15 Jun, 2009
3 commits
-
probe functions should be __devinit
initialization functions should be __initSigned-off-by: Geert Uytterhoeven
Cc: Geoff Levand
Acked-by: Geoff Levand
Signed-off-by: Benjamin Herrenschmidt -
Signed-off-by: Geert Uytterhoeven
Cc: linux-fbdev-devel@lists.sourceforge.net
Cc: Jim Paris
Cc: Jens Axboe
Signed-off-by: Benjamin Herrenschmidt -
Signed-off-by: Geert Uytterhoeven
Cc: linux-fbdev-devel@lists.sourceforge.net
Signed-off-by: Benjamin Herrenschmidt
11 Mar, 2009
1 commit
-
Change the ps3av_auto_videomode() mode id argument type from unsigned to
signed so a negative id can be detected and reported as an -EINVAL failure.Signed-off-by: Roel Kluin
Signed-off-by: Geoff Levand
Signed-off-by: Benjamin Herrenschmidt
16 Jan, 2009
2 commits
-
Also some min -> mint_t conversion.
Signed-off-by: Stephen Rothwell
Acked-by: Geoff Levand
Signed-off-by: Benjamin Herrenschmidt -
We just fix up the reference parameters as the others are dealt with by
arithmetic promotion rules and don't cause warnings.This removes warnings like this:
arch/powerpc/platforms/ps3/interrupt.c:327: warning: passing argument 1 of 'lv1_construct_event_receive_port' from incompatible pointer type
Also, these:
drivers/ps3/ps3-vuart.c:462: warning: passing argument 4 of 'ps3_vuart_raw_read' from incompatible pointer type
drivers/ps3/ps3-vuart.c:592: warning: passing argument 4 of 'ps3_vuart_raw_read' from incompatible pointer typeSigned-off-by: Stephen Rothwell
Acked-by: Geoff Levand
Signed-off-by: Benjamin Herrenschmidt
19 Nov, 2008
1 commit
-
Introduce ps3_gpu_mutex to synchronizes GPU-related operations, like:
- invoking the L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT command using the
lv1_gpu_context_attribute() hypervisor call,
- handling the PS3AV_CID_AVB_PARAM packet in the PS3 A/V Settings driver.Signed-off-by: Geert Uytterhoeven
Signed-off-by: Geoff Levand
Signed-off-by: Paul Mackerras
05 Nov, 2008
1 commit
-
Compiling with CONFIG_SMP = n and CONFIG_PS3_LPM != n gives this error:
drivers/ps3/ps3-lpm.c:838: error: implicit declaration of function 'get_hard_smp_processor_id'
This fixes it. We have to include rather than
because the UP definition of get_hard_smp_processor_id()
is in , and only includes if
CONFIG_SMP = y.Signed-off-by: Alexey Dobriyan
Acked-by: Geoff Levand
Signed-off-by: Paul Mackerras
20 Oct, 2008
2 commits
-
Add support for the channel status bit setting so that non-PCM
data stream can be sent (i.e. pass-through) via SPDIF/HDMI.Signed-off-by: Masakazu Mokuno
Acked-by: Geert Uytterhoeven
Signed-off-by: Takashi Iwai -
Add support for muting the analog output so that it does not
play noises while non-PCM data is played.Signed-off-by: Masakazu Mokuno
Signed-off-by: Takashi Iwai
02 May, 2008
2 commits
-
Other OS wakeup is not supported from the IR controller,
the bluetooth controller nor the RTC. Remove references
to these in the PS3 sys-manager source.Signed-off-by: Geoff Levand
Signed-off-by: Paul Mackerras -
Add an include statement for get_tb().
Signed-off-by: FUJITA Tomonori
Signed-off-by: Geoff Levand
Signed-off-by: Paul Mackerras
01 Apr, 2008
2 commits
-
Add Wake-on-LAN support to the PS3 system-manager. Other OS WOL
support was introduced in PS3 system firmware 2.20.Signed-off-by: Geoff Levand
Signed-off-by: Paul Mackerras -
PS3 save power on halt:
- Replace infinite busy loops by smarter loops calling
lv1_pause() to save power.
