30 Jul, 2006
21 commits
-
A patch from Aug, 17 activated by mistake OVERLAY flag on cx88-video,
together with several cx88-blackbird cleanups. This makes the cx88 driver
to report:
/dev/video0 [v4l2]: ioctl VIDIOC_G_FBUF: Invalid argument
instead of:
/dev/video0 [v4l2]: no overlay supportSigned-off-by: Mauro Carvalho Chehab
-
Signed-off-by: Mauro Carvalho Chehab
-
Removed usage of HAVE_V4L1
Including videodev.h will just include videodev2.h if V4L1 is not supported
V4L1 code at core drivers will honor CONFIG_V4L1_COMPAT stuffSigned-off-by: Mauro Carvalho Chehab
-
u64 is aligned as 128bits on x86_64 architetures, requiring an special
handling to ioctls that depends on v4l2_ext_control.
Let's fix this before ext controls go to kernel mainstream to avoid one
more compat32 stuff.Signed-off-by: Mauro Carvalho Chehab
-
video_code size is 24 on i386 and 32 on x86_64, so a proper handling is needed
on compat_ioctl32 to fix it.
This code should be tested, since just *a few* boards use this ioctl.Signed-off-by: Mauro Carvalho Chehab
-
Trent Piepho pointed out that the pll test i2c transmission is slightly
wrong; it was transmitting a zero length message, and then reading from the
PLL. This was wrong; it should only be transmitting a single read i2c message.Signed-off-by: Andrew de Quincey
Signed-off-by: Mauro Carvalho Chehab -
Supplying a NULL i2c adapter to dvb_pll_attach is allowed, for example with
mt352 demods. However, the pll i2c probe will segfault because it does not
check for this.Signed-off-by: Andrew de Quincey
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Mike Isely
Signed-off-by: Mauro Carvalho Chehab -
Fix bug reported by Andrew de Quincey:
After cold boot the saa7146 DMA did not start if the demuxer was opened
before the frontend has locked to the signal.
DMA transfers will be started now if (and only if)
the frontend is locked and data should be sent to the demuxer.Signed-off-by: Oliver Endriss
Signed-off-by: Mauro Carvalho Chehab -
Check __must_check warnings for class_device_register and class_device_create_file
video_device_create_file was declared as a void, but instead should
return the int value of class_device_create_file.Move the check from bttv-driver.c into v4l2-dev.h, because all other
callers of video_device_create_file must also be checked.Replace the call to class_device_create_file in videodev.c with
video_device_create_file, as defined in v4l2-dev.h, so that the
return value of class_device_create_file will be checked.Check the return value of class_device_register in videodev.c and
pvrusb2-sysfs.cSigned-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
With the LG H06xF tuners, an auxiliary byte must be sent after the
standard four-byte i2c sequence. The code that does this is currently in
the wrong place, causing random bytes to be written to the tuner over
i2c in the set_type function.
