20 Jan, 2021
2 commits
-
Changes in 5.10.9
btrfs: reloc: fix wrong file extent type check to avoid false ENOENT
btrfs: prevent NULL pointer dereference in extent_io_tree_panic
ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines
ALSA: doc: Fix reference to mixart.rst
ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad X395
ASoC: dapm: remove widget from dirty list on free
x86/hyperv: check cpu mask after interrupt has been disabled
drm/amdgpu: add green_sardine device id (v2)
drm/amdgpu: fix DRM_INFO flood if display core is not supported (bug 210921)
Revert "drm/amd/display: Fixed Intermittent blue screen on OLED panel"
drm/amdgpu: add new device id for Renior
drm/i915: Allow the sysadmin to override security mitigations
drm/i915/gt: Limit VFE threads based on GT
drm/i915/backlight: fix CPU mode backlight takeover on LPT
drm/bridge: sii902x: Refactor init code into separate function
dt-bindings: display: sii902x: Add supply bindings
drm/bridge: sii902x: Enable I/O and core VCC supplies if present
tracing/kprobes: Do the notrace functions check without kprobes on ftrace
tools/bootconfig: Add tracing_on support to helper scripts
ext4: use IS_ERR instead of IS_ERR_OR_NULL and set inode null when IS_ERR
ext4: fix wrong list_splice in ext4_fc_cleanup
ext4: fix bug for rename with RENAME_WHITEOUT
cifs: check pointer before freeing
cifs: fix interrupted close commands
riscv: Drop a duplicated PAGE_KERNEL_EXEC
riscv: return -ENOSYS for syscall -1
riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL
riscv: Fix KASAN memory mapping.
mips: fix Section mismatch in reference
mips: lib: uncached: fix non-standard usage of variable 'sp'
MIPS: boot: Fix unaligned access with CONFIG_MIPS_RAW_APPENDED_DTB
MIPS: Fix malformed NT_FILE and NT_SIGINFO in 32bit coredumps
MIPS: relocatable: fix possible boot hangup with KASLR enabled
RDMA/ocrdma: Fix use after free in ocrdma_dealloc_ucontext_pd()
ACPI: scan: Harden acpi_device_add() against device ID overflows
xen/privcmd: allow fetching resource sizes
compiler.h: Raise minimum version of GCC to 5.1 for arm64
mm/vmalloc.c: fix potential memory leak
mm/hugetlb: fix potential missing huge page size info
mm/process_vm_access.c: include compat.h
dm raid: fix discard limits for raid1
dm snapshot: flush merged data before committing metadata
dm integrity: fix flush with external metadata device
dm integrity: fix the maximum number of arguments
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq
dm crypt: do not wait for backlogged crypto request completion in softirq
dm crypt: do not call bio_endio() from the dm-crypt tasklet
dm crypt: defer decryption to a tasklet if interrupts disabled
stmmac: intel: change all EHL/TGL to auto detect phy addr
r8152: Add Lenovo Powered USB-C Travel Hub
btrfs: tree-checker: check if chunk item end overflows
ext4: don't leak old mountpoint samples
io_uring: don't take files/mm for a dead task
io_uring: drop mm and files after task_work_run
ARC: build: remove non-existing bootpImage from KBUILD_IMAGE
ARC: build: add uImage.lzma to the top-level target
ARC: build: add boot_targets to PHONY
ARC: build: move symlink creation to arch/arc/Makefile to avoid race
ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875
ath11k: fix crash caused by NULL rx_channel
netfilter: ipset: fixes possible oops in mtype_resize
ath11k: qmi: try to allocate a big block of DMA memory first
btrfs: fix async discard stall
btrfs: merge critical sections of discard lock in workfn
btrfs: fix transaction leak and crash after RO remount caused by qgroup rescan
regulator: bd718x7: Add enable times
ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pram
ARM: dts: ux500/golden: Set display max brightness
