15 Mar, 2011
17 commits
-
Signed-off-by: Yoichi Yuasa
Cc: linux-mips
Patchwork: https://patchwork.linux-mips.org/patch/2055/
Signed-off-by: Ralf Baechle -
This error was reported by cppcheck:
arch/mips/loongson/common/machtype.c:56: error: Dangerous usage of 'str' (strncpy doesn't always 0-terminate it)If strncpy copied MACHTYPE_LEN bytes, the destination string str
was not terminated.The patch adds one more byte to str and makes sure that this byte is
always 0.Signed-off-by: Stefan Weil
Cc: Wu Zhangjin
Cc: Arnaud Patard
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2053/
Signed-off-by: Ralf Baechle -
Under some combinations of CONFIG_*, lastpfn in page_is_ram is 'set
but not used'. Mark it as __maybe_unused to quiet the warning/error.Signed-off-by: David Daney
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2033/
Signed-off-by: Ralf Baechle -
GCC-4.6 can find more unused code than previous versions could.
In the case of arch/mips/math-emu/ieee754int.h, the COMPXSP and
COMPXDP macros are used in several places, but a couple of them leave
xs unused. The easiest thing to do is mark it as __maybe_unused to
quiet the warning.Signed-off-by: David Daney
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2032/
Signed-off-by: Ralf Baechle -
The variable arg3 in _sys_sysmips() is unused. Remove it.
Signed-off-by: David Daney
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2034/
Signed-off-by: Ralf Baechle -
GCC-4.6 can find more unused code than previous versions could.
In the case of protected_restore_fp_context{,32}, the variable tmp is
really used. Its use is tricky in that we really care about the side
effects of the __put_user() calls. So we must mark tmp with
__maybe_unused to quiet the warning.Signed-off-by: David Daney
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2035/
Signed-off-by: Ralf Baechle -
Signed-off-by: Anoop P A
To: Ben Hutchings
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1804/
Signed-off-by: Ralf Baechle -
Signed-off-by: Anoop P A
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1803/
Tested-by: Shane McDonald
Signed-off-by: Ralf Baechle -
Loongson builds have an ad-hoc cmdline default of "console=ttyS0,115200
root=/dev/hda1". These settings come from a vendor; I remember builds
from Lemote branch requiring a "console=tty" override in order to get a
working console.At least on Yeeloong, they're particularly useless: there's no external
serial port, and the IDE drive is now recognised as /dev/sda.Signed-off-by: Robert Millan
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1759/
Signed-off-by: Ralf Baechle -
The sysmips(MIPS_FIXADE, ...) case contains an obvious copy-and-paste
error in the handling of the TIF_LOGADE flag. Fix thatPatchwork: https://patchwork.linux-mips.org/patch/1997/
Signed-off-by: Ralf Baechle -
It was reported that GCC-4.3.3 (with CodeSourcery extensions) fails
without this.Reported-by: Jonas Gorski
Signed-off-by: David Daney
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2010/
Signed-off-by: Ralf Baechle -
trace.func should be set to the recorded ip of the mcount calling site
in the __mcount_loc section to filter the function entries configured
through the tracing/set_graph_function interface, but before, this is
set to the self_ra(the return address of mcount), which has made
set_graph_function not work as expected.This fixes it via calculating the right recorded ip in the __mcount_loc
section and assign it to trace.func.Reported-by: Zhiping Zhong
Signed-off-by: Wu Zhangjin
Cc: Steven Rostedt
Cc: Sergei Shtylyov
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2017/
Signed-off-by: Ralf Baechle -
This moves the comments out of ftrace_make_nop() and cleans it. At the
same time, a macro MCOUNT_OFFSET_INSNS is defined for sharing with the
next patch.Signed-off-by: Wu Zhangjin
Cc: Steven Rostedt
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2008/
Signed-off-by: Ralf Baechle -
The old prepare_ftrace_return() for MIPS is confused and have introduced
some problem. This patch cleans up the names of the arguments, variables
and related functions.For MIPS, the 2nd argument of prepare_ftrace_return() is not really the
'selfpc' described in ftrace-design.txt but instead it is the self
return address. This did break the compatibility of the generic
interface but really reduced one unneeded calculation for to get the
