21 Dec, 2011

1 commit


03 Jul, 2011

7 commits

  • C0 silicon updates the pci revision id and requires new AFE parameters
    for phy signal integrity. Support for previous silicon revisions is
    deprecated (it's also broken for the theoretical case of multiple
    controllers at different silicon revisions, all the more reason to get
    it removed as soon as possible)

    Signed-off-by: Adam Gruchala
    [fixed up deprecated silicon support]
    Signed-off-by: Dan Williams

    Adam Gruchala
     
  • The element_length is 2 bytes.

    Reported-by: Yinghai Lu
    Acked-by: Dave Jiang
    Signed-off-by: Dan Williams

    Dan Williams
     
  • The original apc mode definition is the correct one, the fix from commit
    4711ba10 "isci: fix oem parameter initialization and mode detection" was based
    on a typo from a specification update.

    Signed-off-by: Dan Williams

    Dan Williams
     
  • 1/ Since commit 858d4aa7 "isci: Move firmware loading to per PCI device" we have
    been silently falling back to built-in defaults for the parameter settings by
    skipping the call to scic_oem_parameters_set().

    2/ The afe parameters from the firmware were not being honored

    3/ The latest oem parameter definition flips the mode_type values which are
    now 0: for APC 1: for MPC. For APC we need to make sure all the phys
    default to the same address otherwise strict_wide_ports will cause duplicate
    domains.

    4/ Fix up the driver announcement to indicate the source of the
    parameters.

    5/ Fix up the sas addresses to be unique per controller (in the fallback case)

    Signed-off-by: Dave Jiang
    Signed-off-by: Dan Williams

    Dan Williams
     
  • 1/ add OEM paramater support for mode_type (MPC vs APC)
    2/ add OEM parameter support for max_number_concurrent_device_spin_up
    3/ cleanup scic_sds_controller_start_next_phy

    todo: hook up the amp control afe parameters into the afe init code

    Signed-off-by: Henryk Dembkowski
    Signed-off-by: Jacek Danecki
    [cleaned up scic_sds_controller_start_next_phy]
    Signed-off-by: Dan Williams

    Henryk Dembkowski
     
  • We need to scan the OROM for signature and grab the OEM parameters. We
    also need to do the same for EFI. If all fails then we resort to user
    binary blob, and if that fails then we go to the defaults.

    Share the format with the create_fw utility so that all possible sources
    of the parameters are in-sync.

    Signed-off-by: Dave Jiang
    Signed-off-by: Dan Williams

    Dan Williams
     
  • Support for the up to 2x4-port 6Gb/s SAS controllers embedded in the
    chipset.

    This is a snapshot of the first publicly available version of the driver,
    commit 4c1db2d0 in the 'historical' branch.

    git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git historical

    Signed-off-by: Maciej Trela
    Signed-off-by: Dave Jiang
    Signed-off-by: Edmund Nadolski
    Signed-off-by: Dan Williams

    Dan Williams
     

01 Apr, 2011

1 commit

  • To fix bugs when running offloaded FCoE/iSCSI traffic in multiple
    Class of Service environments. In some scenarios, traffic could stop
    on certain rings and eventually all traffic would stop.

    Signed-off-by: Dmitry Kravkov
    Signed-off-by: Michael Chan
    Signed-off-by: David S. Miller

    Dmitry Kravkov
     

15 Mar, 2011

1 commit

  • Update 5709 mips firmware to 6.2.1a to fix iSCSI performance
    regression. There was an unnecessary context read in the fast path
    affecting performance.

    Update bnx2 to 2.1.6.

    Signed-off-by: Michael Chan
    Signed-off-by: David S. Miller

    Michael Chan
     

14 Jan, 2011

1 commit


01 Jan, 2011

1 commit

  • Update MIPS firmware to 6.2.1, with improved small packet performance
    in RSS mode, and iSCSI CID allocation bug fix on 5708.

    Update driver version to 2.0.21.

    Signed-off-by: Michael Chan
    Signed-off-by: David S. Miller

    Michael Chan
     

17 Dec, 2010

3 commits


27 Oct, 2010

1 commit

  • ihex firmwares can include a jump address for starting execution. Add a
    -j option which will cause this to be written into the generated file as a
    record with address zero and data consisting of the address to jump to,
    allowing drivers to make use of this information.

    This format is chosen because it most closely follows the original ihex
    format, though it may make more sense to write a record with length zero
    and the address stored as the address. The records are not omitted by
    default since our ihex format does not include record type information and
    so including additional records may lead to confusion.