habanalabs: adjust pci controller init to new firmware
habanalabs/gaudi: retry loading TPC f/w on -EINTR
habanalabs: register to pci shutdown callback
staging: spmi: hisi-spmi-controller: Fix some error handling paths
spi: altera: fix return value for altera_spi_txrx()
habanalabs: Fix memleak in hl_device_reset
hwmon: (pwm-fan) Ensure that calculation doesn't discard big period values
lib/raid6: Let $(UNROLL) rules work with macOS userland
kconfig: remove 'kvmconfig' and 'xenconfig' shorthands
spi: fix the divide by 0 error when calculating xfer waiting time
io_uring: drop file refs after task cancel
bfq: Fix computation of shallow depth
arch/arc: add copy_user_page() to to fix build error on ARC
misdn: dsp: select CONFIG_BITREVERSE
net: ethernet: fs_enet: Add missing MODULE_LICENSE
selftests: fix the return value for UDP GRO test
nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN
nvme: avoid possible double fetch in handling CQE
nvmet-rdma: Fix list_del corruption on queue establishment failure
drm/amd/display: fix sysfs amdgpu_current_backlight_pwm NULL pointer issue
drm/amdgpu: fix a GPU hang issue when remove device
drm/amd/pm: fix the failure when change power profile for renoir
drm/amdgpu: fix potential memory leak during navi12 deinitialization
usb: typec: Fix copy paste error for NVIDIA alt-mode description
iommu/vt-d: Fix lockdep splat in sva bind()/unbind()
ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI
drm/msm: Call msm_init_vram before binding the gpu
ARM: picoxcell: fix missing interrupt-parent properties
poll: fix performance regression due to out-of-line __put_user()
rcu-tasks: Move RCU-tasks initialization to before early_initcall()
bpf: Simplify task_file_seq_get_next()
bpf: Save correct stopping point in file seq iteration
x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling
cfg80211: select CONFIG_CRC32
nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt context
iommu/vt-d: Update domain geometry in iommu_ops.at(de)tach_dev
net/mlx5e: CT: Use per flow counter when CT flow accounting is enabled
net/mlx5: Fix passing zero to 'PTR_ERR'
net/mlx5: E-Switch, fix changing vf VLANID
blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED
mm: fix clear_refs_write locking
mm: don't play games with pinned pages in clear_page_refs
mm: don't put pinned pages into the swap cache
perf intel-pt: Fix 'CPU too large' error
dump_common_audit_data(): fix racy accesses to ->d_name
ASoC: meson: axg-tdm-interface: fix loopback
ASoC: meson: axg-tdmin: fix axg skew offset
ASoC: Intel: fix error code cnl_set_dsp_D0()
nvmet-rdma: Fix NULL deref when setting pi_enable and traddr INADDR_ANY
nvme: don't intialize hwmon for discovery controllers
nvme-tcp: fix possible data corruption with bio merges
nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT
NFS4: Fix use-after-free in trace_event_raw_event_nfs4_set_lock
pNFS: We want return-on-close to complete when evicting the inode
pNFS: Mark layout for return if return-on-close was not sent
pNFS: Stricter ordering of layoutget and layoutreturn
NFS: Adjust fs_context error logging
NFS/pNFS: Don't call pnfs_free_bucket_lseg() before removing the request
NFS/pNFS: Don't leak DS commits in pnfs_generic_retry_commit()
NFS/pNFS: Fix a leak of the layout 'plh_outstanding' counter
NFS: nfs_delegation_find_inode_server must first reference the superblock
NFS: nfs_igrab_and_active must first reference the superblock
scsi: ufs: Fix possible power drain during system suspend
ext4: fix superblock checksum failure when setting password salt
RDMA/restrack: Don't treat as an error allocation ID wrapping
RDMA/usnic: Fix memleak in find_free_vf_and_create_qp_grp
bnxt_en: Improve stats context resource accounting with RDMA driver loaded.
