08 Feb, 2008
3 commits
-
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (112 commits)
ACPI: fix build warning
Revert "cpuidle: build fix for non-x86"
ACPI: update intrd DSDT override console messages
ACPI: update DSDT override documentation
ACPI: Add "acpi_no_initrd_override" kernel parameter
ACPI: its a directory not a folder....
ACPI: misc cleanups
ACPI: add missing prink prefix strings
ACPI: cleanup acpi.h
ACPICA: fix CONFIG_ACPI_DEBUG_FUNC_TRACE build
ACPI: video: Ignore ACPI video devices that aren't present in hardware
ACPI: video: reset brightness on resume
ACPI: video: call ACPI notifier chain for ACPI video notifications
ACPI: create notifier chain to get hotkey events to graphics driver
ACPI: video: delete unused display switch on hotkey event code
ACPI: video: create "brightness_switch_enabled" modparam
cpuidle: Add a poll_idle method
ACPI: cpuidle: Support C1 idle time accounting
ACPI: enable MWAIT for C1 idle
ACPI: idle: Fix acpi_safe_halt usages and interrupt enabling/disabling
... -
Setup the memory cgroup and add basic hooks and controls to integrate
and work with the cgroup.Signed-off-by: Balbir Singh
Cc: Pavel Emelianov
Cc: Paul Menage
Cc: Peter Zijlstra
Cc: "Eric W. Biederman"
Cc: Nick Piggin
Cc: Kirill Korotaev
Cc: Herbert Poetzl
Cc: David Rientjes
Cc: Vaidyanathan Srinivasan
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
With fixes from David Rientjes
Introduce generic structures and routines for resource accounting.
Each resource accounting cgroup is supposed to aggregate it,
cgroup_subsystem_state and its resource-specific members within.Signed-off-by: Pavel Emelianov
Signed-off-by: Balbir Singh
Cc: Paul Menage
Cc: Peter Zijlstra
Cc: "Eric W. Biederman"
Cc: Nick Piggin
Cc: Kirill Korotaev
Cc: Herbert Poetzl
Cc: Vaidyanathan Srinivasan
Signed-off-by: David Rientjes
Cc: Pavel Emelianov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
07 Feb, 2008
8 commits
-
The basics of DSDT from initramfs. In case this option is selected,
populate_rootfs() is called a bit earlier to have the initramfs content
available during ACPI initialization.This is a very similar path to the one available at
http://gaugusch.at/kernel.shtml but with some update in the
documentation, default set to No and the change of populate_rootfs() the
"Jeff Mahony way" (which avoids reading the initramfs twice).Signed-off-by: Thomas Renninger
Signed-off-by: Eric Piel
Signed-off-by: Len Brown -
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
x86: fix deadlock, make pgd_lock irq-safe
virtio: fix trivial build bug
x86: fix mttr trimming
x86: delay CPA self-test and repeat it
x86: fix 64-bit sections
generic: add __FINITDATA
x86: remove suprious ifdefs from pageattr.c
x86: mark the .rodata section also NX
x86: fix iret exception recovery on 64-bit
cpuidle: dubious one-bit signed bitfield in cpuidle.h
x86: fix sparse warnings in powernow-k8.c
x86: fix sparse error in traps_32.c
x86: trivial sparse/checkpatch in quirks.c
x86 ptrace: disallow null cs/ss
MAINTAINERS: RDC R-321x SoC maintainer
brk randomization: introduce CONFIG_COMPAT_BRK
brk: check the lower bound properly
x86: remove X2 workaround
x86: make spurious fault handler aware of large mappings
x86: make traps on entry code be debuggable in user space, 64-bit -
based on similar patch from: Pavel Machek
Introduce CONFIG_COMPAT_BRK. If disabled then the kernel is free
(but not obliged to) randomize the brk area.Heap randomization breaks ancient binaries, so we keep COMPAT_BRK
enabled by default.Signed-off-by: Ingo Molnar
-
calibrate_delay() must be __cpuinit, not __{dev,}init.
I've verified that this is correct for all users.
While doing the latter, I also did the following cleanups:
- remove pointless additional prototypes in C files
- ensure all users #includeThis fixes the following section mismatches with CONFIG_HOTPLUG=n,
CONFIG_HOTPLUG_CPU=y:WARNING: vmlinux.o(.text+0x1128d): Section mismatch: reference to .init.text.1:calibrate_delay (between 'check_cx686_slop' and 'set_cx86_reorder')
WARNING: vmlinux.o(.text+0x25102): Section mismatch: reference to .init.text.1:calibrate_delay (between 'smp_callin' and 'cpu_coregroup_map')Signed-off-by: Adrian Bunk
Cc: Ivan Kokshaysky
Cc: Richard Henderson
Cc: "Luck, Tony"
Cc: Ralf Baechle
Cc: Paul Mackerras
Cc: Benjamin Herrenschmidt
Cc: "David S. Miller"
Cc: Thomas Gleixner
Cc: Ingo Molnar
Cc: Christian Zankel
Cc: Heiko Carstens
Cc: Martin Schwidefsky
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Given that init/Makefile includes initramfs.c in the build only if
CONFIG_BLK_DEV_INITRD is defined, there seems to be no point checking for
it yet again.Signed-off-by: Robert P. J. Day
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Ad a proper prototype for migration_init() in include/linux/fs.h
Signed-off-by: Adrian Bunk
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Add a proper prototype for signals_init() in include/linux/signal.h
Signed-off-by: Adrian Bunk
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
- All implementations can be __devinit
- The function prototypes were in asm/timex.h but they all must be the same,
so create a single declaration in linux/timex.h.- uninline the sparc64 version to match the other architectures
- Don't bother #defining ARCH_HAS_READ_CURRENT_TIMER to a particular value.
[ezk@cs.sunysb.edu: fix build]
Cc: "David S. Miller"
Cc: Haavard Skinnemoen
Cc: Thomas Gleixner
Cc: Ingo Molnar
Cc: Andi Kleen
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
06 Feb, 2008
3 commits
-
Signed-off-by: Matt Mackall
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Make /proc/ page monitoring configurable
This puts the following files under an embedded config option:
/proc/pid/clear_refs
/proc/pid/smaps
/proc/pid/pagemap
/proc/kpagecount
/proc/kpageflags[akpm@linux-foundation.org: Kconfig fix]
Signed-off-by: Matt Mackall
Cc: Dave Hansen
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Remove the broken status to CONFIG_TIMERFD.
Signed-off-by: Davide Libenzi
Cc: Michael Kerrisk
Cc: Thomas Gleixner
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
03 Feb, 2008
2 commits
-
Move the instrumentation Kconfig to
arch/Kconfig for architecture dependent options
- oprofile
- kprobesand
init/Kconfig for architecture independent options
- profiling
- markersRemove the "Instrumentation Support" menu. Everything moves to "General setup".
Delete the kernel/Kconfig.instrumentation file.Signed-off-by: Mathieu Desnoyers
Cc: Linus Torvalds
Cc:
Signed-off-by: Sam Ravnborg -
Puts the content of arch/Kconfig in the "General setup" menu.
Linus:
> Should it come with a re-duplication of it's content into each
> architecture, which was the case previously ? The oprofile and kprobes
> menu entries were litteraly cut and pasted from one architecture to
> another. Should we put its content in init/Kconfig then ?I don't think it's a good idea to go back to making it per-architecture,
although that extensive "depends on " might
indicate that there certainly is room for cleanup there.And I don't think it's wrong keeping it in kernel/Kconfig.xyz per se, I
just think it's wrong to (a) lump the code together when it really doesn't
necessarily need to and (b) show it to users as some kind of choice that
is tied together (whether it then has common code or not).On the per-architecture side, I do think it would be better to *not* have
internal architecture knowledge in a generic file, and as such a line likedepends on X86_32 || IA64 || PPC || S390 || SPARC64 || X86_64 || AVR32
really shouldn't exist in a file like kernel/Kconfig.instrumentation.
It would be much better to do
depends on ARCH_SUPPORTS_KPROBES
in that generic file, and then architectures that do support it would just
have abool ARCH_SUPPORTS_KPROBES
default yin *their* architecture files. That would seem to be much more logical,
and is readable both for arch maintainers *and* for people who have no
clue - and don't care - about which architecture is supposed to support
which interface...Sam Ravnborg:
Stuff it into a new file: arch/Kconfig
We can then extend this file to include all the 'trailing'
Kconfig things that are anyway equal for all ARCHs.But it should be kept clean - so if we introduce such a file
then we should use ARCH_HAS_whatever in the arch specific Kconfig
files to enable stuff that is not shared.[...]
The above suggestion is actually not exactly the best way to do it...
First the naming..
A quick grep shows following usage today (in Kconfig files)
ARCH_HAS 51
ARCH_SUPPORTS 4
HAVE_ARCH 7ARCH_HAS is the clear winner.
In the common Kconfig file do:
config FOO
depends on ARCH_HAS_FOO
bool "bla bla"config ARCH_HAS_FOO
def_bool nIn the arch specific Kconfig file in a suitable place do:
config SUITABLE_OPTION
select ARCH_HAS_FOOThe naming of ARCH_HAS_ is fixed and shall be:
ARCH_HAS_Only a single line added pr. architecture.
And we will end up with a (maybe even commented) list of trivial selects.- Yet another update :
Moving to HAVE_* now.
Signed-off-by: Mathieu Desnoyers
Cc: Jeff Dike
Cc: David Howells
Cc: Ananth N Mavinakayanahalli
Signed-off-by: Sam Ravnborg
01 Feb, 2008
1 commit
-
This patch supplies help text for the "RCU implementation type"
kernel configuration choice.Reported-by: Stefan Richter
Signed-off-by: Paul E. McKenney
Signed-off-by: Ingo Molnar
30 Jan, 2008
4 commits
-
get more testing of the c_p_a() code done by not turning off
PSE on DEBUG_PAGEALLOC.this simplifies the early pagetable setup code, and tests
the largepage-splitup code quite heavily.In the end, all the largepages will be split up pretty quickly,
so there's no difference to how DEBUG_PAGEALLOC worked before.Signed-off-by: Ingo Molnar
Signed-off-by: Thomas Gleixner -
Signed-off-by: Ingo Molnar
Signed-off-by: Thomas Gleixner -
On VMs implemented using JITs that cache translated code changing the lock
prefixes is a quite costly operation that forces the JIT to throw away and
retranslate a lot of code.Previously a SMP kernel would rewrite the locks once for each CPU which
is quite unnecessary. This patch changes the code to never switch at boot in
the normal case (SMP kernel booting with >1 CPU) or only once for SMP kernel
on UP.This makes a significant difference in boot up performance on AMD SimNow!
Also I expect it to be a little faster on native systems too because a smp
switch does a lot of text_poke()s which each synchronize the pipeline.v1->v2: Rename max_cpus
v1->v2: Fix off by one in UP check (Thomas Gleixner)Signed-off-by: Andi Kleen
Signed-off-by: Ingo Molnar
Signed-off-by: Thomas Gleixner -
The use of the __GENERIC_PERCPU is a bit problematic since arches
may want to run their own percpu setup while using the generic
percpu definitions. Replace it through a kconfig variable.Cc: Rusty Russell
Cc: Andi Kleen
Signed-off-by: Christoph Lameter
Signed-off-by: Mike Travis
Signed-off-by: Thomas Gleixner
Signed-off-by: Ingo Molnar
29 Jan, 2008
1 commit
-
Use the environment option to provide the ARCH symbol
and the KERNELVERSION symbol.Signed-off-by: Roman Zippel
Signed-off-by: Sam Ravnborg
28 Jan, 2008
1 commit
-
Support syscall auditing..
Signed-off-by: Yuichi Nakamura
Signed-off-by: Paul Mundt
26 Jan, 2008
3 commits
-
This patch implements a new version of RCU which allows its read-side
critical sections to be preempted. It uses a set of counter pairs
to keep track of the read-side critical sections and flips them
when all tasks exit read-side critical section. The details
of this implementation can be found in this paper -http://www.rdrop.com/users/paulmck/RCU/OLSrtRCU.2006.08.11a.pdf
and the article-
http://lwn.net/Articles/253651/
This patch was developed as a part of the -rt kernel development and
meant to provide better latencies when read-side critical sections of
RCU don't disable preemption. As a consequence of keeping track of RCU
readers, the readers have a slight overhead (optimizations in the paper).
This implementation co-exists with the "classic" RCU implementations
and can be switched to at compiler.Also includes RCU tracing summarized in debugfs.
[ akpm@linux-foundation.org: build fixes on non-preempt architectures ]
Signed-off-by: Gautham R Shenoy
Signed-off-by: Dipankar Sarma
Signed-off-by: Paul E. McKenney
Reviewed-by: Steven Rostedt
Signed-off-by: Ingo Molnar -
This patch implements a Refcount + Waitqueue based model for
cpu-hotplug.Now, a thread which wants to prevent cpu-hotplug, will bump up a global
refcount and the thread which wants to perform a cpu-hotplug operation
will block till the global refcount goes to zero.The readers, if any, during an ongoing cpu-hotplug operation are blocked
until the cpu-hotplug operation is over.Signed-off-by: Gautham R Shenoy
Signed-off-by: Paul Jackson [For !CONFIG_HOTPLUG_CPU ]
Signed-off-by: Ingo Molnar -
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
selinux: make mls_compute_sid always polyinstantiate
security/selinux: constify function pointer tables and fields
security: add a secctx_to_secid() hook
security: call security_file_permission from rw_verify_area
security: remove security_sb_post_mountroot hook
Security: remove security.h include from mm.h
Security: remove security_file_mmap hook sparse-warnings (NULL as 0).
Security: add get, set, and cloning of superblock security information
security/selinux: Add missing "space"
25 Jan, 2008
3 commits
-
Make SYSFS_DEPRECATED depend on SYSFS since files that check
CONFIG_SYSFS_DEPRECATED don't check for CONFIG_SYSFS first.
Also don't prompt user about SYSFS_DEPRECATED if SYSFS=n.Signed-off-by: Randy Dunlap
Signed-off-by: Greg Kroah-Hartman -
This moves the block devices to /sys/class/block. It will create a
flat list of all block devices, with the disks and partitions in one
directory. For compatibility /sys/block is created and contains symlinks
to the disks./sys/class/block
|-- sda -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
|-- sda1 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1
|-- sda10 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda10
|-- sda5 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5
|-- sda6 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6
|-- sda7 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7
|-- sda8 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda8
|-- sda9 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda9
`-- sr0 -> ../../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0/sys/block/
|-- sda -> ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
`-- sr0 -> ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0Signed-off-by: Kay Sievers
Signed-off-by: Greg Kroah-Hartman -
The security_sb_post_mountroot() hook is long-since obsolete, and is
fundamentally broken: it is never invoked if someone uses initramfs.
This is particularly damaging, because the existence of this hook has
been used as motivation for not using initramfs.Stephen Smalley confirmed on 2007-07-19 that this hook was originally
used by SELinux but can now be safely removed:http://marc.info/?l=linux-kernel&m=118485683612916&w=2
Cc: Stephen Smalley
Cc: James Morris
Cc: Eric Paris
Cc: Chris Wright
Signed-off-by: H. Peter Anvin
Signed-off-by: James Morris
03 Jan, 2008
1 commit
-
Both SLUB and SLAB really did almost exactly the same thing for
/proc/slabinfo setup, using duplicate code and per-allocator #ifdef's.This just creates a common CONFIG_SLABINFO that is enabled by both SLUB
and SLAB, and shares all the setup code. Maybe SLOB will want this some
day too.Reviewed-by: Pekka Enberg
Signed-off-by: Linus Torvalds
07 Dec, 2007
1 commit
03 Dec, 2007
1 commit
-
Commit cfb5285660aad4931b2ebbfa902ea48a37dfffa1 removed a useful feature for
us, which provided a cpu accounting resource controller. This feature would be
useful if someone wants to group tasks only for accounting purpose and doesnt
really want to exercise any control over their cpu consumption.The patch below reintroduces the feature. It is based on Paul Menage's
original patch (Commit 62d0df64065e7c135d0002f069444fbdfc64768f), with
these differences:- Removed load average information. I felt it needs more thought (esp
to deal with SMP and virtualized platforms) and can be added for
2.6.25 after more discussions.
- Convert group cpu usage to be nanosecond accurate (as rest of the cfs
stats are) and invoke cpuacct_charge() from the respective scheduler
classes
- Make accounting scalable on SMP systems by splitting the usage
counter to be per-cpu
- Move the code from kernel/cpu_acct.c to kernel/sched.c (since the
code is not big enough to warrant a new file and also this rightly
needs to live inside the scheduler. Also things like accessing
rq->lock while reading cpu usage becomes easier if the code lived in
kernel/sched.c)The patch also modifies the cpu controller not to provide the same accounting
information.Tested-by: Balbir Singh
Tested the patches on top of 2.6.24-rc3. The patches work fine. Ran
some simple tests like cpuspin (spin on the cpu), ran several tasks in
the same group and timed them. Compared their time stamps with
cpuacct.usage.Signed-off-by: Srivatsa Vaddagiri
Signed-off-by: Balbir Singh
Signed-off-by: Ingo Molnar
23 Nov, 2007
1 commit
-
Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu
21 Nov, 2007
1 commit
-
Add appropriate freezer annotations to handle_initrd(), so that it's possible
to resume from disk from an initrd.http://bugzilla.kernel.org/show_bug.cgi?id=9345
Signed-off-by: Rafael J. Wysocki
Cc: Pavel Machek
Cc: Nigel Cunningham
Cc: Ingo Molnar
Cc: Chris Friedhoff
Signed-off-by: Len Brown
15 Nov, 2007
2 commits
-
This is my trivial patch to swat innumerable little bugs with a single
blow.After some intensive review (my apologies for not having gotten to this
sooner) what we have looks like a good base to build on with the current
pid namespace code but it is not complete, and it is still much to simple
to find issues where the kernel does the wrong thing outside of the initial
pid namespace.Until the dust settles and we are certain we have the ABI and the
implementation is as correct as humanly possible let's keep process ID
namespaces behind CONFIG_EXPERIMENTAL.Allowing us the option of fixing any ABI or other bugs we find as long as
they are minor.Allowing users of the kernel to avoid those bugs simply by ensuring their
kernel does not have support for multiple pid namespaces.[akpm@linux-foundation.org: coding-style cleanups]
Signed-off-by: Eric W. Biederman
Cc: Cedric Le Goater
Cc: Adrian Bunk
Cc: Jeremy Fitzhardinge
Cc: Kir Kolyshkin
Cc: Kirill Korotaev
Cc: Pavel Emelyanov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Revert 62d0df64065e7c135d0002f069444fbdfc64768f.
This was originally intended as a simple initial example of how to create a
control groups subsystem; it wasn't intended for mainline, but I didn't make
this clear enough to Andrew.The CFS cgroup subsystem now has better functionality for the per-cgroup usage
accounting (based directly on CFS stats) than the "usage" status file in this
patch, and the "load" status file is rather simplistic - although having a
per-cgroup load average report would be a useful feature, I don't believe this
patch actually provides it. If it gets into the final 2.6.24 we'd probably
have to support this interface for ever.Cc: Paul Menage
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
10 Nov, 2007
1 commit
-
This patch adds a proper prototype for migration_init() in
include/linux/sched.hSince there's no point in always returning 0 to a caller that doesn't check
the return value it also changes the function to return void.Signed-off-by: Adrian Bunk
Signed-off-by: Andrew Morton
Signed-off-by: Ingo Molnar
25 Oct, 2007
1 commit
-
mark CONFIG_FAIR_GROUP_SCHED as !EXPERIMENTAL. All bugs have been
fixed and it's perfect ;-)Signed-off-by: Ingo Molnar
21 Oct, 2007
1 commit
-
New kind of audit rule predicates: "object is visible in given subtree".
The part that can be sanely implemented, that is. Limitations:
* if you have hardlink from outside of tree, you'd better watch
it too (or just watch the object itself, obviously)
* if you mount something under a watched tree, tell audit
that new chunk should be added to watched subtrees
* if you umount something in a watched tree and it's still mounted
elsewhere, you will get matches on events happening there. New command
tells audit to recalculate the trees, trimming such sources of false
positives.Note that it's _not_ about path - if something mounted in several places
(multiple mount, bindings, different namespaces, etc.), the match does
_not_ depend on which one we are using for access.Signed-off-by: Al Viro
20 Oct, 2007
1 commit
-
Spelling fix in init/.
Signed-off-by: Simon Arlott
Signed-off-by: Adrian Bunk
