27 May, 2011

1 commit

  • HARDIRQ_ENTER() maps to irq_enter() which calls rcu_irq_enter().
    But HARDIRQ_EXIT() maps to __irq_exit() which doesn't call
    rcu_irq_exit().

    So for every locking selftest that simulates hardirq disabled,
    we create an imbalance in the rcu extended quiescent state
    internal state.

    As a result, after the first missing rcu_irq_exit(), subsequent
    irqs won't exit dyntick-idle mode after leaving the interrupt
    handler. This means that RCU won't see the affected CPU as being
    in an extended quiescent state, resulting in long grace-period
    delays (as in grace periods extending for hours).

    To fix this, just use __irq_enter() to simulate the hardirq
    context. This is sufficient for the locking selftests as we
    don't need to exit any extended quiescent state or perform
    any check that irqs normally do when they wake up from idle.

    As a side effect, this patch makes it possible to restore
    "rcu: Decrease memory-barrier usage based on semi-formal proof",
    which eventually helped finding this bug.

    Reported-and-tested-by: Yinghai Lu
    Signed-off-by: Frederic Weisbecker
    Cc: Paul E. McKenney
    Cc: Ingo Molnar
    Cc: Peter Zijlstra
    Cc: Stable
    Signed-off-by: Paul E. McKenney

    Frederic Weisbecker
     

13 Mar, 2009

1 commit


08 Dec, 2006

1 commit


04 Jul, 2006

3 commits

  • From: Ingo Molnar

    lockdep so far only allowed read-recursion for the same lock instance.
    This is enough in the overwhelming majority of cases, but a hostap case
    triggered and reported by Miles Lane relies on same-class
    different-instance recursion. So we relax the restriction on read-lock
    recursion.

    (This change does not allow rwsem read-recursion, which is still
    forbidden.)

    Signed-off-by: Ingo Molnar
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Ingo Molnar
     
  • Do 'make oldconfig' and accept all the defaults for new config options -
    reboot into the kernel and if everything goes well it should boot up fine and
    you should have /proc/lockdep and /proc/lockdep_stats files.

    Typically if the lock validator finds some problem it will print out
    voluminous debug output that begins with "BUG: ..." and which syslog output
    can be used by kernel developers to figure out the precise locking scenario.

    What does the lock validator do? It "observes" and maps all locking rules as
    they occur dynamically (as triggered by the kernel's natural use of spinlocks,
    rwlocks, mutexes and rwsems). Whenever the lock validator subsystem detects a
    new locking scenario, it validates this new rule against the existing set of
    rules. If this new rule is consistent with the existing set of rules then the
    new rule is added transparently and the kernel continues as normal. If the
    new rule could create a deadlock scenario then this condition is printed out.

    When determining validity of locking, all possible "deadlock scenarios" are
    considered: assuming arbitrary number of CPUs, arbitrary irq context and task
    context constellations, running arbitrary combinations of all the existing
    locking scenarios. In a typical system this means millions of separate
    scenarios. This is why we call it a "locking correctness" validator - for all
    rules that are observed the lock validator proves it with mathematical
    certainty that a deadlock could not occur (assuming that the lock validator
    implementation itself is correct and its internal data structures are not
    corrupted by some other kernel subsystem). [see more details and conditionals
    of this statement in include/linux/lockdep.h and
    Documentation/lockdep-design.txt]

    Furthermore, this "all possible scenarios" property of the validator also
    enables the finding of complex, highly unlikely multi-CPU multi-context races
    via single single-context rules, increasing the likelyhood of finding bugs
    drastically. In practical terms: the lock validator already found a bug in
    the upstream kernel that could only occur on systems with 3 or more CPUs, and
    which needed 3 very unlikely code sequences to occur at once on the 3 CPUs.
    That bug was found and reported on a single-CPU system (!). So in essence a
    race will be found "piecemail-wise", triggering all the necessary components
    for the race, without having to reproduce the race scenario itself! In its
    short existence the lock validator found and reported many bugs before they
    actually caused a real deadlock.

    To further increase the efficiency of the validator, the mapping is not per
    "lock instance", but per "lock-class". For example, all struct inode objects
    in the kernel have inode->inotify_mutex. If there are 10,000 inodes cached,
    then there are 10,000 lock objects. But ->inotify_mutex is a single "lock
    type", and all locking activities that occur against ->inotify_mutex are
    "unified" into this single lock-class. The advantage of the lock-class
    approach is that all historical ->inotify_mutex uses are mapped into a single
    (and as narrow as possible) set of locking rules - regardless of how many
    different tasks or inode structures it took to build this set of rules. The
    set of rules persist during the lifetime of the kernel.

    To see the rough magnitude of checking that the lock validator does, here's a
    portion of /proc/lockdep_stats, fresh after bootup:

    lock-classes: 694 [max: 2048]
    direct dependencies: 1598 [max: 8192]
    indirect dependencies: 17896
    all direct dependencies: 16206
    dependency chains: 1910 [max: 8192]
    in-hardirq chains: 17
    in-softirq chains: 105
    in-process chains: 1065
    stack-trace entries: 38761 [max: 131072]
    combined max dependencies: 2033928
    hardirq-safe locks: 24
    hardirq-unsafe locks: 176
    softirq-safe locks: 53
    softirq-unsafe locks: 137
    irq-safe locks: 59
    irq-unsafe locks: 176

    The lock validator has observed 1598 actual single-thread locking patterns,
    and has validated all possible 2033928 distinct locking scenarios.