RDMA/mlx5: Fix wrong free of blue flame register on error
IB/mlx5: Fix error unwinding when set_has_smi_cap fails
umount(2): move the flag validity checks first
dm zoned: select CONFIG_CRC32
drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence
drm/i915/icl: Fix initing the DSI DSC power refcount during HW readout
drm/i915/gt: Restore clear-residual mitigations for Ivybridge, Baytrail
mm, slub: consider rest of partial list if acquire_slab() fails
riscv: Trace irq on only interrupt is enabled
iommu/vt-d: Fix unaligned addresses for intel_flush_svm_range_dev()
net: sunrpc: interpret the return value of kstrtou32 correctly
selftests: netfilter: Pass family parameter "-f" to conntrack tool
dm: eliminate potential source of excessive kernel log noise
ALSA: fireface: Fix integer overflow in transmit_midi_msg()
ALSA: firewire-tascam: Fix integer overflow in midi_port_work()
netfilter: conntrack: fix reading nf_conntrack_buckets
netfilter: nf_nat: Fix memleak in nf_nat_init
Linux 5.10.9Signed-off-by: Greg Kroah-Hartman
Change-Id: I609e501511889081e03d2d18ee7e1be95406f396 -
[ Upstream commit 152a8a6c017bfdeda7f6d052fbc6e151891bd9b6 ]
Without crc32 support, this fails to link:
arm-linux-gnueabi-ld: net/wireless/scan.o: in function `cfg80211_scan_6ghz':
scan.c:(.text+0x928): undefined reference to `crc32_le'Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Arnd Bergmann
Signed-off-by: David S. Miller
Signed-off-by: Sasha Levin
15 Jan, 2021
1 commit
-
Instead of casting callback functions to type iw_handler, which trips
indirect call checking with Clang's Control-Flow Integrity (CFI), add
stub functions with the correct function type for the callbacks.Bug: 145210207
Change-Id: Ief26496449ec985d600dd06b5e190dd21bf8eb4a
Link: https://lore.kernel.org/lkml/20201117205902.405316-1-samitolvanen@google.com/
Reported-by: Sedat Dilek
Signed-off-by: Sami Tolvanen
30 Dec, 2020
1 commit
-
[ Upstream commit ba5c25236bc3d399df82ebe923490ea8d2d35cf2 ]
The for-loop iterates with a u8 loop counter and compares this
with the loop upper limit of request->n_ssids which is an int type.
There is a potential infinite loop if n_ssids is larger than the
u8 loop counter, so fix this by making the loop counter an int.Addresses-Coverity: ("Infinite loop")
Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Colin Ian King
Link: https://lore.kernel.org/r/20201029222407.390218-1-colin.king@canonical.com
Signed-off-by: Johannes Berg
Signed-off-by: Sasha Levin
26 Dec, 2020
1 commit
-
commit 2d9463083ce92636a1bdd3e30d1236e3e95d859e upstream.
syzbot discovered a bug in which an OOB access was being made because
an unsuitable key_idx value was wrongly considered to be acceptable
while deleting a key in nl80211_del_key().Since we don't know the cipher at the time of deletion, if
cfg80211_validate_key_settings() were to be called directly in
nl80211_del_key(), even valid keys would be wrongly determined invalid,
and deletion wouldn't occur correctly.
For this reason, a new function - cfg80211_valid_key_idx(), has been
created, to determine if the key_idx value provided is valid or not.
cfg80211_valid_key_idx() is directly called in 2 places -
nl80211_del_key(), and cfg80211_validate_key_settings().Reported-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com
Tested-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com
Suggested-by: Johannes Berg
Signed-off-by: Anant Thazhemadam
Link: https://lore.kernel.org/r/20201204215825.129879-1-anant.thazhemadam@gmail.com
Cc: stable@vger.kernel.org
[also disallow IGTK key IDs if no IGTK cipher is supported]
Signed-off-by: Johannes Berg
Signed-off-by: Greg Kroah-Hartman
04 Dec, 2020
1 commit
-
In case we have old supplicant, the akm field is uninitialized.
