09 Jan, 2012
3 commits
-
Signed-off-by: Scott Jiang
Signed-off-by: Bob Liu -
spi sport driver can support any gpio as its cs pin.
Signed-off-by: Scott Jiang
Signed-off-by: Bob Liu -
Macro name for spi controller driver has been modified, so update default
board file accordingly.Signed-off-by: Sonic Zhang
Signed-off-by: Bob Liu
14 Nov, 2011
2 commits
-
Commit 8dc7a9c84 ("blackfin: Add export.h to files using
EXPORT_SYMBOL/THIS_MODULE") inserted some of the include statements into
sections protected by an unrelated #if CONFIG_... statement. This can cause,
depending on the configuration used, warnings like this one:arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: data definition has no type or storage class
arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’
arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: parameter names (without types) in function declarationThis patch fixes it by moving the includes out of the #if protected sections.
Signed-off-by: Lars-Peter Clausen
Acked-by: Mike Frysinger
Signed-off-by: Bob Liu -
The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips,
so move the values to the platform resources.Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger
Signed-off-by: Bob Liu
01 Nov, 2011
1 commit
-
These particular files were just assuming that module.h was
somehow in the include paths. Give them the more minimalist
header file explicitly.Signed-off-by: Paul Gortmaker
26 Oct, 2011
7 commits
-
This flag is a NOOP and can be removed now.
Signed-off-by: Yong Zhang
Acked-by: Bob Liu
Signed-off-by: Mike Frysinger -
Remove i2c_board_info for driver that doesn't exist anymore.
Delete irq_flags for drivers that don't use them anymore.Signed-off-by: Michael Hennerich
Signed-off-by: Mike Frysinger -
Signed-off-by: Lars-Peter Clausen
Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger -
There is already an entry in the spi device table for the codec, but the
modalias was wrong. Also the config symbol name for the codec is wrong,
so this is fixed as well.Signed-off-by: Lars-Peter Clausen
Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger -
Signed-off-by: Lars-Peter Clausen
Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger -
SND_BF5XX_SOC is for machine drivers while SND_SOC is for codec drivers.
Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger -
The ASoC codec name is "ad1836" and not "ad183x" as the change to rename
things ultimately did not get merged.Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger
23 Jul, 2011
4 commits
-
The pcm driver name has been changed, but the device name has not.
Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger -
Signed-off-by: Mike Frysinger
-
The default for the Blackfin SPI driver is 8 bits and dma disabled,
so many of the bfin5xx_spi_chip resources are redundant. So punt
those parts.Further, drivers should themselves be declaring 16 bit transfers,
so for those that do, and for the ones which no longer do 16 bit
transfers, drop the bfin5xx_spi_chip resources.Signed-off-by: Mike Frysinger
-
Signed-off-by: Mike Frysinger
29 May, 2011
1 commit
-
Now that the serial code has been unified in bfin_serial.h, and the
Blackfin UART driver pushed its resources to the boards files, we
don't need these headers anymore.Signed-off-by: Mike Frysinger
28 May, 2011
1 commit
-
* git://git.infradead.org/mtd-2.6: (97 commits)
mtd: kill CONFIG_MTD_PARTITIONS
mtd: remove add_mtd_partitions, add_mtd_device and friends
mtd: convert remaining users to mtd_device_register()
mtd: samsung onenand: convert to mtd_device_register()
mtd: omap2 onenand: convert to mtd_device_register()
mtd: txx9ndfmc: convert to mtd_device_register()
mtd: tmio_nand: convert to mtd_device_register()
mtd: socrates_nand: convert to mtd_device_register()
mtd: sharpsl: convert to mtd_device_register()
mtd: s3c2410 nand: convert to mtd_device_register()
mtd: ppchameleonevb: convert to mtd_device_register()
mtd: orion_nand: convert to mtd_device_register()
mtd: omap2: convert to mtd_device_register()
mtd: nomadik_nand: convert to mtd_device_register()
mtd: ndfc: convert to mtd_device_register()
mtd: mxc_nand: convert to mtd_device_register()
mtd: mpc5121_nfc: convert to mtd_device_register()
mtd: jz4740_nand: convert to mtd_device_register()
mtd: h1910: convert to mtd_device_register()
mtd: fsmc_nand: convert to mtd_device_register()
...Fixed up trivial conflicts in
- drivers/mtd/maps/integrator-flash.c: removed in ARM tree
- drivers/mtd/maps/physmap.c: addition of afs partition probe type
clashing with removal of CONFIG_MTD_PARTITIONS
25 May, 2011
8 commits
-
Now that the Blackfin machine drivers have been updated to the
multicomponent support, update the resources to match. The pin
settings are now a board issue and removed from the driver.Signed-off-by: Scott Jiang
