06 Aug, 2011
1 commit
-
This adds backlight control on the Samsung Q10 laptop, which does not support
the SABI interface. Also tested successfully on the Dell Latitude X200.Signed-off-by: Frederick van der Wyck
Signed-off-by: Matthew Garrett
28 May, 2011
2 commits
-
Signed-off-by: Ameya Palande
Signed-off-by: Matthew Garrett -
This driver implements an Extra ACPI EC driver for products based on Intel
Oaktrail platform.This driver does below things:
1. registers itself in the Linux backlight control in
/sys/class/backlight/intel_oaktrail/2. registers in the rfkill subsystem here: /sys/class/rfkill/rfkillX/
for these components: wifi, bluetooth, wwan (3g), gpsSigned-off-by: Yin Kangkai
[Extracted from a bigger patch by Yin Kangkai, this version leaves out some
sysfs bits that probably want to be driver managed, and ACPI i2c enumeration]Signed-off-by: Alan Cox
Signed-off-by: Matthew Garrett
04 May, 2011
1 commit
-
MXM is a laptop graphics card form-factor + interface specification,
this adds an initial stub driver to talk to the MXM WMI interface.The only method used is the MUX switching method needed to do switchable
graphics on the nvidia chipsets.Signed-off-by: Dave Airlie
Acked-by: Matthew Garrett
28 Mar, 2011
8 commits
-
This adds the samsung-laptop driver to the kernel. It now supports
all known Samsung laptops that use the SABI interface.Signed-off-by: Greg Kroah-Hartman
Signed-off-by: Matthew Garrett -
Introduce a new driver for Asus Notebooks shipped with
a WMI device instead of the old ACPI device. The WMI
device is almost the same as the one present in Eee PC,
but the event guid and the keymap are different.The keymap comes from asus-laptop module.
On Asus notebooks, when you call the WMI device, you always
need a 64bit buffer, even if you only want to get the state
of a device (tested on a G73).Signed-off-by: Corentin Chary
Signed-off-by: Matthew Garrett -
New Asus notebooks are using a WMI device similar to
the one used in Eee PCs. Since we don't want to load
eeepc-wmi module on Asus notebooks, and we want to
keep the eeepc-wmi module for backward compatibility,
this patch introduce a new module, named asus-wmi, that
will be used by eeepc-wmi and the new Asus Notebook WMI
Driver.eeepc-wmi's input device strings (device name and phys)
are kept, but rfkill and led names are changed (s/eeepc/asus/).
This should not break anything since rfkill are used by type or
index, not by name, and the eeepc::touchpad led wasn't working
correctly before 2.6.39 anyway.Signed-off-by: Corentin Chary
Signed-off-by: Matthew Garrett -
New Asus notebooks are using a WMI device similar to
the one used in Eee PCs. Since we don't want to load
a module named eeepc-laptop on Asus Notebooks, start by
copying all the code to asus-wmi.c.Signed-off-by: Corentin Chary
Signed-off-by: Matthew Garrett -
This is the basic thermal sensor driver for Intel MID platform using the
Medfield chipset. It plugs in via the thermal drivers and provides sensor
readings for the device sensors.Signed-off-by: Durgadoss R
Signed-off-by: Alan Cox
Signed-off-by: Matthew Garrett -
Enable volume up and down hotkeys on WMI events
GUID 284A0E6B-380E-472A-921F-E52786257FB4 and
GUID 02314822-307C-4F66-bf0E-48AEAEB26CC8.Also works around a firmware bug where the _WED method
should return an integer containing the key code and in fact
the method returns the key code in element zero of a buffer.BugLink: http://bugs.launchpad.net/bugs/701530
BugLink: http://bugs.launchpad.net/bugs/676997Signed-off-by: Colin Ian King
Signed-off-by: Matthew Garrett -
The power button is connected to MSIC on Medfield, we will get two
interrupts from IOAPIC when pressing or releasing the power button.Signed-off-by: Hong Liu
[Minor fixes as noted by Dmitry]
Signed-off-by: Alan Cox
