Eric Lee / smarc-fsl-linux-kernel

27 Jul, 2011

1 commit

  • 60063497a   atomic: use <linux/atomic.h> ... Browse Code »

    This allows us to move duplicated code in
    (atomic_inc_not_zero() for now) to

    Signed-off-by: Arun Sharma
    Reviewed-by: Eric Dumazet
    Cc: Ingo Molnar
    Cc: David Miller
    Cc: Eric Dumazet
    Acked-by: Mike Frysinger
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Arun Sharma
     

07 Jun, 2011

1 commit

11 Dec, 2010

1 commit

  • d9ca676bc   atm: correct sysfs 'device' link creation and parent relationships ... Browse Code »

    The ATM subsystem was incorrectly creating the 'device' link for ATM
    nodes in sysfs. This led to incorrect device/parent relationships
    exposed by sysfs and udev. Instead of rolling the 'device' link by hand
    in the generic ATM code, pass each ATM driver's bus device down to the
    sysfs code and let sysfs do this stuff correctly.

    Signed-off-by: Dan Williams
    Signed-off-by: David S. Miller

    Dan Williams
     

16 Jul, 2010

1 commit

30 Mar, 2010

1 commit

  • 5a0e3ad6a   include cleanup: Update gfp.h and slab.h includes to prepare for breaking implic… ... Browse Code »

    …it slab.h inclusion from percpu.h

    percpu.h is included by sched.h and module.h and thus ends up being
    included when building most .c files. percpu.h includes slab.h which
    in turn includes gfp.h making everything defined by the two files
    universally available and complicating inclusion dependencies.

    percpu.h -> slab.h dependency is about to be removed. Prepare for
    this change by updating users of gfp and slab facilities include those
    headers directly instead of assuming availability. As this conversion
    needs to touch large number of source files, the following script is
    used as the basis of conversion.

    http://userweb.kernel.org/~tj/misc/slabh-sweep.py

    The script does the followings.

    * Scan files for gfp and slab usages and update includes such that
    only the necessary includes are there. ie. if only gfp is used,
    gfp.h, if slab is used, slab.h.

    * When the script inserts a new include, it looks at the include
    blocks and try to put the new include such that its order conforms
    to its surrounding. It's put in the include block which contains
    core kernel includes, in the same order that the rest are ordered -
    alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
    doesn't seem to be any matching order.

    * If the script can't find a place to put a new include (mostly
    because the file doesn't have fitting include block), it prints out
    an error message indicating which .h file needs to be added to the
    file.

    The conversion was done in the following steps.

    1. The initial automatic conversion of all .c files updated slightly
    over 4000 files, deleting around 700 includes and adding ~480 gfp.h
    and ~3000 slab.h inclusions. The script emitted errors for ~400
    files.

    2. Each error was manually checked. Some didn't need the inclusion,
    some needed manual addition while adding it to implementation .h or
    embedding .c file was more appropriate for others. This step added
    inclusions to around 150 files.

    3. The script was run again and the output was compared to the edits
    from #2 to make sure no file was left behind.

    4. Several build tests were done and a couple of problems were fixed.
    e.g. lib/decompress_*.c used malloc/free() wrappers around slab
    APIs requiring slab.h to be added manually.

    5. The script was run on all .h files but without automatically
    editing them as sprinkling gfp.h and slab.h inclusions around .h
    files could easily lead to inclusion dependency hell. Most gfp.h
    inclusion directives were ignored as stuff from gfp.h was usually
    wildly available and often used in preprocessor macros. Each
    slab.h inclusion directive was examined and added manually as
    necessary.

    6. percpu.h was updated not to include slab.h.

    7. Build test were done on the following configurations and failures
    were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
    distributed build env didn't work with gcov compiles) and a few
    more options had to be turned off depending on archs to make things
    build (like ipr on powerpc/64 which failed due to missing writeq).

    * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
    * powerpc and powerpc64 SMP allmodconfig
    * sparc and sparc64 SMP allmodconfig
    * ia64 SMP allmodconfig
    * s390 SMP allmodconfig
    * alpha SMP allmodconfig
    * um on x86_64 SMP allmodconfig

    8. percpu.h modifications were reverted so that it could be applied as
    a separate patch and serve as bisection point.

    Given the fact that I had only a couple of failures from tests on step
    6, I'm fairly confident about the coverage of this conversion patch.
    If there is a breakage, it's likely to be something in one of the arch
    headers which should be easily discoverable easily on most builds of
    the specific arch.