Signed-off-by: Sara Sharon
Signed-off-by: Luca Coelho
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.930f0ab7ebee.Ic546e384efab3f4a89f318eafddc3eb7d556aecb@changeid
Signed-off-by: Johannes Berg
30 Oct, 2020
2 commits
-
Fix follow warning:
[net/wireless/reg.c:3619]: (warning) %d in format string (no. 2)
requires 'int' but the argument type is 'unsigned int'.Reported-by: Hulk Robot
Signed-off-by: Ye Bin
Link: https://lore.kernel.org/r/20201009070215.63695-1-yebin10@huawei.com
Signed-off-by: Johannes Berg -
There's a race condition in the netdev registration in that
NETDEV_REGISTER actually happens after the netdev is available,
and so if we initialize things only there, we might get called
with an uninitialized wdev through nl80211 - not using a wdev
but using a netdev interface index.I found this while looking into a syzbot report, but it doesn't
really seem to be related, and unfortunately there's no repro
for it (yet). I can't (yet) explain how it managed to get into
cfg80211_release_pmsr() from nl80211_netlink_notify() without
the wdev having been initialized, as the latter only iterates
the wdevs that are linked into the rdev, which even without the
change here happened after init.However, looking at this, it seems fairly clear that the init
needs to be done earlier, otherwise we might even re-init on a
netns move, when data might still be pending.Signed-off-by: Johannes Berg
Link: https://lore.kernel.org/r/20201009135821.fdcbba3aad65.Ie9201d91dbcb7da32318812effdc1561aeaf4cdc@changeid
Signed-off-by: Johannes Berg
11 Oct, 2020
1 commit
-
…m/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
A handful of changes:
* fixes for the recent S1G work
* a docbook build time improvement
* API to pass beacon rate to lower-level driver
====================Signed-off-by: Jakub Kicinski <kuba@kernel.org>
09 Oct, 2020
1 commit
-
Small conflict around locking in rxrpc_process_event() -
channel_lock moved to bundle in next, while state lock
needs _bh() from net.Signed-off-by: Jakub Kicinski
08 Oct, 2020
2 commits
-
In nl80211_parse_key(), key.idx is first initialized as -1.
If this value of key.idx remains unmodified and gets returned, and
nl80211_key_allowed() also returns 0, then rdev_del_key() gets called
with key.idx = -1.
This causes an out-of-bounds array access.Handle this issue by checking if the value of key.idx after
nl80211_parse_key() is called and return -EINVAL if key.idx < 0.Cc: stable@vger.kernel.org
Reported-by: syzbot+b1bb342d1d097516cbda@syzkaller.appspotmail.com
Tested-by: syzbot+b1bb342d1d097516cbda@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam
Link: https://lore.kernel.org/r/20201007035401.9522-1-anant.thazhemadam@gmail.com
Signed-off-by: Johannes Berg -
As discovered by syzbot, cfg80211 was accepting S1G
channel widths on non-S1G bands. Add a check for this, and
consolidate the 1MHz frequency check as it ends up being a
subset of the others.Reported-by: syzbot+92715a0eccd6c881bc32@syzkaller.appspotmail.com
Fixes: 11b34737b18a ("nl80211: support setting S1G channels")
Signed-off-by: Thomas Pedersen
Link: https://lore.kernel.org/r/20201005165122.17583-1-thomas@adapt-ip.com
Signed-off-by: Johannes Berg
03 Oct, 2020
1 commit
-
Bulk of the genetlink users can use smaller ops, move them.
Signed-off-by: Jakub Kicinski
Reviewed-by: Johannes Berg
Signed-off-by: David S. Miller
02 Oct, 2020
2 commits
-
When dumping wiphy information, we try to split the data into
many submessages, but for old userspace we still support the
old mode where this doesn't happen.However, in this case we were not resetting our state correctly
and dumping multiple messages for each wiphy, which would have
broken such older userspace.This was broken pretty much immediately afterwards because it
only worked in the original commit where non-split dumps didn't
have any more data than split dumps...Fixes: fe1abafd942f ("nl80211: re-add channel width and extended capa advertising")
Signed-off-by: Johannes Berg
Link: https://lore.kernel.org/r/20200928130717.3e6d9c6bada2.Ie0f151a8d0d00a8e1e18f6a8c9244dd02496af67@changeid
Signed-off-by: Johannes Berg -
When wiphy dumps cannot be split, such as in events or with
older userspace that doesn't support it, the size can today
be too big.Reduce it, by doing two things:
1) remove data that couldn't have been present before the
split capability was introduced since it's new, such as
HE capabilities2) as suggested by Martin Willi, remove management frame
subtypes from the split dumps, as just (1) isn't even
enough due to other new code capabilities. This is fine
as old consumers (really just wpa_supplicant) didn't
check this data before they got support for split dumps.Reported-by: Martin Willi
Suggested-by: Martin Willi
Signed-off-by: Johannes Berg
Tested-by: Martin Willi
Link: https://lore.kernel.org/r/20200928130655.53bce7873164.I71f06c9a221cd0630429a1a56eeae68a13beca61@changeid
Signed-off-by: Johannes Berg
28 Sep, 2020
10 commits
-
Allow the user to configure below Spatial Reuse Parameter Set element.