    More details about the design of the lock validator can be found in
    Documentation/lockdep-design.txt, which can also found at:

    http://redhat.com/~mingo/lockdep-patches/lockdep-design.txt

    [bunk@stusta.de: cleanups]
    Signed-off-by: Ingo Molnar
    Signed-off-by: Arjan van de Ven
    Signed-off-by: Adrian Bunk
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Ingo Molnar
     
  • Introduce DEBUG_LOCKING_API_SELFTESTS, which uses the generic lock debugging
    code's silent-failure feature to run a matrix of testcases. There are 210
    testcases currently:

    +-----------------------
    | Locking API testsuite:
    +------------------------------+------+------+------+------+------+------+
    | spin |wlock |rlock |mutex | wsem | rsem |
    -------------------------------+------+------+------+------+------+------+
    A-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
    A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
    A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
    double unlock: ok | ok | ok | ok | ok | ok |
    bad unlock order: ok | ok | ok | ok | ok | ok |
    --------------------------------------+------+------+------+------+------+
    recursive read-lock: | ok | | ok |
    --------------------------------------+------+------+------+------+------+
    non-nested unlock: ok | ok | ok | ok |
    --------------------------------------+------+------+------+
    hard-irqs-on + irq-safe-A/12: ok | ok | ok |
    soft-irqs-on + irq-safe-A/12: ok | ok | ok |
    hard-irqs-on + irq-safe-A/21: ok | ok | ok |
    soft-irqs-on + irq-safe-A/21: ok | ok | ok |
    sirq-safe-A => hirqs-on/12: ok | ok | ok |
    sirq-safe-A => hirqs-on/21: ok | ok | ok |
    hard-safe-A + irqs-on/12: ok | ok | ok |
    soft-safe-A + irqs-on/12: ok | ok | ok |
    hard-safe-A + irqs-on/21: ok | ok | ok |
    soft-safe-A + irqs-on/21: ok | ok | ok |
    hard-safe-A + unsafe-B #1/123: ok | ok | ok |
    soft-safe-A + unsafe-B #1/123: ok | ok | ok |
    hard-safe-A + unsafe-B #1/132: ok | ok | ok |
    soft-safe-A + unsafe-B #1/132: ok | ok | ok |
    hard-safe-A + unsafe-B #1/213: ok | ok | ok |
    soft-safe-A + unsafe-B #1/213: ok | ok | ok |
    hard-safe-A + unsafe-B #1/231: ok | ok | ok |
    soft-safe-A + unsafe-B #1/231: ok | ok | ok |
    hard-safe-A + unsafe-B #1/312: ok | ok | ok |
    soft-safe-A + unsafe-B #1/312: ok | ok | ok |
    hard-safe-A + unsafe-B #1/321: ok | ok | ok |
    soft-safe-A + unsafe-B #1/321: ok | ok | ok |
    hard-safe-A + unsafe-B #2/123: ok | ok | ok |
    soft-safe-A + unsafe-B #2/123: ok | ok | ok |
    hard-safe-A + unsafe-B #2/132: ok | ok | ok |
    soft-safe-A + unsafe-B #2/132: ok | ok | ok |
    hard-safe-A + unsafe-B #2/213: ok | ok | ok |
    soft-safe-A + unsafe-B #2/213: ok | ok | ok |
    hard-safe-A + unsafe-B #2/231: ok | ok | ok |
    soft-safe-A + unsafe-B #2/231: ok | ok | ok |
    hard-safe-A + unsafe-B #2/312: ok | ok | ok |
    soft-safe-A + unsafe-B #2/312: ok | ok | ok |
    hard-safe-A + unsafe-B #2/321: ok | ok | ok |
    soft-safe-A + unsafe-B #2/321: ok | ok | ok |
    hard-irq lock-inversion/123: ok | ok | ok |
    soft-irq lock-inversion/123: ok | ok | ok |
    hard-irq lock-inversion/132: ok | ok | ok |
    soft-irq lock-inversion/132: ok | ok | ok |
    hard-irq lock-inversion/213: ok | ok | ok |
    soft-irq lock-inversion/213: ok | ok | ok |
    hard-irq lock-inversion/231: ok | ok | ok |
    soft-irq lock-inversion/231: ok | ok | ok |
    hard-irq lock-inversion/312: ok | ok | ok |
    soft-irq lock-inversion/312: ok | ok | ok |
    hard-irq lock-inversion/321: ok | ok | ok |
    soft-irq lock-inversion/321: ok | ok | ok |
    hard-irq read-recursion/123: ok |
    soft-irq read-recursion/123: ok |
    hard-irq read-recursion/132: ok |
    soft-irq read-recursion/132: ok |
    hard-irq read-recursion/213: ok |
    soft-irq read-recursion/213: ok |
    hard-irq read-recursion/231: ok |
    soft-irq read-recursion/231: ok |
    hard-irq read-recursion/312: ok |
    soft-irq read-recursion/312: ok |
    hard-irq read-recursion/321: ok |
    soft-irq read-recursion/321: ok |
    --------------------------------+-----+----------------
    Good, all 210 testcases passed! |
    --------------------------------+

    Signed-off-by: Ingo Molnar
    Signed-off-by: Arjan van de Ven
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Ingo Molnar