Signed-off-by: Mike Frysinger -
Signed-off-by: Mike Frysinger
-
The BF537 SIC combines the gpio port H mask A interrupts with the
emac rx interrupt, so we need to demux this in software.It also combines the gpio port H mask B and the emac tx interrupts,
and the watchdog and port F mask B interrupts, but since we don't
support mask B yet, just add the defines for now.Signed-off-by: Mike Frysinger
-
The SIC interrupt line muxing that the bf537 does is specific to this
CPU (thankfully), so rip it out of the common code and move it to a
bf537-specific file. This tidies up the common code significantly.Signed-off-by: Mike Frysinger
-
This brings the parts in line with newer ones, and makes things easier
to read at a glance.Signed-off-by: Mike Frysinger
-
These files had a lot of whitespace damage, mostly due to copying and
pasting original files that had damage.The BF561 header also had a lot of unused CONFIG_DEF_xxx defines, so
punt them all.Signed-off-by: Mike Frysinger
-
Start a new common IRQ header and move all of the CEC pieces there. This
lets the individual part headers worry just about its SIC defines.Signed-off-by: Mike Frysinger
-
Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS
preprocessor conditionals as partitioning is always available.Cc: Mike Frysinger
Signed-off-by: Jamie Iles
Signed-off-by: Artem Bityutskiy
Signed-off-by: David Woodhouse
31 Mar, 2011
1 commit
-
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi
18 Mar, 2011
3 commits
-
No code uses these, and the short define names are polluting the global
namespace where they collide with things like common irq files. So just
punt the damned things. If in the future we need HDMA support, we can
make a standalone header for these things.Signed-off-by: Mike Frysinger
-
Signed-off-by: Thomas Gleixner
Signed-off-by: Mike Frysinger -
The board doesn't actually have a pin hooked up to do card detection,
so punt the code for it.Signed-off-by: Andreas Schallenberg
Signed-off-by: Mike Frysinger
14 Jan, 2011
1 commit
-
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
Documentation/trace/events.txt: Remove obsolete sched_signal_send.
writeback: fix global_dirty_limits comment runtime -> real-time
ppc: fix comment typo singal -> signal
drivers: fix comment typo diable -> disable.
m68k: fix comment typo diable -> disable.
wireless: comment typo fix diable -> disable.
media: comment typo fix diable -> disable.
remove doc for obsolete dynamic-printk kernel-parameter
remove extraneous 'is' from Documentation/iostats.txt
Fix spelling milisec -> ms in snd_ps3 module parameter description
Fix spelling mistakes in comments
Revert conflicting V4L changes
i7core_edac: fix typos in comments
mm/rmap.c: fix comment
sound, ca0106: Fix assignment to 'channel'.
hrtimer: fix a typo in comment
init/Kconfig: fix typo
anon_inodes: fix wrong function name in comment
fix comment typos concerning "consistent"
poll: fix a typo in comment
...Fix up trivial conflicts in:
- drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
- fs/ext4/ext4.hAlso fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
10 Jan, 2011
8 commits
-
Signed-off-by: Mike Frysinger
-
Signed-off-by: Andreas Schallenberg
Signed-off-by: Mike Frysinger -
The SPORT/UART driver doesn't use the secondary channel pins, so don't
try and request them thus keeping other drivers from using them.Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger -
Signed-off-by: Mike Frysinger
-
These were only included because of the irq handling of the PLL funcs,
and those PLL funcs have been moved out into their own header now.Signed-off-by: Mike Frysinger
-
The main asm/blackfin.h header will pull in mach/blackfin.h to get
all the fun Blackfin defines. So having any of the sub-mach headers
trying to include asm/blackfin.h makes no sense -- punt it.The mach/blackfin.h header takes care of including the part-specific
def headers which in turn will include any other needed def file.
Similarly, it takes care of pulling in the part-specific cdef header.
So move this logic out of the blackfin.h when necessary.Further, make sure the cdef headers do not waste time including the
def headers again.Since all parts need the common def/cdef headers, move this logic
out of the part-specific headers and into the mach/blackfin.h file.Finally, we need to split the BF539 def header since the BF538 does
not have MXVR and we don't want to expose those MMRs.So now all parts should have the same behavior:
mach/blackfin.h
asm/def_LPBlackfin.h
part-specific def.h
if ! asm
asm/cdef_LPBlackfin.h
part-specific cdef.h
And the sub def/cdef headers only tail into what they need.Signed-off-by: Mike Frysinger
-
Signed-off-by: Mike Frysinger
-
The array of pointers is never written, so constify it.
Signed-off-by: Mike Frysinger