17 Jun, 2016
2 commits
-
Add SATA3 support for Broadcom NSP SoC
Signed-off-by: Yendapally Reddy Dhananjaya Reddy
Acked-by: Florian Fainelli
Signed-off-by: Tejun Heo -
Rename the existing Broadcom STB ahci driver to common
Broadcom SATA3 driver to share this across Broadcom SoCs.Signed-off-by: Yendapally Reddy Dhananjaya Reddy
Acked-by: Florian Fainelli
Signed-off-by: Tejun Heo
24 May, 2016
1 commit
-
Pull libata sata_dwc_460ex updates from Tejun Heo:
"Patches to bring sata_dwc_460ex up to snuff.It was a separate pull request because it depends on dmaengine dw
platform changes which are now in mainline"* 'for-4.7-dw' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (24 commits)
ata: dwc: add DMADEVICES dependency
powerpc/4xx: Device tree update for the 460ex DWC SATA
ata: sata_dwc_460ex: make debug messages neat
ata: sata_dwc_460ex: supply physical address of FIFO to DMA
ata: sata_dwc_460ex: use devm_ioremap
ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr()
ata: sata_dwc_460ex: use readl/writel_relaxed()
ata: sata_dwc_460ex: switch to new dmaengine_terminate_* API
ata: sata_dwc_460ex: add __iomem to register base pointer
ata: sata_dwc_460ex: get rid of incorrect cast
ata: sata_dwc_460ex: get rid of some pointless casts
ata: sata_dwc_460ex: remove empty libata callback
ata: sata_dwc_460ex: correct HOSTDEV{P}_FROM_*() macros
ata: sata_dwc_460ex: get rid of global data
ata: sata_dwc_460ex: add phy support
ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
ata: sata_dwc_460ex: don't call ata_sff_qc_issue() on DMA commands
ata: sata_dwc_460ex: skip dma setup for non-dma commands
ata: sata_dwc_460ex: select only core part of DMA driver
ata: sata_dwc_460ex: DMA is always a flow controller
...
13 May, 2016
1 commit
-
The dwc_460ex SATA driver has become available on non-powerpc architectures
and may cause randconfig build errors when CONFIG_DMADEVICES is not set
and SATA_DWC_OLD_DMA is enabled:warning: (SATA_DWC_OLD_DMA) selects DW_DMAC_CORE which has unmet direct dependencies (DMADEVICES)
ERROR: "dw_dma_probe" [drivers/ata/sata_dwc_460ex.ko] undefined!
ERROR: "dw_dma_remove" [drivers/ata/sata_dwc_460ex.ko] undefined!This adds an explcit Kconfig dependency to CONFIG_SATA_DWC so we
cannot run into broken configurations. While it would also be
possible to build the driver with both CONFIG_DMADEVICES
and SATA_DWC_OLD_DMA disabled, that case is not useful because
there is no fallback to PIO mode when the DMA engine is not
usable.Signed-off-by: Arnd Bergmann
Fixes: 50b433753df6 ("ata: sata_dwc_460ex: use "dmas" DT property to find dma channel")
Reviewed-by: Andy Shevchenko
Signed-off-by: Tejun Heo
11 May, 2016
3 commits
-
This adds support for powering on an optional PHY when activating the
device.Tested-by: Christian Lamparter
Signed-off-by: Mans Rullgard
Signed-off-by: Tejun Heo -
Currently this driver only works with a DesignWare DMA engine which it
registers manually using the second "reg" address range and interrupt
number from the DT node.This patch makes the driver instead use the "dmas" property if present,
otherwise optionally falling back on the old way so existing device
trees can continue to work.With this change, there is no longer any reason to depend on the 460EX
machine type so drop that from Kconfig.Tested-by: Christian Lamparter
Signed-off-by: Mans Rullgard
Signed-off-by: Tejun Heo -
There is no need to have a platform driver compiled since the DMA driver is
used as a library.Tested-by: Christian Lamparter
Signed-off-by: Andy Shevchenko
Signed-off-by: Tejun Heo
14 Apr, 2016
1 commit
-
AMD Seattle SATA controller mostly conforms to AHCI interface with some
special register to control SGPIO interface. In the case of an AHCI
controller, the SGPIO feature is ideally implemented using the
"Enclosure Management" register of the AHCI controller, but those
registeres are not implemented in the Seattle SoC. Instead SoC
(Rev B0 onwards) provides a 32-bit SGPIO control register which should
be programmed to control the activity, locate and fault LEDs.The driver is based on ahci_platform driver.
Signed-off-by: Brijesh Singh
Acked-by: Hans de Goede
CC: tj@kernel.org
CC: linux-ide@vger.kernel.org
Signed-off-by: Tejun Heo
04 Mar, 2016
1 commit
-
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.
This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.Signed-off-by: Simon Horman
Signed-off-by: Tejun Heo
Acked-by: Geert Uytterhoeven
11 Feb, 2016
1 commit
-
The OCTEON SATA controller is currently found on cn71XX devices.
Acked-by: Arnd Bergmann
Acked-by: Hans de Goede
Acked-by: Rob Herring
Signed-off-by: David Daney
Signed-off-by: Vinita Gupta
Signed-off-by: Aleksey Makarov
Signed-off-by: Zubair Lutfullah Kakakhel
Signed-off-by: Tejun Heo
01 Jan, 2016
1 commit
-
The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware
block for AHCI SATA3.This new compatible string, "brcm,bcm7425-ahci", may be used for most
MIPS-based platforms of 40nm process technology.Signed-off-by: Jaedon Shin
Tested-by: Florian Fainelli
Acked-by: Brian Norris
Signed-off-by: Tejun Heo
09 Sep, 2015
1 commit
-
Currently Freescale QorIQ series SATA is supported by ahci_platform
driver. Some SoC specific settings have been put in uboot. So whether
SATA works or not heavily depends on uboot.
