06 Jun, 2011
1 commit
-
Semicolons are not necessary after switch/while/for/if braces
so remove them.Signed-off-by: Joe Perches
Signed-off-by: David S. Miller
25 May, 2011
1 commit
-
Change each shrinker's API by consolidating the existing parameters into
shrink_control struct. This will simplify any further features added w/o
touching each file of shrinker.[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: fix warning]
[kosaki.motohiro@jp.fujitsu.com: fix up new shrinker API]
[akpm@linux-foundation.org: fix xfs warning]
[akpm@linux-foundation.org: update gfs2]
Signed-off-by: Ying Han
Cc: KOSAKI Motohiro
Cc: Minchan Kim
Acked-by: Pavel Emelyanov
Cc: KAMEZAWA Hiroyuki
Cc: Mel Gorman
Acked-by: Rik van Riel
Cc: Johannes Weiner
Cc: Hugh Dickins
Cc: Dave Hansen
Cc: Steven Whitehouse
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
17 Dec, 2010
2 commits
-
Now that all client-side XDR decoder routines use xdr_streams, there
should be no need to support the legacy calling sequence [rpc_rqst *,
__be32 *, RPC res *] anywhere. We can construct an xdr_stream in the
generic RPC code, instead of in each decoder function.This is a refactoring change. It should not cause different behavior.
Signed-off-by: Chuck Lever
Tested-by: J. Bruce Fields
Signed-off-by: Trond Myklebust -
Now that all client-side XDR encoder routines use xdr_streams, there
should be no need to support the legacy calling sequence [rpc_rqst *,
__be32 *, RPC arg *] anywhere. We can construct an xdr_stream in the
generic RPC code, instead of in each encoder function.Also, all the client-side encoder functions return 0 now, making a
return value superfluous. Take this opportunity to convert them to
return void instead.This is a refactoring change. It should not cause different behavior.
Signed-off-by: Chuck Lever
Tested-by: J. Bruce Fields
Signed-off-by: Trond Myklebust
27 Oct, 2010
1 commit
-
* 'for-2.6.37' of git://linux-nfs.org/~bfields/linux: (99 commits)
svcrpc: svc_tcp_sendto XPT_DEAD check is redundant
svcrpc: no need for XPT_DEAD check in svc_xprt_enqueue
svcrpc: assume svc_delete_xprt() called only once
svcrpc: never clear XPT_BUSY on dead xprt
nfsd4: fix connection allocation in sequence()
nfsd4: only require krb5 principal for NFSv4.0 callbacks
nfsd4: move minorversion to client
nfsd4: delay session removal till free_client
nfsd4: separate callback change and callback probe
nfsd4: callback program number is per-session
nfsd4: track backchannel connections
nfsd4: confirm only on succesful create_session
nfsd4: make backchannel sequence number per-session
nfsd4: use client pointer to backchannel session
nfsd4: move callback setup into session init code
nfsd4: don't cache seq_misordered replies
SUNRPC: Properly initialize sock_xprt.srcaddr in all cases
SUNRPC: Use conventional switch statement when reclassifying sockets
sunrpc/xprtrdma: clean up workqueue usage
sunrpc: Turn list_for_each-s into the ..._entry-s
...Fix up trivial conflicts (two different deprecation notices added in
separate branches) in Documentation/feature-removal-schedule.txt
26 Oct, 2010
1 commit
-
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (67 commits)
SUNRPC: Cleanup duplicate assignment in rpcauth_refreshcred
nfs: fix unchecked value
Ask for time_delta during fsinfo probe
Revalidate caches on lock
SUNRPC: After calling xprt_release(), we must restart from call_reserve
NFSv4: Fix up the 'dircount' hint in encode_readdir
NFSv4: Clean up nfs4_decode_dirent
NFSv4: nfs4_decode_dirent must clear entry->fattr->valid
NFSv4: Fix a regression in decode_getfattr
NFSv4: Fix up decode_attr_filehandle() to handle the case of empty fh pointer
NFS: Ensure we check all allocation return values in new readdir code
NFS: Readdir plus in v4
NFS: introduce generic decode_getattr function
NFS: check xdr_decode for errors
NFS: nfs_readdir_filler catch all errors
NFS: readdir with vmapped pages
NFS: remove page size checking code
NFS: decode_dirent should use an xdr_stream
SUNRPC: Add a helper function xdr_inline_peek
NFS: remove readdir plus limit
...
