01 Nov, 2011
2 commits
-
Fix in advance, or we will get things like this:
drivers/bcma/core.c:20: warning: data definition has no type or storage class
drivers/bcma/core.c:20: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
drivers/bcma/core.c:20: warning: parameter names (without types) in function declarationSigned-off-by: Paul Gortmaker
-
This will ensure that it continues to build once we remove
the implicit module.h presence from everywhere later on.Signed-off-by: Paul Gortmaker
21 Sep, 2011
1 commit
-
Conflicts:
drivers/net/wireless/iwlwifi/iwl-pci.c
drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c
drivers/net/wireless/rt2x00/rt2800usb.c
drivers/net/wireless/wl12xx/main.c
20 Sep, 2011
1 commit
-
Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville
14 Sep, 2011
1 commit
-
Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville
25 Aug, 2011
1 commit
-
The u32 would never be less than zero so the error handling would
break. I changed it to s32 to match how bcma_erom_get_mst_port() is
declared.Signed-off-by: Dan Carpenter
Signed-off-by: John W. Linville
23 Aug, 2011
2 commits
-
We need to disable ext. PA lines for reading SPROM. It's disabled by
default, but this patch allows using bcma after loading wl, which leaves
workaround enabled.Cc: Arend van Spriel
Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville -
Signed-off-by: David Woodhouse
Acked-by: Rafał Miłecki
Signed-off-by: John W. Linville
10 Aug, 2011
1 commit
-
Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville
09 Aug, 2011
7 commits
-
Add method to return the clock of the CPU. This is needed by the arch
code to calculate the mips_hpt_frequency.Signed-off-by: Hauke Mehrtens
Acked-by: Ralf Baechle
Signed-off-by: John W. Linville -
This adds support for serial console to bcma, when operating on an SoC.
Signed-off-by: Hauke Mehrtens
Acked-by: Ralf Baechle
Signed-off-by: John W. Linville -
This adds a mips driver to bcma. This is only found on embedded
devices. For now the driver just initializes the irqs used on this
system.Signed-off-by: Hauke Mehrtens
Acked-by: Ralf Baechle
Signed-off-by: John W. Linville -
This patch adds support for using bcma on a Broadcom SoC as the system
bus. An SoC like the bcm4716 could register this bus and use it to
searches for the bcma cores and register the devices on this bus.BCMA_HOSTTYPE_NONE was intended for SoCs at first but BCMA_HOSTTYPE_SOC
is a better name.Acked-by: Rafał Miłecki
Signed-off-by: Hauke Mehrtens
Acked-by: Ralf Baechle
Signed-off-by: John W. Linville -
The chip common and mips core have to be setup early in the boot
process to get the cpu clock.
bcma_bus_early_register() gets pointers to some space to store the core
data and searches for the chip common and mips core and initializes
chip common. After that was done and the kernel is out of early boot we
just have to run bcma_bus_register() and it will search for the other
cores, initialize and register them.
The cores are getting the same numbers as before.Acked-by: Rafał Miłecki
Signed-off-by: Hauke Mehrtens
Acked-by: Ralf Baechle
Signed-off-by: John W. Linville -
This makes it possible to use this code in some other method.
