21 Mar, 2006
22 commits
-
Pass actual capacity of created SRQ back to userspace, so that
userspace can report accurate capacities. This requires an ABI bump,
to change struct ib_uverbs_create_srq_resp.Signed-off-by: Dotan Barak
Signed-off-by: Roland Dreier -
Have mthca's create_srq method return the actual capacity of the SRQ
that gets created. Also update comments in to
clarify that this is what is expected from ib_create_srq().Signed-off-by: Dotan Barak
Signed-off-by: Roland Dreier -
Cosmetic change: make alignment explicit in to_ipoib_neigh.
Signed-off-by: Michael S. Tsirkin
Signed-off-by: Roland Dreier -
The size of struct ib_uverbs_create_qp_resp is not even multiple of 8
bytes. This causes problems for low-level drivers that add private
data after the structure: 32-bit userspace will look in the wrong
place for a response from a 64-bit kernel. Fix this by adding a
reserved field. Also, bump the ABI version because this changes the
size of a structure.Pointed out by Hoang-Nam Nguyen .
Signed-off-by: Roland Dreier
-
Signed-off-by: Roland Dreier
-
Implement the query_qp and query_srq methods in mthca.
Signed-off-by: Eli Cohen
Signed-off-by: Roland Dreier -
Add support to uverbs to handle querying userspace SRQs (shared
receive queues), including adding an ABI for marshalling requests and
responses. The kernel midlayer already has the underlying
ib_query_srq() function.Signed-off-by: Dotan Barak
Signed-off-by: Roland Dreier -
Add support to uverbs to handle querying userspace QPs (queue pairs),
including adding an ABI for marshalling requests and responses. The
kernel midlayer already has the underlying ib_query_qp() function.Signed-off-by: Dotan Barak
Signed-off-by: Roland Dreier -
Remove trailing whitespace and fix indentation that with spaces
instead of tabs.Signed-off-by: Roland Dreier
-
Use ib_modify_qp_is_ok() in mthca, and delete the big table of
attributes for queue pair state transitions.Signed-off-by: Roland Dreier
-
The in-kernel mthca driver contains a table of which attributes are
valid for each queue pair state transition. It turns out that both
other IB drivers -- ipath and ehca -- which are being prepared for
merging have copied this table, errors and all.To forestall this code duplication, move this table and the code to
check parameters against it into a midlayer library function,
ib_modify_qp_is_ok().Signed-off-by: Roland Dreier
-
Add low-level driver support to ib_mthca so that consumers can request
a "send queue drained" event be generated when a transiton to the SQD
state completes.Signed-off-by: Roland Dreier
-
The call to ib_get_agent_port() shouldn't be possible to fail when
smi_check_local_dr_smp() is called from ib_mad_recv_done_handler().
When it is called from handle_outgoing_dr_smp(), the device and
port_num come from mad_agent_priv so I assume the call to
ib_get_agent_port() shouldn't fail either. In either case,
smi_check_local_smp() only uses the mad_agent pointer to check that
mad_agent->device->process_mad is not NULL. The device pointer would
have to be the same as the one passed to smi_check_local_dr_smp()
since that pointer is used later instead of the one checked in
smi_check_local_smp().Signed-off-by: Hal Rosenstock
Signed-off-by: Roland Dreier -
smi_check_local_dr_smp() is called only from two places in core/mad.c
It returns 0 or 1. In smi_check_local_dr_smp(), it checks for
a directed route SMP but this function is only called when the SMP
is a directed route so this is a NOP.Signed-off-by: Hal Rosenstock
Signed-off-by: Roland Dreier -
This patch allows the consumer to set the page size of "pages" mapped
by the pool FMRs, which is a feature already existing in the base
verbs API. On the cosmetic side it changes ib_fmr_attr.page_size field
to be named page_shift.Signed-off-by: Or Gerlitz
Signed-off-by: Roland Dreier -
Add a modify_device method to mthca, which implements setting the node
description. This makes the writable "node_desc" sysfs attribute work
for Mellanox HCAs.Signed-off-by: Michael S. Tsirkin
Signed-off-by: Roland Dreier -
Expose a writable "node_desc" sysfs attribute for InfiniBand devices.
