21 May, 2019
1 commit
-
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the fileThese files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:GPL-2.0-only
Signed-off-by: Thomas Gleixner
Signed-off-by: Greg Kroah-Hartman
10 May, 2014
1 commit
-
This patch fixes host drivers to use CONFIG_PM_SLEEP instead of CONFIG_PM
where applicable. Benefits of this change:* unused code is not being compiled in for CONFIG_PM=y, CONFIG_PM_SLEEP=n
and CONFIG_PM_RUNTIME=y configurations* easier transition to use struct dev_pm_ops and SIMPLE_DEV_PM_OPS() in
the future* more consistent code (there are host drivers which are using the correct
CONFIG_PM_SLEEP checks already)The patch leaves the core libata code and ->port_[suspend,resume] support
in sata_[inic162x,nv,sil24].c alone for now.Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Tejun Heo
14 Feb, 2014
1 commit
-
None of these files are actually using any __init type directives
and hence don't need to include . Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.Cc: linux-ide@vger.kernel.org
Signed-off-by: Paul Gortmaker
Signed-off-by: Tejun Heo
03 Jun, 2013
1 commit
-
Use the wrapper function for getting the driver data using pci_dev
instead of using dev_get_drvdata() with &pdev->dev, so we can directly
pass a struct pci_dev. This is a purely cosmetic change.Signed-off-by: Jingoo Han
Signed-off-by: Tejun Heo
26 Jul, 2012
1 commit
-
This patch converts the drivers in drivers/ata/* to use module_pci_driver()
macro which makes the code smaller and a bit simpler.Signed-off-by: Axel Lin
Cc: Alan Cox
Cc: Jeff Garzik
Cc: Mikael Pettersson
Cc: Mark Lord
Cc: Jeremy Higdon
Cc: Benjamin Herrenschmidt
Signed-off-by: Jeff Garzik
24 Jul, 2011
2 commits
-
Use a single mechanism to show driver version.
Reduces text a tiny bit too.Remove uses of static int printed_version
Add and use ata_print_version(const struct device *, const char *ver)
and ata_print_version_once.$ size drivers/ata/built-in.*
text data bss dec hex filename
544969 73893 116584 735446 b38d6 drivers/ata/built-in.allyesconfig.ata.o
543870 73893 116592 734355 b34ad drivers/ata/built-in.allyesconfig.print_once.o
141328 14689 4220 160237 271ed drivers/ata/built-in.defconfig.ata.o
141212 14689 4220 160121 27179 drivers/ata/built-in.defconfig.print_once.oSigned-off-by: Joe Perches
Signed-off-by: Jeff Garzik -
Saves text by removing nearly duplicated text format strings by
creating ata__printk functions and printf extension %pV.ata defconfig size shrinks ~5% (~8KB), allyesconfig ~2.5% (~13KB)
Format string duplication comes from:
#define ata_link_printk(link, lv, fmt, args...) do { \
if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link) \
printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \
(link)->pmp , ##args); \
else \
printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \
} while(0)Coalesce long formats.
$ size drivers/ata/built-in.*
text data bss dec hex filename
544969 73893 116584 735446 b38d6 drivers/ata/built-in.allyesconfig.ata.o
558429 73893 117864 750186 b726a drivers/ata/built-in.allyesconfig.dev_level.o
141328 14689 4220 160237 271ed drivers/ata/built-in.defconfig.ata.o
149567 14689 4220 168476 2921c drivers/ata/built-in.defconfig.dev_level.oSigned-off-by: Joe Perches
Signed-off-by: Jeff Garzik
31 Mar, 2011
1 commit
-
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi
02 Mar, 2010
1 commit
-
This allows parallel scan and the like to be set without having to stop
using the existing full helper functions. This patch merely adds the argument
and fixes up the callers. It doesn't undo the special cases already in the
tree or add any new parallel callers.Signed-off-by: Alan Cox
Signed-off-by: Jeff Garzik
04 Dec, 2009
1 commit
-
Fix ->resume method to re-enable & re-init PCI device properly
before doing chipset specific setup.Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Jeff Garzik
11 Sep, 2009
1 commit
-
Signed-off-by: Marcin Slusarz
Signed-off-by: Jeff Garzik
25 Mar, 2009
1 commit
-
No functional changes in this patch.