current function name, the parent return address and the self return
address are enough, no need to tranform the self return address to the
self address.But set_graph_function of function graph tracer is an exception, it does
need the 2nd argument of prepare_ftrace_return() as 'selfpc', for it
will use 'selfpc' to match user's configuration of function graph
entries, but in reality, it doesn't need the 'selfpc' but the recorded
ip address of the mcount calling site in the __mcount_loc section. So,
the 2nd argument of prepare_ftrace_return() is not important, the real
requirement is the right recorded ip address should be calculated and
assign to trace.func, this will be fixed in the next patches.Reported-by: Zhiping Zhong
Signed-off-by: Wu Zhangjin
Cc: Steven Rostedt
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2007/
Signed-off-by: Ralf Baechle -
The old in_module() may not work in some situations(e.g. when module &
kernel are in the same address space when CONFIG_MAPPED_KERNEL=y), The
in_kernel_space() is more generic and it is also easy to be implemented
via cloning the existing core_kernel_text(), so, replace the in_module()
with in_kernel_space().Signed-off-by: Wu Zhangjin
Cc: Steven Rostedt
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2005/
Signed-off-by: Ralf Baechle -
This simply moves the "ip-=4" statement down to the end of the do { ...
} while (...); loop, which reduces one unneeded subtration and the
subsequent memory loading and comparison.Signed-off-by: Wu Zhangjin
Cc: Steven Rostedt
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2006/
Signed-off-by: Ralf Baechle -
SPIN_LOCK_UNLOCK is deprecated. Use the lockdep capable variant instead.
Signed-off-by: Thomas Gleixner
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2025/
Signed-off-by: Ralf Baechle
14 Mar, 2011
11 commits
-
Fix for a dumb preadv()/pwritev() compat bug - unlike the native
variants, the compat_... ones forget to check FMODE_P{READ,WRITE}, so
e.g. on pipe the native preadv() will fail with -ESPIPE and compat one
will act as readv() and succeed.Not critical, but it's a clear bug with trivial fix, so IMO it's OK for
-final.Signed-off-by: Al Viro
Signed-off-by: Linus Torvalds -
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
hwmon/f71882fg: Set platform drvdata to NULL later
hwmon/f71882fg: Fix a typo in a comment -
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: break out of shrink_delalloc earlier
btrfs: fix not enough reserved space
btrfs: fix dip leak
Btrfs: make sure not to return overlapping extents to fiemap
Btrfs: deal with short returns from copy_from_user
Btrfs: fix regressions in copy_from_user handling -
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] target: Fix t_transport_aborted handling in LUN_RESET + active I/O shutdown -
Recent change to fixdep:
commit b7bd182176960fdd139486cadb9962b39f8a2b50
Author: Michal Marek
Date: Thu Feb 17 15:13:54 2011 +0100fixdep: Do not record dependency on the source file itself
changed the format of the *.cmd files without realizing that it is also
used by modpost. Put the path to the source file to the file back, in a
special variable, so that modpost sees all source files when calculating
srcversion for modules.Reported-and-tested-by: Henrik Rydberg
Signed-off-by: Michal Marek
Signed-off-by: Linus Torvalds -
* git://git.infradead.org/users/dwmw2/mtd-2.6.38:
mtd: add "platform:" prefix for platform modalias
mtd: mtd_blkdevs: fix double free on error path
mtd: amd76xrom: fix oops at boot when resources are not available
mtd: fix race in cfi_cmdset_0001 driver
mtd: jedec_probe: initialise make sector erase command variable
mtd: jedec_probe: Change variable name from cfi_p to cfi -
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon: fix page flipping hangs on r300/r400
drm/radeon: add pageflip hooks for fusion -
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: fix mis-synchronisation in blkdev_issue_zeroout() -
* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ASoC: Ensure WM8958 gets all WM8994 late revision widgets
ASoC: Fix typo in late revision WM8994 DAC2R name
ASoC: Use the correct DAPM context when cleaning up final widget set
ASoC: Fix broken bitfield definitions in WM8978
ASoC: AM3517: Update codec name after multi-component update -
The device table is required to load modules based on modaliases.