This patch moves this code from set_type to default_set_tv_freq.Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab -
Fix keycode calculations (all codes for this remote were wrong due to a
lost + sign)Signed-off-by: Ricardo Cerqueira
Signed-off-by: Mauro Carvalho Chehab -
Two different exports with the same name are not a good idea:
$ grep -r EXPORT_SYMBOL\(dmasound_init\) *
drivers/media/video/saa7134/saa7134-core.c:EXPORT_SYMBOL(dmasound_init);
sound/oss/dmasound/dmasound_core.c:EXPORT_SYMBOL(dmasound_init);
$
This patch renames the saa7134 dmasound_{init,exit} to
saa7134_dmasound_{init,exit}.Signed-off-by: Adrian Bunk
Signed-off-by: Mauro Carvalho Chehab -
This patch just sets the option noninterlaced to 1 by default since
it has no known disadvantages. It is still possibe to get the old
behaviour by setting noninterlaced=0.Signed-off-by: Hartmut Hackmann
Signed-off-by: Mauro Carvalho Chehab -
Signed-off-by: Randy Dunlap
Signed-off-by: Mauro Carvalho Chehab -
To prevent autoloading of the driver, as it then conflicts with every other
saa7146 device in existence.Signed-off-by: Andrew de Quincey
Signed-off-by: Mauro Carvalho Chehab -
Fix typo in comment for TDA9819
Signed-off-by: Marco Schluessler
Signed-off-by: Andrew de Quincey
Signed-off-by: Mauro Carvalho Chehab -
It was pointed out on the mailing list that this PLL definition is broken. I
went back to the original dibusb driver and confirmed it used to use these
settings, as well as consulting the datasheet.Signed-off-by: Andrew de Quincey
Signed-off-by: Mauro Carvalho Chehab -
Use the stv0299 native DISEQC implementation instead of the bitbanging one
as required by the ves1893. This was originally found by Oliver Endriss.Signed-off-by: Andrew de Quincey
Signed-off-by: Oliver Endriss
Signed-off-by: Mauro Carvalho Chehab -
The changes to add frontend reinitialisation moved the position where the
init() op is called into the frontend thread. Unfortunately, since DISEQC
operations do not use the frontend thread, this meant that DISEQC could be
called against an uninitalised frontend, leading to all sorts of trouble.
Patch fixes this by reinstating the original fronted intialisation call.Signed-off-by: Andrew de Quincey
Signed-off-by: Mauro Carvalho Chehab -
Some cards have multiple possible addresses for their PLLs, with no other
way to tell if a PLL is present or not apart from probing to see if an i2c
device is present. This adds a quick check to see if an i2c device is
present at the given i2c address.Signed-off-by: Andrew de Quincey
Acked-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab
29 Jul, 2006
19 commits
-
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
[libata] sata_promise: comment out duplicate PCI ID
[PATCH] libata: improve EH action and EHI flag handling
[PATCH] libata: fix eh_skip_recovery condition
[PATCH] libata: fix autopsy ehc->i.action and ehc->i.dev handling -
…6 into upstream-fixes
-
Okay, Fix both typo's in one patch .The impact is that the incorrect value
was being computed for blinking LED and interrupt moderation values.Signed-off-by: Stephen Hemminger
Signed-off-by: Jeff Garzik -
Always do a dummy RDMA after loading the firmware to work around
buggy PCIe chipsets which do not implement resending properly.
This is so cheap as to be almost free, and should never have been
conditional on the tx boundary != 4096.Signed-off-by: Brice Goglin
Signed-off-by: Jeff Garzik -
…inville/wireless-2.6 into upstream-fixes
-
Fix robust PI-futexes to be properly unlocked on unexpected exit.
For this to work the kernel has to know whether a futex is a PI or a
non-PI one, because the semantics are different. Since the space in
relevant glibc data structures is extremely scarce, the best solution is
to encode the 'PI' information in bit 0 of the robust list pointer.
Existing (non-PI) glibc robust futexes have this bit always zero, so the
ABI is kept. New glibc with PI-robust-futexes will set this bit.Further fixes from Thomas Gleixner
Signed-off-by: Ingo Molnar
Signed-off-by: Ulrich Drepper
Signed-off-by: Thomas Gleixner
Signed-off-by: Linus Torvalds -
Fix pi_state->list handling bugs: list handling mishap, locking error.
Plus add more debug checks and fix a few style issues i noticed while
debugging this.(reported by Ulrich Drepper and Jakub Jelinek.)
Signed-off-by: Ingo Molnar
Signed-off-by: Linus Torvalds -
Similar patch to earlier x86-64 patch. When the dwarf2 unwinder fails
dump the left over stack with the old unwinder.Also some clarifications in the headers.