* Non-SRG OBSS PD Max Offset
* SRG BSS Color Bitmap
* SRG Partial BSSID BitmapSigned-off-by: Rajkumar Manoharan
Link: https://lore.kernel.org/r/1601278091-20313-2-git-send-email-rmanohar@codeaurora.org
Signed-off-by: Johannes Berg -
The SRG min and max offset won't present when SRG Information Present of
SR control field of Spatial Reuse Parameter Set element set to 0. Per
spec. IEEE802.11ax D7.0, SRG OBSS PD Min Offset ≤ SRG OBSS PD Max
Offset. Hence fix the constrain check to allow same values in both
offset and also call appropriate nla_get function to read the values.Fixes: 796e90f42b7e ("cfg80211: add support for parsing OBBS_PD attributes")
Signed-off-by: Rajkumar Manoharan
Link: https://lore.kernel.org/r/1601278091-20313-1-git-send-email-rmanohar@codeaurora.org
Signed-off-by: Johannes Berg -
The the __freq_reg_info() never returns NULL and the callers don't check
for NULL. This initialization to set "reg_rule = NULL;" is just there
to make GCC happy but it's not required in current GCCs.The problem is that Smatch sees the initialization and concludes that
this function can return NULL so it complains that the callers are not
checking for it.Smatch used to be able to parse this correctly but we recently changed
the code from:- for (bw = MHZ_TO_KHZ(20); bw >= min_bw; bw = bw / 2) {
+ for (bw = MHZ_TO_KHZ(bws[i]); bw >= min_bw; bw = MHZ_TO_KHZ(bws[i--])) {Originally Smatch used to understand that this code always iterates
through the loop once, but the change from "MHZ_TO_KHZ(20)" to
"MHZ_TO_KHZ(bws[i])" is too complicated for Smatch.Signed-off-by: Dan Carpenter
Link: https://lore.kernel.org/r/20200923084203.GC1454948@mwanda
Signed-off-by: Johannes Berg -
Recently channels gained a potential frequency offset, so
include this in the per-channel survey info.Signed-off-by: Thomas Pedersen
Link: https://lore.kernel.org/r/20200922022818.15855-16-thomas@adapt-ip.com
[add the offset only if non-zero]
Signed-off-by: Johannes Berg -
The sending STA type is implicit based on beacon or probe
response content. If sending STA was an S1G STA, adjust
the Information Element location accordingly.Signed-off-by: Thomas Pedersen
Link: https://lore.kernel.org/r/20200922022818.15855-9-thomas@adapt-ip.com
Signed-off-by: Johannes Berg -
Extract the BSS primary channel from the S1G Operation
element.Signed-off-by: Thomas Pedersen
Link: https://lore.kernel.org/r/20200922022818.15855-7-thomas@adapt-ip.com
[remove the goto bits]
Signed-off-by: Johannes Berg -
The S1G beacon is an extension frame as opposed to
management frame for the regular beacon. This means we may
have to occasionally cast the frame buffer to a different
header type. Luckily this isn't too bad as scan results
mostly only care about the IEs.Signed-off-by: Thomas Pedersen
Link: https://lore.kernel.org/r/20200922022818.15855-6-thomas@adapt-ip.com
Signed-off-by: Johannes Berg -
NL80211_ATTR_S1G_CAPABILITY can be passed along with
NL80211_ATTR_S1G_CAPABILITY_MASK to NL80211_CMD_ASSOCIATE
to indicate S1G capabilities which should override the
hardware capabilities in eg. the association request.Signed-off-by: Thomas Pedersen
Link: https://lore.kernel.org/r/20200922022818.15855-4-thomas@adapt-ip.com
[johannes: always require both attributes together, commit message]
Signed-off-by: Johannes Berg -
The vendor namespaces argument isn't described here, add it.