25 Oct, 2010
1 commit
-
Signed-off-by: Trond Myklebust
30 Sep, 2010
1 commit
-
On Wed, 29 Sep 2010 14:02:38 +1000 Stephen Rothwell wrote:
>
> After merging the final tree, today's linux-next build (powerpc
> ppc44x_defconfig) produced tis warning:
>
> WARNING: net/sunrpc/sunrpc.o(.init.text+0x110): Section mismatch in reference from the function init_sunrpc() to the function .exit.text:rpcauth_remove_module()
> The function __init init_sunrpc() references
> a function __exit rpcauth_remove_module().
> This is often seen when error handling in the init function
> uses functionality in the exit path.
> The fix is often to remove the __exit annotation of
> rpcauth_remove_module() so it may be used outside an exit section.
>
> Probably caused by commit 2f72c9b73730c335381b13e2bd221abe1acea394
> ("sunrpc: The per-net skeleton").This actually causes a build failure on a sparc32 defconfig build:
`rpcauth_remove_module' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o
I applied the following patch for today:
Fixes:
`rpcauth_remove_module' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o
Signed-off-by: Stephen Rothwell
Acked-by: Pavel Emelyanov
Signed-off-by: J. Bruce Fields
13 Sep, 2010
1 commit
-
The maximum size of the authcache is now set to 1024 (10 bits),
but on our server we need at least 4096 (12 bits). Increase
MAX_HASHTABLE_BITS to 14. This is a maximum of 16384 entries,
each containing a pointer (8 bytes on x86_64). This is
exactly the limit of kmalloc() (128K).Signed-off-by: Miquel van Smoorenburg
Signed-off-by: Trond Myklebust
11 Aug, 2010
1 commit
-
After merging the rr tree, today's linux-next build (powerpc
ppc64_defconfig) failed like this:net/sunrpc/auth.c:74: error: 'param_ops_hashtbl_sz' undeclared here (not in a function)
Caused by commit 0685652df0929cec7d78efa85127f6eb34962132
("param:param_ops") interacting with commit
f8f853ab19fcc415b6eadd273373edc424916212 ("SUNRPC: Make the credential
cache hashtable size configurable") from the nfs tree.Signed-off-by: Stephen Rothwell
Signed-off-by: Rusty Russell
08 Aug, 2010
1 commit
-
* 'nfs-for-2.6.36' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (42 commits)
NFS: NFSv4.1 is no longer a "developer only" feature
NFS: NFS_V4 is no longer an EXPERIMENTAL feature
NFS: Fix /proc/mount for legacy binary interface
NFS: Fix the locking in nfs4_callback_getattr
SUNRPC: Defer deleting the security context until gss_do_free_ctx()
SUNRPC: prevent task_cleanup running on freed xprt
SUNRPC: Reduce asynchronous RPC task stack usage
SUNRPC: Move the bound cred to struct rpc_rqst
SUNRPC: Clean up of rpc_bindcred()
SUNRPC: Move remaining RPC client related task initialisation into clnt.c
SUNRPC: Ensure that rpc_exit() always wakes up a sleeping task
SUNRPC: Make the credential cache hashtable size configurable
SUNRPC: Store the hashtable size in struct rpc_cred_cache
NFS: Ensure the AUTH_UNIX credcache is allocated dynamically
NFS: Fix the NFS users of rpc_restart_call()
SUNRPC: The function rpc_restart_call() should return success/failure
NFSv4: Get rid of the bogus RPC_ASSASSINATED(task) checks
NFSv4: Clean up the process of renewing the NFSv4 lease
NFSv4.1: Handle NFS4ERR_DELAY on SEQUENCE correctly
NFS: nfs_rename() should not have to flush out writebacks
...