Signed-off-by: Erik Inge Bolsø
Signed-off-by: Jeff Garzik
29 Dec, 2008
1 commit
-
There currently are the following looping constructs.
* __ata_port_for_each_link() for all available links
* ata_port_for_each_link() for edge links
* ata_link_for_each_dev() for all devices
* ata_link_for_each_dev_reverse() for all devices in reverse orderNow there's a need for looping construct which is similar to
__ata_port_for_each_link() but iterates over PMP links before the host
link. Instead of adding another one with long name, do the following
cleanup.* Implement and export ata_link_next() and ata_dev_next() which take
@mode parameter and can be used to build custom loop.
* Implement ata_for_each_link() and ata_for_each_dev() which take
looping mode explicitly.The following iteration modes are implemented.
* ATA_LITER_EDGE : loop over edge links
* ATA_LITER_HOST_FIRST : loop over all links, host link first
* ATA_LITER_PMP_FIRST : loop over all links, PMP links first* ATA_DITER_ENABLED : loop over enabled devices
* ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order
* ATA_DITER_ALL : loop over all devices
* ATA_DITER_ALL_REVERSE : loop over all devices in reverse orderThis change removes exlicit device enabledness checks from many loops
and makes it clear which ones are iterated over in which direction.Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik
18 Apr, 2008
6 commits
-
SFF functions have confusing names. Some have sff prefix, some have
bmdma, some std, some pci and some none. Unify the naming by...* SFF functions which are common to both BMDMA and non-BMDMA are
prefixed with ata_sff_.* SFF functions which are specific to BMDMA are prefixed with
ata_bmdma_.* SFF functions which are specific to PCI but apply to both BMDMA and
non-BMDMA are prefixed with ata_pci_sff_.* SFF functions which are specific to PCI and BMDMA are prefixed with
ata_pci_bmdma_.* Drop generic prefixes from LLD specific routines. For example,
bfin_std_dev_select -> bfin_dev_select.The following renames are noteworthy.
ata_qc_issue_prot() -> ata_sff_qc_issue()
ata_pci_default_filter() -> ata_bmdma_mode_filter()
ata_dev_try_classify() -> ata_sff_dev_classify()This rename is in preparation of separating SFF support out of libata
core layer. This patch strictly renames functions and doesn't
introduce any behavior difference.Signed-off-by: Tejun Heo
-
port_info->private_data is currently used for two purposes - to record
private data about the port_info or to specify host->private_data to
use when allocating ata_host.This overloading is confusing and counter-intuitive in that
port_info->private_data becomes host->private_data instead of
port->private_data. In addition, port_info and host don't correspond
to each other 1-to-1. Currently, the first non-NULL
port_info->private_data is used.This patch makes port_info->private_data just be what it is -
private_data for the port_info where LLD can jot down extra info.