Signed-off-by: Johannes Berg
Link: https://lore.kernel.org/r/20200924192511.2bf5cc761d3a.I9b4579ab3eebe3d7889b59eea8fa50d683611bab@changeid
Signed-off-by: Johannes Berg -
Support 6 GHz scanning, by
* a new scan flag to scan for colocated BSSes advertised
by (and found) APs on 2.4 & 5 GHz
* doing the necessary reduced neighbor report parsing for
this, to find them
* adding the ability to split the scan request in case the
device by itself cannot support this.Also add some necessary bits in mac80211 to not break with
these changes.Signed-off-by: Tova Mussai
Signed-off-by: Johannes Berg
Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid
Signed-off-by: Johannes Berg
23 Sep, 2020
1 commit
-
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.Signed-off-by: David S. Miller
18 Sep, 2020
9 commits
-
This patch adds new attributes to support unsolicited broadcast
probe response transmission used for in-band
discovery in 6GHz band (IEEE P802.11ax/D6.0 26.17.2.3.2, AP behavior for
fast passive scanning).
The new attribute, NL80211_ATTR_UNSOL_BCAST_PROBE_RESP, is nested which
supports following parameters:
(1) NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT - Packet interval
(2) NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL - Template dataSigned-off-by: Aloka Dixit
Link: https://lore.kernel.org/r/010101747a946698-aac263ae-2ed3-4dab-9590-0bc7131214e1-000000@us-west-2.amazonses.com
Signed-off-by: Johannes Berg -
FILS discovery attribute, NL80211_ATTR_FILS_DISCOVERY, is nested which
supports following parameters as given in IEEE Std 802.11ai-2016,
Annex C.3 MIB detail:
(1) NL80211_FILS_DISCOVERY_ATTR_INT_MIN - Minimum packet interval
(2) NL80211_FILS_DISCOVERY_ATTR_INT_MAX - Maximum packet interval
(3) NL80211_FILS_DISCOVERY_ATTR_TMPL - Template dataSigned-off-by: Aloka Dixit
Link: https://lore.kernel.org/r/20200805011838.28166-2-alokad@codeaurora.org
[fix attribute and other names, use NLA_RANGE(), use policy only once]
Link: https://lore.kernel.org/r/010101747a7b38a8-306f06b2-9061-4baf-81c1-054a42a18e22-000000@us-west-2.amazonses.com
Signed-off-by: Johannes Berg -
S1G channels have a single width defined per frequency, so
derive it from the channel flags with
ieee80211_s1g_channel_width().Also support setting an S1G channel where control frequency may
differ from operating, and add some basic validation to
ensure the control channel is with the operating.Signed-off-by: Thomas Pedersen
Link: https://lore.kernel.org/r/20200908190323.15814-6-thomas@adapt-ip.com
Signed-off-by: Johannes Berg -
The S1G beacon has a different header size than regular
beacons, so adjust the beacon head validator.Signed-off-by: Thomas Pedersen
Link: https://lore.kernel.org/r/20200908190323.15814-5-thomas@adapt-ip.com
Signed-off-by: Johannes Berg -
S1G channels have a minimum bandwidth of 1Mhz, and there
is a 1:1 mapping of allowed bandwidth to channel number.Signed-off-by: Thomas Pedersen
Link: https://lore.kernel.org/r/20200908190323.15814-4-thomas@adapt-ip.com
Signed-off-by: Johannes Berg -
S1G supports 5 channel widths: 1, 2, 4, 8, and 16. One
channel width is allowed per frequency in each operating
class, so it makes more sense to advertise the specific
channel width allowed.Signed-off-by: Thomas Pedersen
Link: https://lore.kernel.org/r/20200908190323.15814-3-thomas@adapt-ip.com
Signed-off-by: Johannes Berg -
There is no caller in tree any more.