Signed-off-by: Andi Kleen
Signed-off-by: Linus Torvalds -
Signed-off-by: Andi Kleen
Signed-off-by: Linus Torvalds -
The dwarf2 unwinder currently often gets stuck because a lot
of assembly code doesn't have proper dwarf2 annotiation yet.This currently often happens with __down. Should fix this by
adding proper dwarf2 annotation to all inline assembly. However
until that's done we need a quick fix for 2.6.18 to avoid
incomplete backtraces.So when this happens dump the rest of the stack with the old unwinder
instead of silently not dumping it. There was already a optional
"both" mode that dumped both, but that was too ugly.I also clarified the headers for the different backtraces a bit.
Also add a clear error message for missing dwarf2
annotation that people can work on.And I removed a dead variable left over from Ingo's changes.
Cc: mingo@elte.hu
Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen
Signed-off-by: Linus Torvalds -
In x86_64 platform, INT1 and INT3 trap stack is IST stack called DEBUG_STACK,
when INT1/INT3 trap happens, system will switch to DEBUG_STACK by hardware.
Current DEBUG_STACK size is 4K, when int1/int3 trap happens, kernel will
minus current DEBUG_STACK IST value by 4k. But if int3/int1 trap is nested,
it will destroy other vector's IST stack. This patch modifies this, it sets
DEBUG_STACK size as 8K and allows two level of nested int1/int3 trap.Kprobe DEBUG_STACK may be nested, because kprobe handler may be probed
by other kprobes.Thanks jbeulich for pointing out error in the first patch.
[AK: nested kprobes are pretty dubious. Hopefully one nest
will be enough. This will cost 8K per CPU (4K more than before)]Signed-off-by: bibo, mao
Signed-off-by: Andi Kleen
Signed-off-by: Linus Torvalds -
When int 0x80 is called from long mode r8-r11 would leak out of the
kernel (or rather they would be filled with some values from
the kernel stack). I don't think it's a security issue because
the values come from the fixed stack frame which should be near
always user registers from a previous interrupt.Still better fix it.
Longer term the register save macros need to be cleaned up
to avoid such mistakes in the future.Original analysis from Richard Brunner, fix by me.
Cc: Richard.Brunner@amd.com
Signed-off-by: Andi Kleen
Signed-off-by: Linus Torvalds -
Fixes a obscure user space triggerable crash during oprofiling.
Oprofile calls profile_pc from NMIs even when user_mode(regs) is not true and
the program counter is inside the kernel lock section. This opens
a race - when a user program jumps to a kernel lock address and
a NMI happens before the illegal page fault exception is raised
and the program has a unmapped esp or ebp then the kernel could
oops. NMIs have a higher priority than exceptions so that could
happen.Add user_mode checks to i386/x86-64 profile_pc to prevent that.
Cc: John Levon
Signed-off-by: Andi Kleen
Signed-off-by: Linus Torvalds -
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] update default configuration
[S390] duplicate ccw devices in ccwgroup.
[S390] permanent subchannel busy conditions may cause I/O stall -
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SUNLANCE]: fix compilation on sparc-UP
[SPARC]: Defer clock_probe to fs_initcall()
[SPARC64]: Fix typo in pgprot_noncached().
[SPARC64]: Fix quad-float multiply emulation. -
* git://oss.sgi.com:8090/nathans/xfs-rc-2.6:
[XFS] Ensure bulkstat from an invalid inode number gets caught always with
[XFS] Fix a barrier related forced shutdown on mounts with quota enabled.
[XFS] Fix remount vs no/barrier options by ensuring we clear unwanted
[XFS] All xfs_disk_dquot_t values are (as the name says) disk endian. -
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block:
[PATCH] scsi: kill overeager "not-ready" messages
[PATCH] it821x: fix ide dma setup bug
[PATCH] ide: if the id fields looks screwy, disable DMA
[PATCH] ide: option to disable cache flushes for buggy drives -
Recent changes in i386 __switch_to() have a misplaced closing
parenthesis causing an unlikely() to terminate early.Signed-off-by: Chuck Ebbert
Acked-by: Steven Rostedt
Signed-off-by: Linus Torvalds