Acked-by: Dmitry Torokhov
Signed-off-by: Matthew Garrett -
The OLPC XO-1.5 has an ebook switch, triggered when the laptop
screen is rotated then folding down, converting the device into ebook
form.This switch is exposed through ACPI. Add a driver that exposes it
to userspace as an input device.Signed-off-by: Daniel Drake
Acked-by: Dmitry Torokhov
Signed-off-by: Matthew Garrett
22 Mar, 2011
1 commit
-
The hp_accel driver isn't a hardware monitoring driver, so it doesn't
belong to drivers/hwmon. Move it to drivers/platform/x86, assuming HP
doesn't ship non-x86 laptops.Signed-off-by: Jean Delvare
Acked-by: Guenter Roeck
Acked-by: Eric Piel
Acked-by: Jonathan Cameron
Tested-by: Eric Piel
Tested-by: Takashi Iwai
08 Jan, 2011
1 commit
-
This driver implements ioctl and interfaces with intel scu ipc driver. It
is used to access pmic/msic registers from user space and firmware update
utility.Signed-off-by: Sreedhara DS
[Extensive clean up and debug]
Signed-off-by: Alan Cox
Signed-off-by: Matthew Garrett
21 Oct, 2010
5 commits
-
After a period of RFC for this driver, I think it is ready
for inclusion in the platform-driver-x86 tree, hopefully to
be staged in the next merge window into Linus's tree.--Vernon
------------------------------------------------------------
IBM Real-Time "SMI Free" mode driver
This driver supports the Real-Time Linux (RTL) BIOS feature.
The RTL feature allows non-fatal System Management Interrupts
(SMIs) to be disabled on supported IBM platforms and is
intended to be coupled with a user-space daemon to monitor
the hardware in a way that can be prioritized and scheduled
to better suit the requirements for the system.The Device is presented as a special "_RTL_" table to the OS
in the Extended BIOS Data Area. There is a simple protocol
for entering and exiting the mode at runtime. This driver
creates a simple sysfs interface to allow a simple entry and
exit from RTL mode in the UFI/BIOS.Since the driver is specific to IBM SystemX hardware (x86-
based servers) it only builds on x86 builds. To reduce the
risk of loading on the wrong hardware, the module uses DMI
information and checks a list of servers that are known to
work.Signed-off-by: Vernon Mauery
Signed-off-by: Matthew Garrett -
Add a software rfkill switch for the WLAN interface in the OLPC XO-1
laptop. It uses the OLPC embedded controller to cut/restore power to
the Marvell WLAN chip on the motherboard.Signed-off-by: Daniel Drake
Signed-off-by: Matthew Garrett -
The hdaps driver isn't a hardware monitoring driver, so it shouldn't
live under driver/hwmon. drivers/platform/x86 seems much more
appropriate, as the driver is only useful on x86 laptops.Signed-off-by: Jean Delvare
Cc: Guenter Roeck
Cc: Matthew Garrett
Cc: Frank Seidel
Signed-off-by: Matthew Garrett -
The makefile didn't get updated when the driver changed name, which broke
the build.Signed-off-by: Matthew Garrett
-
Since the platform drivers doing more for laptops than just using specific
ACPI device. It will be good to change the name from *_acpi to *-laptop.Reference: http://lkml.org/lkml/2010/8/14/154
Signed-off-by: Ike Panhc
Acked-by: Len Brown
Signed-off-by: Matthew Garrett
11 Aug, 2010
1 commit
-
Signed-off-by: David Woodhouse
03 Aug, 2010
3 commits
-
Moorestown has PMIC chip which contains GPIO blocks. The PMIC chip is
connected to Langwell by SPI interface. So this GPIO driver will be regarded
as SPI GPIO expander though the actual GPIO access is through IPC and SRAM.
The SPI master contoller will probe this device driver by parsing SPIB table.Cleaned up for new IPC, GPE removed and some printk and other tidying by
Alan Cox. Fixes for points noted by Matthew GarrettSigned-off-by: Alek Du
Signed-off-by: Alan Cox
Signed-off-by: Matthew Garrett -
We exit staging rar! rar! rar!...