    Signed-off-by: Mark Brown
    Cc: David Woodhouse
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Mark Brown
     

25 Oct, 2010

1 commit

  • * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
    Update broken web addresses in arch directory.
    Update broken web addresses in the kernel.
    Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
    Revert "Fix typo: configuation => configuration" partially
    ida: document IDA_BITMAP_LONGS calculation
    ext2: fix a typo on comment in ext2/inode.c
    drivers/scsi: Remove unnecessary casts of private_data
    drivers/s390: Remove unnecessary casts of private_data
    net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
    drivers/infiniband: Remove unnecessary casts of private_data
    drivers/gpu/drm: Remove unnecessary casts of private_data
    kernel/pm_qos_params.c: Remove unnecessary casts of private_data
    fs/ecryptfs: Remove unnecessary casts of private_data
    fs/seq_file.c: Remove unnecessary casts of private_data
    arm: uengine.c: remove C99 comments
    arm: scoop.c: remove C99 comments
    Fix typo configue => configure in comments
    Fix typo: configuation => configuration
    Fix typo interrest[ing|ed] => interest[ing|ed]
    Fix various typos of valid in comments
    ...

    Fix up trivial conflicts in:
    drivers/char/ipmi/ipmi_si_intf.c
    drivers/usb/gadget/rndis.c
    net/irda/irnet/irnet_ppp.c

    Linus Torvalds
     

18 Oct, 2010

1 commit

  • The patch below updates broken web addresses in the kernel

    Signed-off-by: Justin P. Mattock
    Cc: Maciej W. Rozycki
    Cc: Geert Uytterhoeven
    Cc: Finn Thain
    Cc: Randy Dunlap
    Cc: Matt Turner
    Cc: Dimitry Torokhov
    Cc: Mike Frysinger
    Acked-by: Ben Pfaff
    Acked-by: Hans J. Koch
    Reviewed-by: Finn Thain
    Signed-off-by: Jiri Kosina

    Justin P. Mattock
     

12 Oct, 2010

1 commit

  • - Improved flow control and simplified interface
    - Use hardware RSS indirection table instead of the slower firmware-
    based table
    - Lower latency interrupt on 5709

    Signed-off-by: Michael Chan
    Reviewed-by: Benjamin Li
    Signed-off-by: David S. Miller

    Michael Chan
     

07 Oct, 2010

5 commits


20 Aug, 2010

1 commit


17 Aug, 2010

1 commit

  • It doesn't like pattern and explicit rules to be on the same line,
    and it seems to be more picky when matching file (or really directory)
    names with different numbers of trailing slashes.

    Signed-off-by: Jan Beulich
    Acked-by: Sam Ravnborg
    Andrew Benton
    Cc:
    Signed-off-by: Michal Marek

    Jan Beulich
     

05 Aug, 2010

1 commit

  • * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
    phy/marvell: add 88ec048 support
    igb: Program MDICNFG register prior to PHY init
    e1000e: correct MAC-PHY interconnect register offset for 82579
    hso: Add new product ID
    can: Add driver for esd CAN-USB/2 device
    l2tp: fix export of header file for userspace
    can-raw: Fix skb_orphan_try handling
    Revert "net: remove zap_completion_queue"
    net: cleanup inclusion
    phy/marvell: add 88e1121 interface mode support
    u32: negative offset fix
    net: Fix a typo from "dev" to "ndev"
    igb: Use irq_synchronize per vector when using MSI-X
    ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
    e1000e: Fix irq_synchronize in MSI-X case
    e1000e: register pm_qos request on hardware activation
    ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
    net: Add getsockopt support for TCP thin-streams
    cxgb4: update driver version
    cxgb4: add new PCI IDs
    ...

    Manually fix up conflicts in:
    - drivers/net/e1000e/netdev.c: due to pm_qos registration
    infrastructure changes
    - drivers/net/phy/marvell.c: conflict between adding 88ec048 support
    and cleaning up the IDs
    - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
    conflict (registration change vs marking it static)

    Linus Torvalds
     

09 Jul, 2010

1 commit

  • Extract the microcode for the QLogic QLE7220 series IB HCA and use the
    kernel microcode request facility to load the microcode. This
    supports Debian Linux's requirements to separate microcode which
    doesn't have open source code available from the device driver.

    Signed-off-by: Ben Hutchings
    Signed-off-by: Roland Dreier

    Ben Hutchings
     

26 Jun, 2010

1 commit


18 May, 2010

1 commit


03 Mar, 2010

1 commit


18 Feb, 2010

2 commits


17 Feb, 2010

1 commit


07 Jan, 2010

1 commit


06 Nov, 2009

1 commit


30 Oct, 2009

1 commit


15 Oct, 2009

3 commits