    Signed-off-by: Tejun Heo <tj@kernel.org>
    Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
    Cc: Ingo Molnar <mingo@redhat.com>
    Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

    Tejun Heo
     

01 Oct, 2009

1 commit

  • b7058842c   net: Make setsockopt() optlen be unsigned. ... Browse Code »

    This provides safety against negative optlen at the type
    level instead of depending upon (sometimes non-trivial)
    checks against this sprinkled all over the the place, in
    each and every implementation.

    Based upon work done by Arjan van de Ven and feedback
    from Linus Torvalds.

    Signed-off-by: David S. Miller

    David S. Miller
     

23 Sep, 2008

1 commit

  • 6a19309db   drivers/atm: Use DIV_ROUND_UP ... Browse Code »

    The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /
    (d)) but is perhaps more readable.

    In the case of the file drivers/atm/eni.c, I am a little bit suspicious of
    the -1 at the end of the affected expression. Please check that that is
    what is wanted.

    An extract of the semantic patch that makes this change is as follows:
    (http://www.emn.fr/x-info/coccinelle/)

    //
    @haskernel@
    @@

    #include

    @depends on haskernel@
    expression n,d;
    @@

    (
    - (n + d - 1) / d
    + DIV_ROUND_UP(n,d)
    |
    - (n + (d - 1)) / d
    + DIV_ROUND_UP(n,d)
    )

    @depends on haskernel@
    expression n,d;
    @@

    - DIV_ROUND_UP((n),d)
    + DIV_ROUND_UP(n,d)

    @depends on haskernel@
    expression n,d;
    @@

    - DIV_ROUND_UP(n,(d))
    + DIV_ROUND_UP(n,d)
    //

    Signed-off-by: Julia Lawall
    Signed-off-by: Andrew Morton
    Signed-off-by: David S. Miller

    Julia Lawall
     

18 Jul, 2007

1 commit

12 Jul, 2007

1 commit

  • 44c10138f   PCI: Change all drivers to use pci_device->revision ... Browse Code »
    86

    Instead of all drivers reading pci config space to get the revision
    ID, they can now use the pci_device->revision member.

    This exposes some issues where drivers where reading a word or a dword
    for the revision number, and adding useless error-handling around the
    read. Some drivers even just read it for no purpose of all.

    In devices where the revision ID is being copied over and used in what
    appears to be the equivalent of hotpath, I have left the copy code
    and the cached copy as not to influence the driver's performance.

    Compile tested with make all{yes,mod}config on x86_64 and i386.

    Signed-off-by: Auke Kok
    Acked-by: Dave Jones
    Signed-off-by: Greg Kroah-Hartman

    Auke Kok
     

15 Mar, 2007

1 commit

  • ebf88a9e7   [PATCH] zatm __init abuse ... Browse Code »

    zatm_init() and zatm_start() should be __devinit (the former is
    not module init, despite the name - it's a helper for PCI ->probe())

    Signed-off-by: Al Viro
    Acked-by: Jeff Garzik
    Signed-off-by: Linus Torvalds

    Al Viro
     

15 Feb, 2007

1 commit

  • cd354f1ae   [PATCH] remove many unneeded #includes of sched.h ... Browse Code »

    After Al Viro (finally) succeeded in removing the sched.h #include in module.h
    recently, it makes sense again to remove other superfluous sched.h includes.
    There are quite a lot of files which include it but don't actually need
    anything defined in there. Presumably these includes were once needed for
    macros that used to live in sched.h, but moved to other header files in the
    course of cleaning it up.

    To ease the pain, this time I did not fiddle with any header files and only
    removed #includes from .c-files, which tend to cause less trouble.

    Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
    arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
    allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
    configs in arch/arm/configs on arm. I also checked that no new warnings were
    introduced by the patch (actually, some warnings are removed that were emitted
    by unnecessarily included header files).

    Signed-off-by: Tim Schmielau
    Acked-by: Russell King
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Tim Schmielau
     

14 Dec, 2006

1 commit

  • 5cbded585   [PATCH] getting rid of all casts of k[cmz]alloc() calls ... Browse Code »

    Run this:

    #!/bin/sh
    for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do
    echo "De-casting $f..."
    perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f
    done

    And then go through and reinstate those cases where code is casting pointers
    to non-pointers.