Signed-off-by: Alan Cox
Signed-off-by: Matthew Garrett
Acked-by: Greg Kroah-Hartman -
Intel Core i3/5 platforms with integrated graphics support both CPU and
GPU turbo mode. CPU turbo mode is opportunistic: the CPU will use any
available power to increase core frequencies if thermal headroom is
available. The GPU side is more manual however; the graphics driver
must monitor GPU power and temperature and coordinate with a core
thermal driver to take advantage of available thermal and power headroom
in the package.The intelligent power sharing (IPS) driver is intended to coordinate
this activity by monitoring MCP (multi-chip package) temperature and
power, allowing the CPU and/or GPU to increase their power consumption,
and thus performance, when possible. The goal is to maximize
performance within a given platform's TDP (thermal design point).Signed-off-by: Jesse Barnes
Signed-off-by: Matthew Garrett
18 May, 2010
1 commit
-
The IPC (inter processor communications) is used to provide the
communications between kernel and system control units on some embedded
Intel x86 platforms.(Various bits of clean up and restructuring by Alan Cox)
Signed-off-by: Sreedhara DS
Signed-off-by: Alan Cox
01 Apr, 2010
1 commit
-
Add a WMI driver for Eee PC laptops. Currently it only supports hotkeys.
Signed-off-by: Yong Wang
Signed-off-by: Matthew Garrett
Acked-by: Dmitry Torokhov
24 Dec, 2009
1 commit
-
This add supports for devices like keyboard, backlight, tablet and
accelerometer.This work is supported by International Syst S/A.
[randy.dunlap@oracle.com: cmpc_acpi: depends on ACPI]
[akpm@linux-foundation.org: readability tweaks]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Thadeu Lima de Souza Cascardo
Signed-off-by: Andrew Morton
Signed-off-by: Len Brown
17 Dec, 2009
3 commits
-
This driver serves backlight (including switching) and volume up/down
keys for MSI machines providing a specific wmi interface:
551A1F84-FBDD-4125-91DB-3EA8F44F1D45
B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2Signed-off-by: Thomas Renninger
CC: Carlos Corbacho
CC: Matthew Garrett
Tested-by: Matt Chen
Reviewed-by: Anisse Astier
Signed-off-by: Len Brown -
This patch adds support for the ACPI events generated by the RFKill
switch on modern Toshiba laptops, and re-enables the Bluetooth USB
device when the switch is flipped back to the 'on' position.The RFKill switch brute force pulls out the USB device when flipped to
'off', but it doesn't automatically re-enable it. Without this driver,
the Bluetooth is gone until after a reboot on my Portege R500.Signed-off-by: Jes Sorensen
Signed-off-by: Len Brown
19 Sep, 2009
1 commit
-
This adds Topstar Laptop Extras ACPI driver. It enables hotkeys
functionality with Topstar N01 netbook. Besides hotkeys there are
other functions exposed by its ACPI firmware, but for now only
hotkeys reporting on Topstar N01 is supported. Topstar is a chinese
manufacturer, its website can be currently reached at
http://www.topstardigital.cn/Signed-off-by: Herton Ronaldo Krzesinski
Reviewed-by: Alan Jenkins
Reviewed-by: Bjorn Helgaas
Signed-off-by: Len Brown
24 Jun, 2009
1 commit
-
Acerhdf is a driver for Acer Aspire One netbooks. It allows
to access the temperature sensor and to control the fan.Signed-off-by: Peter Feuerer
Signed-off-by: Andreas Mohr
Signed-off-by: Borislav Petkov
Signed-off-by: Len Brown
04 Apr, 2009
1 commit
-
Add a WMI driver for Dell laptops. Currently it does nothing but send a
generic input event when a button with a picture of a battery on it is
pressed, but maybe other uses will appear over time.Signed-off-by: Matthew Garrett
Cc: Dmitry Torokhov
Signed-off-by: Andrew Morton
Signed-off-by: Len Brown
17 Jan, 2009
1 commit
-
Signed-off-by: Len Brown
19 Dec, 2008
2 commits
-
These are platform specific drivers that happen to use ACPI,
while drivers/acpi/ is for code that implements ACPI itself.Signed-off-by: Len Brown
-
Move x86 platform specific drivers from drivers/misc/
to a new home under drivers/platform/x86/.The community has been maintaining x86 vendor-specific
platform specific drivers under /drivers/misc/ for a few years.
The oldest ones started life under drivers/acpi.
They moved out of drivers/acpi/ because they don't actually
implement the ACPI specification, but either simply
use ACPI, or implement vendor-specific ACPI extensions.In the future we anticipate...
drivers/misc/ will go away.
other architectures will create drivers/platform/Signed-off-by: Len Brown