This allows userspace to update the node description with information
such as the node's hostname, so that IB network management software
can tie its view to the real world.Signed-off-by: Michael S. Tsirkin
Signed-off-by: Roland Dreier -
Remove trailing whitespace and fix indentation that with spaces
instead of tabs.Signed-off-by: Roland Dreier
-
Add low-level driver support for resizing CQs (both kernel and
userspace) to mthca.Signed-off-by: Roland Dreier
-
Add support to uverbs to handle resizing userspace CQs (completion
queues), including adding an ABI for marshalling requests and
responses. The kernel midlayer already has ib_resize_cq().Signed-off-by: Roland Dreier
-
The might_sleep() annotations in mthca are silly -- they all occur
shortly before calls that will end up in core functions like kmalloc()
that will print the same warning in an unsafe context anyway. In
fact, beyond cluttering the source, we're actually bloating text with
CONFIG_DEBUG_SPINLOCK_SLEEP and/or CONFIG_PREEMPT_VOLUNTARY set.With both options set, getting rid of the might_sleep()s saves a lot:
add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-171 (-171)
function old new delta
mthca_pd_alloc 132 109 -23
mthca_init_cq 969 946 -23
mthca_mr_alloc 592 568 -24
mthca_pd_free 67 42 -25
mthca_free_mr 219 194 -25
mthca_free_cq 570 545 -25
mthca_fmr_alloc 742 716 -26Signed-off-by: Roland Dreier
-
The function mthca_free_err_wqe() can never fail, so get rid of its
return value. That means handle_error_cqe() doesn't have to check
what mthca_free_err_wqe() returns, which means it can't fail either
and doesn't have to return anything either. All this results in
simpler source code and a slight object code improvement:add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-10 (-10)
function old new delta
mthca_free_err_wqe 83 81 -2
mthca_poll_cq 1758 1750 -8Signed-off-by: Roland Dreier
20 Mar, 2006
5 commits
-
This address is going to be obsolete, so I should update it.
-
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] SB1: Check for -mno-sched-prolog if building corelis debug kernel.
[MIPS] Sibyte: Fix race in sb1250_gettimeoffset().
[MIPS] Sibyte: Fix interrupt timer off by one bug.
[MIPS] Sibyte: Fix M_SCD_TIMER_INIT and M_SCD_TIMER_CNT wrong field width.
[MIPS] Protect more of timer_interrupt() by xtime_lock.
[MIPS] Work around bad code generation for .
[MIPS] Simple patch to power off DBAU1200
[MIPS] Fix DBAu1550 software power off.
[MIPS] local_r4k_flush_cache_page fix
[MIPS] SB1: Fix interrupt disable hazard.
[MIPS] Get rid of the IP22-specific code in arclib.
Update MAINTAINERS entry for MIPS. -
The 40-bit DMA workaround recently implemented for 5714, 5715, and
5780 needs to be expanded because there may be other tg3 devices
behind the EPB Express to PCIX bridge in the 5780 class device.For example, some 4-port card or mother board designs have 5704 behind
the 5714.All devices behind the EPB require the 40-bit DMA workaround.
Thanks to Chris Elmquist again for reporting the problem and testing
the patch.Signed-off-by: Michael Chan
Signed-off-by: David S. Miller -
If the AX.25 dialect chosen by the sysadmin is set to DAMA master / 3
(or DAMA slave / 2, if CONFIG_AX25_DAMA_SLAVE=n) ax25_kick() will fall
through the switch statement without calling ax25_send_iframe() or any
other function that would eventually free skbn thus leaking the packet.Fix by restricting the sysctl inferface to allow only actually supported
AX.25 dialects.The system administration mistake needed for this to happen is rather
unlikely, so this is an uncritical hole.Coverity #651.
Signed-off-by: Ralf Baechle DL5RB
Signed-off-by: David S. Miller
19 Mar, 2006
13 commits
-
VIDEO_CX88_ALSA should not be between VIDEO_CX88_DVB and
VIDEO_CX88_DVB_ALL_FRONTENDSWhen cx88-alsa was added to cx88/Kconfig, it was added in between
VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS. This caused
undesireable effects to the appearance of the menu options in
menuconfig.This fix reorders cx88-alsa and cx88-dvb in Kconfig, to match saa7134,
and restore the correct menuconfig appearance.Signed-off-by: Michael Krufky
Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Linus Torvalds -
Fixed em28xx based system lockup, device needs to be initialized before
starting the isoc transfer otherwise the system will completly lock up.Signed-off-by: Markus Rechberger
Signed-off-by: Mauro Carvalho Chehab
Signed-off-by: Linus Torvalds -
sys_unshare() does mmput(new_mm). This is not enough if we have
mm->core_waiters.This patch is a temporary fix for soon to be released 2.6.16.
Signed-off-by: Oleg Nesterov
[ Checked with Uli: "I'm not planning to use unshare(CLONE_VM). It's
not needed for any functionality planned so far. What we (as in Red
Hat) need unshare() for now is the filesystem side." ]
Signed-off-by: Linus Torvalds -
Signed-off-by: Ralf Baechle
-
From Dave Johnson :
sb1250_gettimeoffset() simply reads the current cpu 0 timer remaining
value, however once this counter reaches 0 and the interrupt is raised,
it immediately resets and begins to count down again.If sb1250_gettimeoffset() is called on cpu 1 via do_gettimeofday() after
the timer has reset but prior to cpu 0 processing the interrupt and
taking write_seqlock() in timer_interrupt() it will return a full value
(or close to it) causing time to jump backwards 1ms. Once cpu 0 handles
the interrupt and timer_interrupt() gets far enough along it will jump
forward 1ms.Fix this problem by implementing mips_hpt_*() on sb1250 using a spare
timer unrelated to the existing periodic interrupt timers. It runs at
1Mhz with a full 23bit counter. This eliminated the custom
do_gettimeoffset() for sb1250 and allowed use of the generic
fixed_rate_gettimeoffset() using mips_hpt_*() and timerhi/timerlo.Signed-off-by: Ralf Baechle
-
From Dave Johnson :
The timers need to be loaded with 1 less than the desired interval not
the interval itself.Signed-off-by: Ralf Baechle
-
From Dave Johnson :
Field width should be 23 bits not 20 bits.
Signed-off-by: Ralf Baechle
-
From Dave Johnson :
* do_timer() expects the arch-specific handler to take the lock as it
modifies jiffies[_64] and xtime.
* writing timerhi/lo in timer_interrupt() will mess up
fixed_rate_gettimeoffset() which reads timerhi/lo.Signed-off-by: Ralf Baechle
-
If a call to set_io_port_base() was being followed by usage of
mips_io_port_base in the same function gcc was possibly using the old
value due to some clever abuse of const. Adding a barrier will keep
the optimization and result in correct code with latest gcc.Signed-off-by: Ralf Baechle
-
Signed-off-by: Matej Kupljen
Signed-off-by: Ralf Baechle -
Signed-off-by: Sergei Shtylyov
Signed-off-by: Ralf Baechle -
If dcache_size != icache_size or dcache_size != scache_size, or
set-associative cache, icache/scache does not flushed properly. Make
blast_?cache_page_indexed() masks its index value correctly. Also,
use physical address for physically indexed pcache/scache.Signed-off-by: Atsushi Nemoto
Signed-off-by: Ralf Baechle -
The SB1 core has a three cycle interrupt disable hazard but we were
wrongly treating it as fully interlocked.Signed-off-by: Ralf Baechle