Acked-by: Rafał Miłecki
Signed-off-by: Hauke Mehrtens
Acked-by: Ralf Baechle
Signed-off-by: John W. Linville -
Move the parsing of the EEPROM data in scan function for one core into
an own function. Now we are able to use it in some other scan function
as well.Acked-by: Rafał Miłecki
Signed-off-by: Hauke Mehrtens
Acked-by: Ralf Baechle
Signed-off-by: John W. Linville
26 Jul, 2011
1 commit
-
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
fs: Merge split strings
treewide: fix potentially dangerous trailing ';' in #defined values/expressions
uwb: Fix misspelling of neighbourhood in comment
net, netfilter: Remove redundant goto in ebt_ulog_packet
trivial: don't touch files that are removed in the staging tree
lib/vsprintf: replace link to Draft by final RFC number
doc: Kconfig: `to be' -> `be'
doc: Kconfig: Typo: square -> squared
doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
drivers/net: static should be at beginning of declaration
drivers/media: static should be at beginning of declaration
drivers/i2c: static should be at beginning of declaration
XTENSA: static should be at beginning of declaration
SH: static should be at beginning of declaration
MIPS: static should be at beginning of declaration
ARM: static should be at beginning of declaration
rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
Update my e-mail address
PCIe ASPM: forcedly -> forcibly
gma500: push through device driver tree
...Fix up trivial conflicts:
- arch/arm/mach-ep93xx/dma-m2p.c (deleted)
- drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
- drivers/net/r8169.c (just context changes)
23 Jul, 2011
2 commits
-
…wireless-next-2.6 into for-davem
-
linux-next-20110722/drivers/bcma/driver_pci.c:175: error: 'SSB_PCICORE_BFL_NOPCI' undeclared (first use in this function)
Reported-by: Randy Dunlap
Signed-off-by: John W. Linville
22 Jul, 2011
1 commit
-
When using DMA, drivers need to pass special translation info to the
hardware.Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville
20 Jul, 2011
3 commits
-
Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville -
Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville -
Some cards do not use additional 0x30 offset for SPROM location. We do
not know the real condition for it yet, make it BCM4331 specific for
now.Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville
19 Jul, 2011
2 commits
-
SPROM rev 9 was discovered on 14e4:4331, it seems to have very similar
layout to rev 8 one. Use the same extracting function until we find some
differences.Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville -
We use value supplied via SPROM, or default 10:90 as fallback.
Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville
15 Jul, 2011
1 commit
-
…wireless-next-2.6 into for-davem
Conflicts:
net/bluetooth/l2cap_core.c
12 Jul, 2011
1 commit
-
The SoCs like the bcm4716 do not have a sprom on the bcma bus like a
pcie device. It stores the values in some partition on flash memory.
For ssb this informations are read out in the bcm47xx arch code,
something like that should also be implemented for bcma. Without this
patch bcma panics on SoCs.Signed-off-by: Hauke Mehrtens
Signed-off-by: John W. Linville
08 Jul, 2011
2 commits
-
…wireless-next-2.6 into for-davem
-
We must not init it like clientmode one, it would break device (tested
by Hauke on BCM4718). Add stub hostmode driver for now.Signed-off-by: Rafał Miłecki
Signed-off-by: Hauke Mehrtens
Signed-off-by: John W. Linville
07 Jul, 2011
1 commit
-
Signed-off-by: Michael Buesch
Signed-off-by: Jiri Kosina
01 Jul, 2011
1 commit
-
…wireless-next-2.6 into for-davem
28 Jun, 2011
1 commit
-
m68k allmodconfig:
drivers/bcma/main.c: In function ‘bcma_release_core_dev’:
drivers/bcma/main.c:68: error: implicit declaration of function ‘kfree’Signed-off-by: Geert Uytterhoeven
--
http://kisskb.ellerman.id.au/kisskb/buildresult/4243344/drivers/bcma/main.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
Signed-off-by: John W. Linville
25 Jun, 2011
1 commit
-
…wireless-next-2.6 into for-davem
Conflicts:
drivers/net/wireless/rtlwifi/pci.c
include/linux/netlink.h
21 Jun, 2011
3 commits
-
Function managing IRQs is needed for external drivers like b43.
On the other side we do not expect writing any hosts drivers outside of
bcma, so this is safe to do not export functions related to this.Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville -
Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville -
Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville
11 Jun, 2011
1 commit
-
In the brcm80211 driver we disable the 80211 core when the driver is
'down'. The bcma_core_disable() function exactly does the same as
our implementation so exporting this function makes sense.Cc: linux-wireless@vger.kernel.org
Cc: Rafal Milecki
Signed-off-by: Arend van Spriel
Signed-off-by: John W. Linville
09 Jun, 2011
1 commit
-
…wireless-next-2.6 into for-davem
04 Jun, 2011
1 commit
-
In case of BCMA cards SPROM is located in the ChipCommon core, it is
not mapped as separated host window. So far we have met only SPROMs rev
8.
SPROM layout seems to be the same as for SSB buses, so we decided to
share SPROM struct and some defines.
For now we extract MAC address only, this can be improved of course.Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville
02 Jun, 2011
1 commit
-
Signed-off-by: Rafał Miłecki
Signed-off-by: John W. Linville