04 Aug, 2010
5 commits
-
This will allow us to save the original generic cred in rpc_message, so
that if we migrate from one server to another, we can generate a new bound
cred without having to punt back to the NFS layer.Signed-off-by: Trond Myklebust
-
Signed-off-by: Trond Myklebust
-
This patch allows the user to configure the credential cache hashtable size
using a new module parameter: auth_hashtable_size
When set, this parameter will be rounded up to the nearest power of two,
with a maximum allowed value of 1024 elements.Signed-off-by: Trond Myklebust
-
Cleanup in preparation for allowing the user to determine the maximum hash
table size.Signed-off-by: Trond Myklebust
-
Signed-off-by: Trond Myklebust
21 Jul, 2010
1 commit
-
Add the shrinkers missed in the first conversion of the API in
commit 7f8275d0d660c146de6ee3017e1e2e594c49e820 ("mm: add context argument to
shrinker callback").Signed-off-by: Dave Chinner
15 May, 2010
3 commits
-
Signed-off-by: Trond Myklebust
-
The 'cred_unused' list, that is traversed by rpcauth_cache_shrinker is
ordered by time. If we hit a credential that is under the 60 second garbage
collection moratorium, we should exit because we know at that point that
all successive credentials are subject to the same moratorium...Signed-off-by: Trond Myklebust
-
Under some circumstances, put_rpccred() can end up allocating memory, so
check the gfp_mask to prevent deadlocks.Signed-off-by: Trond Myklebust
23 Apr, 2010
1 commit
-
Don't want to evict a credential if cred->cr_expire == jiffies, since that
means that it was just placed on the cred_unused list. We therefore need to
use time_in_range() rather than time_in_range_open().Signed-off-by: Trond Myklebust
14 Dec, 2009
1 commit
03 Dec, 2009
1 commit
-
It is possible for rpcauth_destroy_credcache() to cause the rpc credentials
to be unhashed while put_rpccred is waiting for the rpc_credcache_lock on
another cpu. Should this happen, then we can end up calling
hlist_del_rcu(&cred->cr_hash) a second time in put_rpccred, thus causing
list corruption.Should the credential actually be hashed, it is also possible for
rpcauth_lookup_credcache to find and reference it before we get round to
unhashing it. In this case, the call to rpcauth_unhash_cred will fail, and
so we should just exit without destroying the cred.Reported-by: Neil Brown
Signed-off-by: Trond Myklebust
30 Nov, 2009
1 commit
-
Not including net/atm/
Compiled tested x86 allyesconfig only
Added a > 80 column line or two, which I ignored.
Existing checkpatch plaints willfully, cheerfully ignored.Signed-off-by: Joe Perches
Signed-off-by: David S. Miller
16 Sep, 2009
1 commit
-
Otherwise, the upcall is going to be synchronous, which may not be what the
caller wants...Signed-off-by: Trond Myklebust
Signed-off-by: J. Bruce Fields
31 Dec, 2008
1 commit
24 Dec, 2008
2 commits
-
Hi.
I've been looking at a bugzilla which describes a problem where
a customer was advised to use either the "noac" or "actimeo=0"
mount options to solve a consistency problem that they were
seeing in the file attributes. It turned out that this solution
did not work reliably for them because sometimes, the local
attribute cache was believed to be valid and not timed out.
