ENOMEM.
Signed-off-by: Dan Carpenter
Acked-by: Jonathan Cameron
Signed-off-by: Greg Kroah-Hartman -
The word oops comes to mind. Original patch to merge the two work queues
in here (prior to Greg taking them into staging) changed the top half to
only use one of them and the bottom half to assume it was the other.Currently causes a NULL pointer dereference if you enable any of the events
on an lis3l02dq. Just goes to show I need a few more regression tests.Signed-of-by: Jonathan Cameron
Signed-off-by: Greg Kroah-Hartman -
A while ago I provided a patch that fixed device detection after device
removal (USB: sl811-hcd: Fix device disconnect).
Chris Brissette pointed out that the detection/removal counter method
to distinguish insert or remove my fail under certain conditions.
Latest SL811HS datasheet (Document 38-08008 Rev. *D) indicates that
bit 6 (SL11H_INTMASK_RD) of the Interrupt Status Register together with
bit 5 (SL11H_INTMASK_INSRMV) can be used to determine whether a device
has been inserted or removed.Signed-off-by: Michael Hennerich
Signed-off-by: Mike Frysinger
Signed-off-by: Greg Kroah-Hartman -
A hanging has been detected in ohci-at91 while going in suspend to ram. This is
due to asynchronous operations between ohci reset and ohci clocks shutdown.
This patch adds the reading of the control register between the reset of the
ohci and clocks stop. This "flush the writes" idea was taken from ohci-hcd.c
file (ohci_shutdown() function).Signed-off-by: Patrice Vilchez
Signed-off-by: Nicolas Ferre
Signed-off-by: Greg Kroah-Hartman -
For more clearance what the functions actually do,
usb_buffer_alloc() is renamed to usb_alloc_coherent()
usb_buffer_free() is renamed to usb_free_coherent()They should only be used in code which really needs DMA coherency.
[added compatibility macros so we can convert things easier - gregkh]
Signed-off-by: Daniel Mack
Cc: Alan Stern
Cc: Pedro Ribeiro
Signed-off-by: Greg Kroah-Hartman -
Fix printk format warning in usbserial/ti_usb:
drivers/usb/serial/ti_usb_3410_5052.c:1738: warning: format '%d' expects type 'int', but argument 5 has type 'size_t'
Signed-off-by: Randy Dunlap
Signed-off-by: Greg Kroah-Hartman -
In an error handling case the lock is not unlocked. The return is
converted to a goto, to share the unlock at the end of the function.A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)//
@r exists@
expression E1;
identifier f;
@@f (...) { }
//Signed-off-by: Julia Lawall
Signed-off-by: Greg Kroah-Hartman -
With patch as1329 (USB: convert to the runtime PM framework),
we make USB_SUSPEND depend on PM_RUNTIME instead of CONFIG_PM.Also, CONFIG_USB_OTG selects CONFIG_USB_SUSPEND.
If PM_RUNTIME is not enabled, and we try to enable USB_OTG,
we will end up with CONFIG_USB_SUSPEND selected. This is
due to a known bug with the select statement.This makes the build break on various OMAP configs (which
have CONFIG_USB_OTG set by default, but do not yet have
CONFIG_PM_RUNTIME enabled).Avoid this by changing the logic for CONFIG_USB_OTG from
"select USB_SUSPEND" to "depends on USB_SUSPEND"Signed-off-by: Anand Gadiyar
CC: Michal Marek
CC: Tony Lindgren
CC: Alan Stern
Signed-off-by: Greg Kroah-Hartman -
Smatch complained about this missing spinlock.
Signed-off-by: Dan Carpenter
Signed-off-by: Greg Kroah-Hartman -
This adds a device id for a Cinterion device.
Reported-by: John Race
Signed-off-by: Greg Kroah-Hartman -
PATCH TO EXTEND SUPPORT TO AC8710 WITH 0xFFFF Product ID.
Signed-off-by: Mahesh Kuruganti
Signed-off-by: Greg Kroah-Hartman