After adding MODULE_DEVICE_TABLE, below entries will be added to
modules.pcimap:pch_gpio 0x00008086 0x00008803 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
ml_ioh_gpio 0x000010db 0x0000802e 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0Signed-off-by: Axel Lin
Cc: Tomoya MORINAGA
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
When vmscan.c calls page_referenced(), if an anon page was created
before a process forked, rmap will search for it in both of the
processes, even though one of them might have since broken COW.If the child process mlocks the vma where the COWed page belongs to,
page_referenced() running on the page mapped by the parent would lead to
*vm_flags getting VM_LOCKED set erroneously (leading to the references
on the parent page being ignored and evicting the parent page too
early).*mapcount would also be decremented by page_referenced_one even if the
page wasn't found by page_check_address.This also lets pmdp_clear_flush_young_notify() go ahead on a
pmd_trans_splitting() pmd.We hold the page_table_lock so __split_huge_page_map() must wait the
pmdp_clear_flush_young_notify() to complete before it can modify the
pmd. The pmd is also still mapped in userland so the young bit may
materialize through a tlb miss before split_huge_page_map runs.This will provide a more accurate page_referenced() behavior during
split_huge_page().Signed-off-by: Andrea Arcangeli
Reported-by: Michel Lespinasse
Reviewed-by: Michel Lespinasse
Reviewed-by: Minchan Kim
Reviewed-by: Johannes Weiner
Reviewed-by: Rik van Riel
Reviewed-by: KOSAKI Motohiro
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
13 Mar, 2011
3 commits
-
This avoids a possible race leading to trying to dereference NULL.
Signed-off-by: Hans de Goede
Acked-by: Jean Delvare
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck -
Signed-off-by: Hans de Goede
Acked-by: Jean Delvare
Signed-off-by: Guenter Roeck -
We've been getting reports of complete system lockups with rv3xx hw on
AGP and PCIE when running gnome-shell or kwin with compositing.It appears the hw really doesn't like setting these registers while
stuff is running, this moves the setting of the registers into the modeset
since they aren't required to be changed anywhere else.fixes: https://bugs.freedesktop.org/show_bug.cgi?id=35183
Reported-and-tested-by: Álmos
12 Mar, 2011
1 commit
-
Josef had changed shrink_delalloc to exit after three shrink
attempts, which wasn't quite enough because new writers could
race in and steal free space.But it also fixed deadlocks and stalls as we tried to recover
delalloc reservations. The code was tweaked to loop 1024
times, and would reset the counter any time a small amount
of progress was made. This was too drastic, and with a
lot of writers we can end up stuck in shrink_delalloc forever.The shrink_delalloc loop is fairly complex because the caller is looping
too, and the caller will go ahead and force a transaction commit to make
sure we reclaim space.This reworks things to exit shrink_delalloc when we've forced some
writeback and the delalloc reservations have gone down. This means
the writeback has not just started but has also finished at
least some of the metadata changes required to reclaim delalloc
space.If we've got this wrong, we're returning ENOSPC too early, which
is a big improvement over the current behavior of hanging the machine.Test 224 in xfstests hammers on this nicely, and with 1000 writers
trying to fill a 1GB drive we get our first ENOSPC at 93% full. The
other writers are able to continue until we get 100%.This is a worst case test for btrfs because the 1000 writers are doing
small IO, and the small FS size means we don't have a lot of room
for metadata chunks.Signed-off-by: Chris Mason
11 Mar, 2011
8 commits
-
BZ29402
https://bugzilla.kernel.org/show_bug.cgi?id=29402We can hit serious mis-synchronization in bio completion path of
blkdev_issue_zeroout() leading to a panic.The problem is that when we are going to wait_for_completion() in
blkdev_issue_zeroout() we check if the bb.done equals issued (number of
submitted bios). If it does, we can skip the wait_for_completition()
and just out of the function since there is nothing to wait for.