- Add ps3_halt() and ps3_sys_manager_halt().
- Add __noreturn annotations.Signed-off-by: Geert Uytterhoeven
Signed-off-by: Geoff Levand
Signed-off-by: Paul Mackerras
14 Feb, 2008
5 commits
-
PS3 firmware 1.94 added the source of power and reset events to the
payload of the system manager POWER_PRESSED and RESET_PRESSED events.Signed-off-by: Geoff Levand
Signed-off-by: Paul Mackerras -
General code cleanups for PS3 system-manager:
o Move all MODULE_ macros to bottom.
o Correct PS3_SM_WAKE_P_O_R value.
o Enhance comment on wakeup source values.Signed-off-by: Geoff Levand
Signed-off-by: Paul Mackerras -
The PS3 Other OS boot flag is not checked when an LPAR reboot is done,
so the ps3-boot-game-os utility fails to reboot the system into the
Game OS. This fix changes the PS3 restart handler from requesting an
PS3_SM_NEXT_OP_LPAR_REBOOT to requesting an PS3_SM_NEXT_OP_SYS_REBOOT.Signed-off-by: Geoff Levand
Signed-off-by: Paul Mackerras -
ps3_read_pm (pm_interval) should return an actual HW register value
because the pm_interval register is a counter register.
This removes the shadow pm_interval register.Signed-off-by: Takashi Yamamoto
Signed-off-by: Geoff Levand
Signed-off-by: Paul Mackerras -
Fix the ps3_set_bookmark() routine of the PS3 logical performance
monitor driver.To properly set a performance monitor bookmark the Cell processor
requires no instruction branches near the setting of the bookmark
SPR. Testing showed that the use of the db10cyc instruction did
not work correctly. This change replaces the db10cyc instruction
with 10 nop instructions.Signed-off-by: Takashi Yamamoto
Signed-off-by: Geoff Levand
Signed-off-by: Paul Mackerras
07 Feb, 2008
2 commits
-
Use symbolic names for video modes
Signed-off-by: Geert Uytterhoeven
Cc: "Antonino A. Daplas"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
ps3av_get_scanmode() and ps3av_get_refresh_rate() are unused, so remove them
Signed-off-by: Geert Uytterhoeven
Cc: "Antonino A. Daplas"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
25 Jan, 2008
4 commits
-
A general housekeeping change of the PS3 vuart variable
vuart_bus_priv.probe_mutex from semaphore to mutex.Signed-off-by: Geoff Levand
Signed-off-by: Paul Mackerras -
Add PS3 logical performance monitor (lpm) device driver.
The PS3's LV1 hypervisor provides a Logical Performance Monitor that
abstracts the Cell processor's performance monitor features for use
by guest operating systems.Signed-off-by: Takashi Yamamoto
Signed-off-by: Geoff Levand
Signed-off-by: Paul Mackerras -
Cleanup coding errors in drivers/ps3/ps3-vuart.c as reported by
checkpatch.Signed-off-by: Geert Uytterhoeven
Signed-off-by: Geoff Levand
Signed-off-by: Paul Mackerras -
Cleanup coding errors in drivers/ps3/ps3-sys-manager.c as reported
by checkpatch.Signed-off-by: Geert Uytterhoeven
Signed-off-by: Geoff Levand
Signed-off-by: Paul Mackerras
24 Dec, 2007
1 commit
-
This stray down would cause a permanent sleep which doesn't seem correct.