    And then drop a few hunks which conflicted with outstanding work.

    Cc: Russell King , Ian Molton
    Cc: Mikael Starvik
    Cc: Yoshinori Sato
    Cc: Roman Zippel
    Cc: Geert Uytterhoeven
    Cc: Ralf Baechle
    Cc: Paul Mackerras
    Cc: Kyle McMartin
    Cc: Benjamin Herrenschmidt
    Cc: Martin Schwidefsky
    Cc: "David S. Miller"
    Cc: Jeff Dike
    Cc: Greg KH
    Cc: Jens Axboe
    Cc: Paul Fulghum
    Cc: Alan Cox
    Cc: Karsten Keil
    Cc: Mauro Carvalho Chehab
    Cc: Jeff Garzik
    Cc: James Bottomley
    Cc: Ian Kent
    Cc: Steven French
    Cc: David Woodhouse
    Cc: Neil Brown
    Cc: Jaroslav Kysela
    Cc: Takashi Iwai
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Robert P. J. Day
     

05 Oct, 2006

1 commit

  • 7d12e780e   IRQ: Maintain regs pointer globally rather than passing to IRQ handlers ... Browse Code »

    Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
    of passing regs around manually through all ~1800 interrupt handlers in the
    Linux kernel.

    The regs pointer is used in few places, but it potentially costs both stack
    space and code to pass it around. On the FRV arch, removing the regs parameter
    from all the genirq function results in a 20% speed up of the IRQ exit path
    (ie: from leaving timer_interrupt() to leaving do_IRQ()).

    Where appropriate, an arch may override the generic storage facility and do
    something different with the variable. On FRV, for instance, the address is
    maintained in GR28 at all times inside the kernel as part of general exception
    handling.

    Having looked over the code, it appears that the parameter may be handed down
    through up to twenty or so layers of functions. Consider a USB character
    device attached to a USB hub, attached to a USB controller that posts its
    interrupts through a cascaded auxiliary interrupt controller. A character
    device driver may want to pass regs to the sysrq handler through the input
    layer which adds another few layers of parameter passing.

    I've build this code with allyesconfig for x86_64 and i386. I've runtested the
    main part of the code on FRV and i386, though I can't test most of the drivers.
    I've also done partial conversion for powerpc and MIPS - these at least compile
    with minimal configurations.

    This will affect all archs. Mostly the changes should be relatively easy.
    Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

    struct pt_regs *old_regs = set_irq_regs(regs);

    And put the old one back at the end:

    set_irq_regs(old_regs);

    Don't pass regs through to generic_handle_irq() or __do_IRQ().

    In timer_interrupt(), this sort of change will be necessary:

    - update_process_times(user_mode(regs));
    - profile_tick(CPU_PROFILING, regs);
    + update_process_times(user_mode(get_irq_regs()));
    + profile_tick(CPU_PROFILING);

    I'd like to move update_process_times()'s use of get_irq_regs() into itself,
    except that i386, alone of the archs, uses something other than user_mode().

    Some notes on the interrupt handling in the drivers:

    (*) input_dev() is now gone entirely. The regs pointer is no longer stored in
    the input_dev struct.

    (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
    something different depending on whether it's been supplied with a regs
    pointer or not.

    (*) Various IRQ handler function pointers have been moved to type
    irq_handler_t.

    Signed-Off-By: David Howells
    (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

    David Howells
     

04 Oct, 2006

2 commits

03 Jul, 2006

1 commit

01 Jul, 2006

1 commit

11 Jan, 2006

1 commit

03 Sep, 2005

1 commit

  • d70063c46   [ATM]: Fix dereference of uninitialized pointer in zatm ... Browse Code »

    Fixing breakage from [NET]: Kill skb->list - original was
    assign vcc
    do a bunch of stuff using ZATM_VCC(vcc)->pool as common subexpression
    Now we do
    int pos = ZATM_VCC(vcc)->pool;
    assign vcc
    do a bunch of stuff
    even though vcc is not even initialized when we enter that block...

    Signed-off-by: Al Viro
    Signed-off-by: David S. Miller

    Al Viro
     

30 Aug, 2005

2 commits

21 Jul, 2005

1 commit

20 Jul, 2005

1 commit

03 Jun, 2005

1 commit

17 Apr, 2005

1 commit

  • 1da177e4c   Linux-2.6.12-rc2 ... Browse Code »

    Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds