25 Dec, 2008
8 commits
-
Use KM_SOFTIRQ instead of KM_IRQ in tasklet context.
Added bug_on on input no-page condition.Signed-off-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
Fix queue management. Change ring size and perform its check not
one after another descriptor, but using stored pointers to the last
checked descriptors.Signed-off-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
Signed-off-by: Patrick McHardy
Signed-off-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
Signed-off-by: Patrick McHardy
Signed-off-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
HIFN uses the transform context to store per-request data, which breaks
when more than one request is outstanding. Move per request members from
struct hifn_context to a new struct hifn_request_context and convert
the code to use this.Signed-off-by: Patrick McHardy
Signed-off-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
Signed-off-by: Patrick McHardy
Signed-off-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
Signed-off-by: Patrick McHardy
Signed-off-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
On Tue, Sep 23, 2008 at 08:06:32PM +0200, Dimitri Puzin (max@psycast.de) wrote:
> With this patch applied it still doesn't work as expected. The overflow
> messages are gone however syslog shows
> [ 120.924266] hifn0: abort: c: 0, s: 1, d: 0, r: 0.
> when doing cryptsetup luksFormat as in original e-mail. At this point
> cryptsetup hangs and can't be killed with -SIGKILL. I've attached
> SysRq-t dump of this condition.Yes, I was wrong with the patch: HIFN does not support 64-bit addresses
afaics.Attached patch should not allow HIFN to be registered on 64-bit arch, so
crypto layer will fallback to the software algorithms.Signed-off-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu
10 Jul, 2008
13 commits
-
Signed-off-by: Robert P. J. Day
Signed-off-by: Herbert Xu -
Removed duplicated include file .
Signed-off-by: Huang Weiyi
Signed-off-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
The descriptors need to be invalidated after processing for ring
cleanup to work properly and to avoid using an old destination
descriptor when the src and cmd descriptors are already set up
and the dst descriptor isn't.Signed-off-by: Patrick McHardy
Acked-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
Move command descriptor setup to seperate function as preparation
for the following DMA setup fixes.Note 1: also fix a harmless typo while moving it: sa_idx is initialized
to dma->resi instead of dma->cmdi.Note 2: errors from command descriptor setup are not propagated back,
anymore, they can't be handled anyway and all conditions leading
to errors should be checked earlier.Signed-off-by: Patrick McHardy
Acked-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
All but the last element of the command and result descriptor rings can be
used for crypto requests, fix HIFN_QUEUE_LENGTH.Signed-off-by: Patrick McHardy
Acked-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
For combined modes like cbc(aes) the driver is responsible for
initializing ivsize.Signed-off-by: Patrick McHardy
Signed-off-by: Herbert Xu -
When the CryptoAPI instantiates a new algorithm, it performs a lookup
by driver name. Since hifn uses the same name for all modes of one
algorithm, the lookup may return an incorrect algorithm.Change the name to use -- to provide unique
names for the different combinations and devices.Signed-off-by: Patrick McHardy
Acked-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
The scatterlist may contain more data than the crypto request, causing
an underflow of the remaining byte count while walking the list.Use the minimum of the scatterlist element size and the remaining byte
count specified in the crypto request to avoid this.Signed-off-by: Patrick McHardy
Acked-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
The check for misalignment of the scatterlist data has two bugs:
- the source buffer doesn't need to be aligned at all
- the destination buffer and its size needs to be aligned to a multiple
of 4, not to the crypto alg blocksizeIntroduce symbolic constant for destination buffer alignment requirements,
use it instead of the crypto alg blocksize and remove the unnecessary
checks for source buffer alignment and change cra_alignmask to zero.Signed-off-by: Patrick McHardy
Signed-off-by: Herbert Xu -
ablkcipher_walk may return a negative error value, handle this properly
instead of treating it as a huge number of scatter-gather elements.Signed-off-by: Patrick McHardy
Acked-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
hifn_setup_crypto() needs to return -EINPROGRESS on success to indicate
asynchronous processing to the crypto API. This also means it must not
return the errno code returned by hifn_process_queue(), if any.Signed-off-by: Patrick McHardy
Signed-off-by: Herbert Xu -
Without debugging this spams the log with "printk: N messages surpressed"
without any actual messages on error. With debugging its more useful to
always see the message.Signed-off-by: Patrick McHardy
Acked-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
HIFN uses little-endian by default, move cpu_to_le32 conversion to hifn_write_0/
hifn_write_1, add sparse annotations and fix an invalid endian conversion in
hifn_setup_src_desc.Signed-off-by: Patrick McHardy
Acked-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu
31 Mar, 2008
1 commit
-
NB: remaining endianness warnings in the file are, AFAICS, real bugs.
Signed-off-by: Al Viro
Signed-off-by: Linus Torvalds
15 Feb, 2008
1 commit
-
The CRYPTO_DEV_HIFN_795X_RNG ifdefs are missing the CONFIG_ prefix.
Signed-off-by: Patrick McHardy
Signed-off-by: Herbert Xu
26 Jan, 2008
1 commit
-
Currently it is possible to select HW_RANDOM as a module and have
hifn795x built-in. This causes a build problem because hifn795x
will then call hwrng_register which isn't built-in.This patch introduces a new config option to control the hifn795x
RNG which lets us avoid this problem.Signed-off-by: Herbert Xu
11 Jan, 2008
8 commits
-
Signed-off-by: Alexey Dobriyan
Signed-off-by: Herbert Xu -
Signed-off-by: Patrick McHardy
Acked-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
The current PLL initalization has a number of deficiencies:
- uses fixed multiplier of 8, which overclocks the chip when using a
reference clock that operates at frequencies above 33MHz. According
to a comment in the BSD source, this is true for the external clock
on almost all every board.- writes to a reserved bit
- doesn't follow the initialization procedure specified in chapter
6.11.1 of the HIFN hardware users guide- doesn't allow to use the PCI clock
This patch adds a module parameter to specify the reference clock
(pci or external) and its frequency and uses that to calculate the
optimum multiplier to reach the maximal speed. By default it uses
the external clock and assumes a speed of 66MHz, which effectively
halfs the frequency currently used.Signed-off-by: Patrick McHardy
Acked-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
Up until now we have ablkcipher algorithms have been identified as
type BLKCIPHER with the ASYNC bit set. This is suboptimal because
ablkcipher refers to two things. On the one hand it refers to the
top-level ablkcipher interface with requests. On the other hand it
refers to and algorithm type underneath.As it is you cannot request a synchronous block cipher algorithm
with the ablkcipher interface on top. This is a problem because
we want to be able to eventually phase out the blkcipher top-level
interface.This patch fixes this by making ABLKCIPHER its own type, just as
we have distinct types for HASH and DIGEST. The type it associated
with the algorithm implementation only.Which top-level interface is used for synchronous block ciphers is
then determined by the mask that's used. If it's a specific mask
then the old blkcipher interface is given, otherwise we go with the
new ablkcipher interface.Signed-off-by: Herbert Xu
-
alpha:
drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk_init':
drivers/crypto/hifn_795x.c:1231: error: implicit declaration of function 'sg_init_table'
drivers/crypto/hifn_795x.c:1243: error: implicit declaration of function 'sg_set_page'
drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk_exit':
drivers/crypto/hifn_795x.c:1257: error: implicit declaration of function 'sg_page'
drivers/crypto/hifn_795x.c:1257: warning: passing argument 1 of '__free_pages' makes pointer from integer without a cast
drivers/crypto/hifn_795x.c: In function 'ablkcipher_add':
drivers/crypto/hifn_795x.c:1278: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast
drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk':
drivers/crypto/hifn_795x.c:1336: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast
drivers/crypto/hifn_795x.c: In function 'hifn_setup_session':
drivers/crypto/hifn_795x.c:1465: warning: assignment makes pointer from integer without a cast
drivers/crypto/hifn_795x.c:1469: warning: assignment makes pointer from integer without a cast
drivers/crypto/hifn_795x.c:1472: warning: assignment makes pointer from integer without a cast
drivers/crypto/hifn_795x.c: In function 'ablkcipher_get':
drivers/crypto/hifn_795x.c:1593: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast
{standard input}: Assembler messages:
{standard input}:7: Warning: setting incorrect section attributes for .got
drivers/crypto/hifn_795x.c: In function 'hifn_process_ready':
drivers/crypto/hifn_795x.c:1653: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast
drivers/crypto/hifn_795x.c: In function 'hifn_probe':
drivers/crypto/hifn_795x.c:2438: error: 'DMA_32BIT_MASK' undeclared (first use in this function)
drivers/crypto/hifn_795x.c:2438: error: (Each undeclared identifier is reported only once
drivers/crypto/hifn_795x.c:2438: error: for each function it appears in.)
drivers/crypto/hifn_795x.c:2443: warning: format '%d' expects type 'int', but argument 4 has type 'long int'
drivers/crypto/hifn_795x.c:2443: warning: format '%d' expects type 'int', but argument 4 has type 'long int'Signed-off-by: Andrew Morton
Signed-off-by: Herbert Xu -
This patch forces HIFN driver to invoke crypto request callbacks from
tasklet (softirq context) instead of hardirq context, since network
stack expects it to be called from bottom halves.It is done by simply scheduling callback invocation via dedicated
tasklet. Workqueue solution was dropped because of tooo slow
rescheduling performance (7 times slower than tasklet, for mode details
one can check this link:
http://tservice.net.ru/~s0mbre/blog/devel/other/2007_11_09.html).Driver passed all AES and DES tests in tcryt.c module.
Signed-off-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
HIFN driver update to use DES weak key checks (exported in this patch).
Signed-off-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu -
This is a driver for HIFN 795x crypto accelerator chips.
It passed all tests for AES, DES and DES3_EDE except weak test for DES,
since hardware can not determine weak keys.Signed-off-by: Evgeniy Polyakov
Signed-off-by: Herbert Xu