However, there is a ordering problem because bio_batch_end_io() is
calling atomic_inc(&bb->done) before complete(), hence it might seem to
blkdev_issue_zeroout() that all bios has been completed and exit. At
this point when bio_batch_end_io() is going to call complete(bb->wait),
bb and wait does not longer exist since it was allocated on stack in
blkdev_issue_zeroout() ==> panic!(thread 1) (thread 2)
bio_batch_end_io() blkdev_issue_zeroout()
if(bb) { ...
if (bb->end_io) ...
bb->end_io(bio, err); ...
atomic_inc(&bb->done); ...
... while (issued != atomic_read(&bb.done))
... (let issued == bb.done)
... (do the rest of the function)
... return ret;
complete(bb->wait);
^^^^^^^^
panicWe can fix this easily by simplifying bio_batch and completion counting.
Also remove bio_end_io_t *end_io since it is not used.
Signed-off-by: Lukas Czerner
Reported-by: Eric Whitney
Tested-by: Eric Whitney
Reviewed-by: Jeff Moyer
CC: Dmitry Monakhov
Signed-off-by: Jens Axboe -
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS
with "platform:"), the platform modalias is prefixed with "platform:".Signed-off-by: Axel Lin
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse
Cc: stable@kernel.org -
This one liner patch fixes double free that will occur if add_mtd_blktrans_dev
fails. On failure it frees the input argument, but all its users also free it
on error which is natural thing to do. Thus don't free it.All credit for finding that bug belongs to reporters of the bug in the android bugzilla
http://code.google.com/p/android/issues/detail?id=13761Commit message tweaked by Artem.
Signed-off-by: Maxim Levitsky
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse
Cc: stable@kernel.org -
For some unknown reasons resources needed by amd76xrom driver can be
unavailable. And instead of returning an error, the driver keeps going
and crash the kernel. This patch fixes the problem by making the driver
return -EBUSY if the resources are not available.Commit messages tweaked by Artem.
Reported-by: Russell Whitaker
Signed-off-by: Stanislaw Gruszka
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse
Cc: stable@kernel.org -
As inval_cache_and_wait_for_operation() drop and reclaim the lock
to invalidate the cache, some other thread may suspend the operation
before reaching the for(;;) loop. Therefore the loop must start with
checking the chip->state before reading status from the chip.Signed-off-by: Joakim Tjernlund
Acked-by: Michael Cashwell
Acked-by: Stefan Bigler
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse
Cc: stable@kernel.org -
In the commit 08968041bef437ec363623cd3218c2b083537ada
(mtd: cfi_cmdset_0002: make sector erase command variable)
introdused a field sector_erase_cmd. In the same commit initialisation
of cfi->sector_erase_cmd made in cfi_chip_setup()
(file drivers/mtd/chips/cfi_probe.c), so the CFI chip has no problem:...
cfi->cfi_mode = CFI_MODE_CFI;
cfi->sector_erase_cmd = CMD(0x30);
...But for the JEDEC chips this initialisation is not carried out,
so the JEDEC chips have sector_erase_cmd == 0.This patch adds the missing initialisation.
Signed-off-by: Antony Pavlov
Acked-by: Guillaume LECERF
Signed-off-by: David Woodhouse
CC: stable@kernel.org -
In the following commit, we'll need to use the CMD() macro in order to
fix the initialisation of the sector_erase_cmd field. That requires the
local variable to be called 'cfi', so change it first in a simple patch.Signed-off-by: Antony Pavlov
Acked-by: Guillaume LECERF
Signed-off-by: David Woodhouse
CC: stable@kernel.org -
Looks like these got passed over with both being merged at the same
time but not quite meeting in the middle.should fix: https://bugs.freedesktop.org/show_bug.cgi?id=34137
along with Michael's phoronix article.Reported-by: Chi-Thanh Christopher Nguyen
Article-written-by: Michael Larabel @ phoronix
Signed-off-by: Dave Airlie