libata no longer sets host->private_data to the first non-NULL
port_info->private_data, @host_priv argument is added to
ata_pci_init_one() instead. LLDs which use ata_pci_init_one() can use
this argument to pass in pointer to host private data. LLDs which
don't should use init-register model anyway and can initialize
host->private_data directly.Adding @host_priv instead of using init-register model for LLDs which
use ata_pci_init_one() is suggested by Alan Cox.Signed-off-by: Tejun Heo
Cc: Alan Cox -
ata_pci_init_one() is the only function which uses ops->irq_handler
and pi->sht. Other initialization functions take the same information
as arguments. This causes confusion and duplicate unused entries in
structures.Make ata_pci_init_one() take sht as an argument and use ata_interrupt
implicitly. All current users use ata_interrupt and if different irq
handler is necessary open coding ata_pci_init_one() using
ata_prepare_sff_host() and ata_activate_sff_host can be done under ten
lines including error handling and driver which requires custom
interrupt handler is likely to require custom initialization anyway.As ata_pci_init_one() was the last user of ops->irq_handler, this
patch also kills the field.Signed-off-by: Tejun Heo
-
libata lets low level drivers build ata_port_operations table and
register it with libata core layer. This allows low level drivers
high level of flexibility but also burdens them with lots of
boilerplate entries.This becomes worse for drivers which support related similar
controllers which differ slightly. They share most of the operations
except for a few. However, the driver still needs to list all
operations for each variant. This results in large number of
duplicate entries, which is not only inefficient but also error-prone
as it becomes very difficult to tell what the actual differences are.This duplicate boilerplates all over the low level drivers also make
updating the core layer exteremely difficult and error-prone. When
compounded with multi-branched development model, it ends up
accumulating inconsistencies over time. Some of those inconsistencies
cause immediate problems and fixed. Others just remain there dormant
making maintenance increasingly difficult.To rectify the problem, this patch implements ata_port_operations
inheritance. To allow LLDs to easily re-use their own ops tables
overriding only specific methods, this patch implements poor man's
class inheritance. An ops table has ->inherits field which can be set
to any ops table as long as it doesn't create a loop. When the host
is started, the inheritance chain is followed and any operation which
isn't specified is taken from the nearest ancestor which has it
specified. This operation is called finalization and done only once
per an ops table and the LLD doesn't have to do anything special about
it other than making the ops table non-const such that libata can
update it.libata provides four base ops tables lower drivers can inherit from -
base, sata, pmp, sff and bmdma. To avoid overriding these ops
accidentaly, these ops are declared const and LLDs should always
inherit these instead of using them directly.After finalization, all the ops table are identical before and after
the patch except for setting .irq_handler to ata_interrupt in drivers
which didn't use to. The .irq_handler doesn't have any actual effect
and the field will soon be removed by later patch.* sata_sx4 is still using old style EH and currently doesn't take
advantage of ops inheritance.Signed-off-by: Tejun Heo
-
libata lets low level drivers build scsi_host_template and register it
to the SCSI layer. This allows low level drivers high level of
flexibility but also burdens them with lots of boilerplate entries.This patch implements SHT initializers which can be used to initialize
all the boilerplate entries in a sht. Three variants of them are
implemented - BASE, BMDMA and NCQ - for different types of drivers.
Note that entries can be overriden by putting individual initializers
after the helper macro.All sht tables are identical before and after this patch.
Signed-off-by: Tejun Heo
-
Over the time, port info, ops and sht structures developed quite a bit
of inconsistencies. This patch updates drivers.* Enable/disable_pm callbacks added to all ahci ops tables.
* Every driver for SFF controllers now uses ata_sff_port_start()
instead of ata_port_start() unless the driver has custom
implementation.* Every driver for SFF controllers now uses ata_pci_default_filter()
unless the driver has custom implementation.* Removed an odd port_info->sht initialization from ata_piix.c.
Likely a merge byproduct.* A port which has ATA_FLAG_SATA set doesn't need to set cable_detect
to ata_cable_sata(). Remove it from via and mv port ops.* Some drivers had unnecessary .max_sectors initialization which is
ignored and was missing .slave_destroy callback. Fixed.* Removed unnecessary sht initializations port_info's.
* Removed onsolete scsi device suspend/resume callbacks from
pata_bf54x.* No reason to set ata_pci_default_filter() and bmdma functions for
PIO-only drivers. Remove those callbacks and replace
ata_bmdma_irq_clear with ata_noop_irq_clear.* pata_platform sets port_start to ata_dummy_ret0. port_start can
just be set to NULL.* sata_fsl supports NCQ but was missing qc_defer. Fixed.
* pata_rb600_cf implements dummy port_start. Removed.
Signed-off-by: Tejun Heo
13 Oct, 2007
6 commits
-
This avoids allocating DMA buffers if not needed but at the moment is
mostly just a neatness item.Signed-off-by: Alan Cox
Signed-off-by: Jeff Garzik -
It was always set to ata_port_disable(). Removed the hook, and replaced
the very few ap->ops->port_disable() callsites with direct calls to
ata_port_disable().Signed-off-by: Jeff Garzik
-
* ->irq_ack() is redundant to what the irq handler already
performs... chk-status + irq-clear. Furthermore, it is only
called in one place, when screaming-irq-debugging is enabled,
so we don't want to bother with a hook just for that.* ata_dummy_irq_on() is only ever used in drivers that have
no callpath reaching ->irq_on(). Remove .irq_on hook from
those drivers, and the now-unused ata_dummy_irq_on()Signed-off-by: Jeff Garzik
-
Make the following functions deal with ata_link instead of ata_port.
* ata_set_mode()
* ata_eh_autopsy() and related functions
* ata_eh_report() and related functions
* suspend/resume related functions
* ata_eh_recover() and related functionsSigned-off-by: Tejun Heo
Signed-off-by: Jeff Garzik -
Multiple links and different number of devices per link should be
considered to iterate over links and devices. This patch implements
and uses link and device iterators - ata_port_for_each_link() and
ata_link_for_each_dev() - and ata_link_max_devices().This change makes a lot of functions iterate over only possible
devices instead of from dev 0 to dev ATA_MAX_DEVICES. All such
changes have been examined and nothing should be broken.While at it, add a separating comment before device helpers to
distinguish them better from link helpers and others.Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik -
Introduce ata_link. It abstracts PHY and sits between ata_port and
ata_device. This new level of abstraction is necessary to support
SATA Port Multiplier, which basically adds a bunch of links (PHYs) to
a ATA host port. Fields related to command execution, spd_limit and
EH are per-link and thus moved to ata_link.This patch only defines the host link. Multiple link handling will be
added later. Also, a lot of ap->link derefences are added but many of
them will be removed as each part is converted to deal directly with
ata_link instead of ata_port.This patch introduces no behavior change.
Signed-off-by: Tejun Heo
Cc: James Bottomley
Signed-off-by: Jeff Garzik
10 Jul, 2007
1 commit
-
This flag only has meaning in old-EH drivers, and these drivers have
already been converted to the new EH. Remove.Signed-off-by: Jeff Garzik
22 May, 2007
1 commit
-
Signed-off-by: Jeff Garzik
12 May, 2007
2 commits
-
The intention of using port_mask in SFF init helpers was to eventually
support exoctic configurations such as combination of legacy and
native port on the same controller. This never became actually
necessary and the related code always has been subtly broken one way
or the other. Now that new init model is in place, there is no reason
to make common helpers capable of handling all corner cases. Exotic
cases can simply dealt within LLDs as necessary.This patch removes port_mask handling in SFF init helpers. SFF init
helpers don't take n_ports argument and interpret it into port_mask
anymore. All information is carried via port_info. n_ports argument
is dropped and always two ports are allocated. LLD can tell SFF to
skip certain port by marking it dummy. Note that SFF code has been
treating unuvailable ports this way for a long time until recent
breakage fix from Linus and is consistent with how other drivers
handle with unavailable ports.This fixes 1-port legacy host handling still broken after the recent
native mode fix and simplifies SFF init logic. The following changes
are made...* ata_pci_init_native_host() and ata_init_legacy_host() both now try
to initialized whatever they can and mark failed ports dummy. They
return 0 if any port is successfully initialized.* ata_pci_prepare_native_host() and ata_pci_init_one() now doesn't
take n_ports argument. All info should be specified via port_info
array. Always two ports are allocated.* ata_pci_init_bmdma() exported to be used by LLDs in exotic cases.
* port_info handling in all LLDs are standardized - all port_info
arrays are const stack variable named ppi. Unless the second port
is different from the first, its port_info is specified as NULL
(tells libata that it's identical to the last non-NULL port_info).* pata_hpt37x/hpt3x2n: don't modify static variable directly. Make an
on-stack copy instead as ata_piix does.* pata_uli: It has 4 ports instead of 2. Don't use
ata_pci_prepare_native_host(). Allocate the host explicitly and use
init helpers. It's simple enough.Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik -
Reimplement suspend/resume support using sdev->manage_start_stop.
* Device suspend/resume is now SCSI layer's responsibility and the
code is simplified a lot.* DPM is dropped. This also simplifies code a lot. Suspend/resume
status is port-wide now.* ata_scsi_device_suspend/resume() and ata_dev_ready() removed.
* Resume now has to wait for disk to spin up before proceeding. I
couldn't find easy way out as libata is in EH waiting for the
disk to be ready and sd is waiting for EH to complete to issue
START_STOP.* sdev->manage_start_stop is set to 1 in ata_scsi_slave_config().
This fixes spindown on shutdown and suspend-to-disk.Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik
29 Apr, 2007
1 commit
-
Signed-off-by: Alan Cox
Signed-off-by: Jeff Garzik
03 Mar, 2007
1 commit
-
Add missing #ifdef CONFIG_PM conditionals around all PM related parts
in libata LLDs.Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik
21 Feb, 2007
1 commit
-
We can't specify which mode in the cases below but we can at least say
PIO and look consistent with the default.Signed-off-by: Alan Cox
Signed-off-by: Jeff Garzik
10 Feb, 2007
3 commits
-
This patch is against each libata driver.
Two IRQ calls are added in ata_port_operations.
- irq_on() is used to enable interrupts.
- irq_ack() is used to acknowledge a device interrupt.In most drivers, ata_irq_on() and ata_irq_ack() are used for
irq_on and irq_ack respectively.In some drivers (ex: ahci, sata_sil24) which cannot use them
as is, ata_dummy_irq_on() and ata_dummy_irq_ack() are used.Signed-off-by: Kou Ishizaki
Signed-off-by: Akira Iguchi
Signed-off-by: Jeff Garzik -
Convert libata core layer and LLDs to use iomap.
* managed iomap is used. Pointer to pcim_iomap_table() is cached at
host->iomap and used through out LLDs. This basically replaces
host->mmio_base.* if possible, pcim_iomap_regions() is used
Most iomap operation conversions are taken from Jeff Garzik
's iomap branch.Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik -
Update libata LLDs to use devres. Core layer is already converted to
support managed LLDs. This patch simplifies initialization and fixes
many resource related bugs in init failure and detach path. For
example, all converted drivers now handle ata_device_add() failure
gracefully without excessive resource rollback code.As most resources are released automatically on driver detach, many
drivers don't need or can do with much simpler ->{port|host}_stop().
In general, stop callbacks are need iff port or host needs to be given
commands to shut it down. Note that freezing is enough in many cases
and ports are automatically frozen before being detached.Signed-off-by: Tejun Heo
Signed-off-by: Jeff Garzik
25 Jan, 2007
1 commit
-
When set_mode() changed ->set_mode didn't adapt. This makes the needed
changes and removes the relevant FIXME case.Signed-off-by: Alan Cox
Signed-off-by: Jeff Garzik
16 Dec, 2006
1 commit
-
This removes the extra definition of the .error_handler member
in the pata_rz1000 driver.Signed-off-by: Ira W. Snyder
Cc: Jeff Garzik
Cc: Alan Cox
Signed-off-by: Andrew Morton
Signed-off-by: Jeff Garzik
03 Dec, 2006
1 commit
-
sht->max_sectors is overrided unconditionally in ->slave_configure.
There's no reason to set it to any value.Signed-off-by: Tejun Heo
02 Dec, 2006
1 commit
-
The RZ1000 is a generic device except that it has a readahead fifo flaw
that corrupts. We force this off at init time but we want to be paranoid
and force it off at resume as well. I don't know of any actual hardware
that supports both RZ1000 and suspend to RAM but given its a disk muncher
better safe than sorry.Signed-off-by: Alan Cox
Signed-off-by: Jeff Garzik
29 Nov, 2006
1 commit
-
Many LLDs are missing sht->slave_destroy. The method is mandatory to
support device warm unplugging (echo 1 > /sys/.../delete). Without
it, libata might access released scsi device.Signed-off-by: Tejun Heo