Signed-off-by: YueHaibing
Link: https://lore.kernel.org/r/20200829115506.17828-1-yuehaibing@huawei.com
Signed-off-by: Johannes Berg -
We shouldn't accept any channels bigger than 233, fix that.
Reported-by: Amar
Fixes: d1a1646c0de7 ("cfg80211: adapt to new channelization of the 6GHz band")
Signed-off-by: Johannes Berg
Link: https://lore.kernel.org/r/20200917115222.312ba6f1d461.I3a8c8fbcc3cc019814fd9cd0aced7eb591626136@changeid
Signed-off-by: Johannes Berg -
When LIB80211_CRYPT_CCMP is enabled and CRYPTO is disabled, it results in unmet
direct dependencies config warning. The reason is that LIB80211_CRYPT_CCMP
selects CRYPTO_AES and CRYPTO_CCM, which are subordinate to CRYPTO. This is
reproducible with CRYPTO disabled and R8188EU enabled, where R8188EU selects
LIB80211_CRYPT_CCMP but does not select or depend on CRYPTO.Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: a11e2f85481c ("lib80211: use crypto API ccm(aes) transform for CCMP processing")
Signed-off-by: Necip Fazil Yildiran
Link: https://lore.kernel.org/r/20200909095452.3080-1-fazilyildiran@gmail.com
Signed-off-by: Johannes Berg
05 Sep, 2020
1 commit
-
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).Signed-off-by: Jakub Kicinski
04 Sep, 2020
1 commit
-
Pull networking fixes from David Miller:
1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
Kivilinna.2) Fix loss of RTT samples in rxrpc, from David Howells.
3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.
4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.
5) We disable BH for too lokng in sctp_get_port_local(), add a
cond_resched() here as well, from Xin Long.6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.
7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
Yonghong Song.8) Missing of_node_put() in mt7530 DSA driver, from Sumera
Priyadarsini.9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.
10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.
11) Memory leak in rxkad_verify_response, from Dinghao Liu.
12) In tipc, don't use smp_processor_id() in preemptible context. From
Tuong Lien.13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.
14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.
15) Fix ABI mismatch between driver and firmware in nfp, from Louis
Peens.* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
net/smc: fix sock refcounting in case of termination
net/smc: reset sndbuf_desc if freed
net/smc: set rx_off for SMCR explicitly
net/smc: fix toleration of fake add_link messages
tg3: Fix soft lockup when tg3_reset_task() fails.
doc: net: dsa: Fix typo in config code sample
net: dp83867: Fix WoL SecureOn password
nfp: flower: fix ABI mismatch between driver and firmware
tipc: fix shutdown() of connectionless socket
ipv6: Fix sysctl max for fib_multipath_hash_policy
drivers/net/wan/hdlc: Change the default of hard_header_len to 0
net: gemini: Fix another missing clk_disable_unprepare() in probe
net: bcmgenet: fix mask check in bcmgenet_validate_flow()
amd-xgbe: Add support for new port mode
net: usb: dm9601: Add USB ID of Keenetic Plus DSL
vhost: fix typo in error message
net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
pktgen: fix error message with wrong function name
net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
cxgb4: fix thermal zone device registration
...
27 Aug, 2020
3 commits
-
Let drivers advertise support for AP-mode SAE authentication offload
with a new NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag.Signed-off-by: Chung-Hsien Hsu
Signed-off-by: Chi-Hsien Lin
Link: https://lore.kernel.org/r/20200817073316.33402-4-stanley.hsu@cypress.com
Signed-off-by: Johannes Berg -
We want to reuse the attributes for other counters such as BSS color
change. Rename them to more generic names.Signed-off-by: John Crispin
Link: https://lore.kernel.org/r/20200811080107.3615705-1-john@phrozen.org
Signed-off-by: Johannes Berg -
This patch adds the nl80211 structs, definitions, policies and parsing
code required to pass fixed HE rate, GI and LTF settings.Signed-off-by: Miles Hu
Signed-off-by: John Crispin
Link: https://lore.kernel.org/r/20200804081630.2013619-1-john@phrozen.org
[fix comment]
Signed-off-by: Johannes Berg