(With an attribute cache timeout of 0, the cache should always
appear to be timed out.)In looking at this situation, it appears to me that the problem
is that the attribute cache timeout code has an off-by-one
error in it. It is assuming that the cache is valid in the
region, [read_cache_jiffies, read_cache_jiffies + attrtimeo]. The
cache should be considered valid only in the region,
[read_cache_jiffies, read_cache_jiffies + attrtimeo). With this
change, the options, "noac" and "actimeo=0", work as originally
expected.This problem was previously addressed by special casing the
attrtimeo == 0 case. However, since the problem is only an off-
by-one error, the cleaner solution is address the off-by-one
error and thus, not require the special case.Thanx...
ps
Signed-off-by: Peter Staubach
Signed-off-by: Trond Myklebust -
Somehow, this escaped the previous purge. There should be no need to keep
any extra locks in the XDR callbacks.The NFS client XDR code only writes into private objects, whereas all reads
of shared objects are confined to fields that do not change, such as
filehandles...Ditto for lockd, the NFSv2/v3 client mount code, and rpcbind.
The nfsd XDR code may require the BKL, but since it does a synchronous RPC
call from a thread that already holds the lock, that issue is moot.Signed-off-by: Trond Myklebust
14 Nov, 2008
3 commits
-
Wrap current->cred and a few other accessors to hide their actual
implementation.Signed-off-by: David Howells
Acked-by: James Morris
Acked-by: Serge Hallyn
Signed-off-by: James Morris -
Separate the task security context from task_struct. At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.With comment fixes Signed-off-by: Marc Dionne
Signed-off-by: David Howells
Acked-by: James Morris
Acked-by: Serge Hallyn
Signed-off-by: James Morris -
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.Signed-off-by: David Howells
Reviewed-by: James Morris
Acked-by: Serge Hallyn
Cc: Trond Myklebust
Cc: J. Bruce Fields
Cc: Neil Brown
Cc: linux-nfs@vger.kernel.org
Signed-off-by: James Morris
29 Oct, 2008
2 commits
-
We have to be careful when we try to unhash the credential in
put_rpccred(), because we're not holding the credcache lock, so the call to
rpcauth_unhash_cred() may fail if someone else has looked the cred up, and
obtained a reference to it.Signed-off-by: Trond Myklebust
-
We need to make sure that we don't remove creds from the cred_unused list
if they are still under the moratorium, or else they will never get
garbage collected.Signed-off-by: Trond Myklebust
17 Oct, 2008
1 commit
-
Some code here depends on CONFIG_KMOD to not try to load
protocol modules or similar, replace by CONFIG_MODULES
where more than just request_module depends on CONFIG_KMOD
and and also use try_then_request_module in ebtables.Signed-off-by: Johannes Berg
Signed-off-by: Rusty Russell
Signed-off-by: David S. Miller
20 Apr, 2008
1 commit
-
Signed-off-by: Trond Myklebust
15 Mar, 2008
5 commits
-
The NFSv4 protocol allows clients to negotiate security protocols on the
fly in the case where an administrator on the server changes the export
settings and/or in the case where we may have a filesystem migration event.Instead of having the NFS client code cache credentials that are tied to a
particular AUTH method it is therefore preferable to have a generic credential
that can be converted into whatever AUTH is in use by the RPC client when
the read/write/sillyrename/... is put on the wire.We do this by means of the new "generic" credential, which basically just
caches the minimal information that is needed to look up an RPCSEC_GSS,
AUTH_SYS, or AUTH_NULL credential.Signed-off-by: Trond Myklebust
-
We need the ability to treat 'generic' creds specially, since they want to
bind instances of the auth cred instead of binding themselves.Signed-off-by: Trond Myklebust
-
Add an rpc credential that is not tied to any particular auth mechanism,
but that can be cached by NFS, and later used to look up a cred for
whichever auth mechanism that turns out to be valid when the RPC call is
being made.Signed-off-by: Trond Myklebust
-
Signed-off-by: Trond Myklebust
-
The current RPCAUTH_LOOKUP_ROOTCREDS flag only works for AUTH_SYS
authentication, and then only as a special case in the code. This patch
removes the auth_sys special casing, and replaces it with generic code.Signed-off-by: Trond Myklebust