The other uses of this semaphore appear fairly mutex like it's even
initialized with init_MUTEX() .. So here a patch for removing this one
down().Signed-off-by: Geoff Levand
Signed-off-by: Daniel Walker
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
30 Nov, 2007
1 commit
-
- vuart.ko -> ps3-vuart.ko
- sys-manager.ko -> ps3-sys-manager.koSigned-off-by: Geert Uytterhoeven
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
20 Oct, 2007
2 commits
-
remove asm/bitops.h includes
including asm/bitops directly may cause compile errors. don't include it
and include linux/bitops instead. next patch will deny including asm header
directly.Cc: Adrian Bunk
Signed-off-by: Jiri Slaby
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Remove the `clear_50' and `clear_vesa' fields of struct
ps3av_monitor_quirk, as they're currently unused. We can always re-add
them when we really need them.Signed-off-by: Geert Uytterhoeven
Cc: "Antonino A. Daplas"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
19 Oct, 2007
1 commit
-
Found these while looking at printk uses.
Add missing newlines to dev_ uses
Add missing KERN_ prefixes to multiline dev_s
Fixed a wierd->weird spelling typo
Added a newline to a printkSigned-off-by: Joe Perches
Cc: "Luck, Tony"
Cc: Jens Axboe
Cc: Mark M. Hoffman
Cc: Roland Dreier
Cc: Tilman Schmidt
Cc: David Woodhouse
Cc: Jeff Garzik
Cc: Stephen Hemminger
Cc: Greg KH
Cc: Jeremy Fitzhardinge
Cc: Geert Uytterhoeven
Cc: Alessandro Zummo
Cc: David Brownell
Cc: James Smart
Cc: Andrew Vasquez
Cc: "Antonino A. Daplas"
Cc: Evgeniy Polyakov
Cc: Russell King
Cc: Jaroslav Kysela
Cc: Takashi Iwai
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
17 Oct, 2007
10 commits
-
Default to the 480p video mode on DVI-D and HDMI displays if `video=safe' is
passed on the kernel command line.This is intended to be used by `kboot'-style boot loaders (i.e. first-stage
kernels) for the PS3, to provide a failsafe video mode.Signed-off-by: Geert Uytterhoeven
Cc: "Antonino A. Daplas"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
don't distinguish between `boot' and `non-boot' autodetection now the
autodetection code has been improvedSigned-off-by: Geert Uytterhoeven
Signed-off-by: Antonino Daplas
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
remove unused ps3av_set_mode()
Signed-off-by: Geert Uytterhoeven
Signed-off-by: Antonino Daplas
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
add a quirk database for broken monitors where the `best' advertised
video mode doesn't workSigned-off-by: Geert Uytterhoeven
Signed-off-by: Antonino Daplas
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
add autodetection for VESA modes
Signed-off-by: Geert Uytterhoeven
Signed-off-by: Antonino Daplas
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
treat DVI-D monitors like HDMI monitors when autodetecting the best video mode
Signed-off-by: Geert Uytterhoeven
Signed-off-by: Antonino Daplas
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
It doesn't make much sense to use the PS3AV_CMD_VIDEO_VID_* values in the
autodetection code, just to convert them to PS3 video mode ids afterwards.Signed-off-by: Geert Uytterhoeven
Signed-off-by: Antonino Daplas
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
ps3av: eliminate PS3AV_DEBUG
- Move ps3av_cmd_av_monitor_info_dump from ps3av_cmd.c to ps3av.c, as
it's
used there only
- Integrate ps3av_cmd_av_hw_conf_dump() into its sole user
- Use pr_debug() for printing debug infoSigned-off-by: Geert Uytterhoeven
Signed-off-by: Antonino Daplas
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
ps3av: eliminate unneeded temporary variables
Signed-off-by: Geert Uytterhoeven
Signed-off-by: Antonino Daplas
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Fix the black and white stripes issue with WUXGA monitor via HDMI.
It seems that when we use a VESA resolution from boot up, the AV settings
driver could not be initialized correctly. In that case we need a dummy
packet before VESA setting.[Geert] Refactored to reduce code duplication.
Signed-off-by: Geert Uytterhoeven
CC: Geoff Levand
Signed-off-by: Antonino Daplas
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