This patch will add a new driver to support QorIQ sata which removes
the dependency on any other boot loader.
Freescale QorIQ series sata, like ls1021a ls2085a ls1043a, is
compatible with serial ATA 3.0 and AHCI 1.3 specification.Signed-off-by: Yuantian Tang
Reviewed-by: Hans de Goede
Signed-off-by: Tejun Heo
07 Jul, 2015
1 commit
-
This patch adds ACPI supports for AHCI platform driver, which uses _CLS
method to match the device.The following is an example of ASL structure in DSDT for a SATA controller,
which contains _CLS package to be matched by the ahci_platform driver:Device (AHC0) // AHCI Controller
{
Name(_HID, "AMDI0600")
Name (_CCA, 1)
Name (_CLS, Package (3)
{
0x01, // Base Class: Mass Storage
0x06, // Sub-Class: serial ATA
0x01, // Interface: AHCI
})
Name (_CRS, ResourceTemplate ()
{
Memory32Fixed (ReadWrite, 0xE0300000, 0x00010000)
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive,,,) { 387 }
})
}Also, since ATA driver should not require PCI support for ATA_ACPI,
this patch removes dependency in the driver/ata/Kconfig.Acked-by: Tejun Heo
Acked-by: Mika Westerberg
Reviewed-by: Hanjun Guo
Signed-off-by: Suravee Suthikulpanit
Signed-off-by: Rafael J. Wysocki
27 Jun, 2015
1 commit
-
Pull ARM SoC cleanups from Kevin Hilman:
"A relatively small setup of cleanups this time around, and similar to
last time the bulk of it is removal of legacy board support:- OMAP: removal of legacy (non-DT) booting for several platforms
- i.MX: remove some legacy board files"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
ARM: fix EFM32 build breakage caused by cpu_resume_arm
ARM: 8389/1: Add cpu_resume_arm() for firmwares that resume in ARM state
ARM: v7 setup function should invalidate L1 cache
mach-omap2: Remove use of deprecated marco, PTR_RET in devices.c
ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c
ARM: OMAP2+: Constify irq_domain_ops
ARM: OMAP2+: use symbolic defines for console loglevels instead of numbers
ARM: at91: remove useless Makefile.boot
ARM: at91: remove at91rm9200_sdramc.h
ARM: at91: remove mach/at91_ramc.h and mach/at91rm9200_mc.h
ARM: at91/pm: use the atmel-mc syscon defines
pcmcia: at91_cf: Use syscon to configure the MC/smc
ARM: at91: declare the at91rm9200 memory controller as a syscon
mfd: syscon: Add Atmel MC (Memory Controller) registers definition
ARM: at91: drop sam9_smc.c
ata: at91: use syscon to configure the smc
ARM: ux500: delete static resource defines
ARM: ux500: rename ux500_map_io
ARM: ux500: look up PRCMU resource from DT
ARM: ux500: kill off L2CC static map
...
26 Jun, 2015
1 commit
-
Pull libata updates from Tejun Heo:
- a number of libata core changes to better support NCQ TRIM.
- ahci now supports MSI-X in single IRQ mode to support a new
controller which doesn't implement MSI or INTX.- ahci now supports edge-triggered IRQ mode to support a new controller
which for some odd reason did edge-triggered IRQ.- the usual controller support additions and changes.
* 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (27 commits)
libata: Do not blacklist Micron M500DC
ata: ahci_mvebu: add suspend/resume support
ahci, msix: Fix build error for !PCI_MSI
ahci: Add support for Cavium's ThunderX host controller
ahci: Add generic MSI-X support for single interrupts to SATA PCI driver
libata: finally use __initconst in ata_parse_force_one()
drivers: ata: add support for Ceva sata host controller
devicetree:bindings: add devicetree bindings for ceva ahci
ahci: added support for Freescale AHCI sata
ahci: Store irq number in struct ahci_host_priv
ahci: Move interrupt enablement code to a separate function
Doc: libata: Fix spelling typo found in libata.xml
ata:sata_nv - Change 1 to true for bool type variable.
ata: add Broadcom AHCI SATA3 driver for STB chips
Documentation: devicetree: add Broadcom SATA binding
libata: Fix regression when the NCQ Send and Receive log page is absent
ata: hpt366: fix constant cast warning
ata: ahci_xgene: potential NULL dereference in probe
ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
...
10 Jun, 2015
1 commit
-
Adds support for Ceva sata host controller on Xilinx
Zynq UltraScale+ MPSoC.Signed-off-by: Suneel Garapati
Acked-by: Hans de Goede
Signed-off-by: Tejun Heo
25 May, 2015
1 commit
-
Pretty straightforward driver, using the nice library-ization of the
generic ahci_platform driver.Signed-off-by: Brian Norris
Signed-off-by: Tejun Heo
20 May, 2015
1 commit
-
Use syscon/regmap to configure the smc. This allows to avoid using
at91sam9_smc.h and to compile the driver in a multiplatform configuration.The driver will still not probe until the proper DT bindings are added. That
binding will include an atmel,smc property that is a phandle to the SMC the CF
controller is connected to.Signed-off-by: Alexandre Belloni
Acked-by: Nicolas Ferre
05 May, 2015
1 commit
-
Since sata_dwc_460ex.c was moved to generic DMA driver we have to ensure that
user can still compile it.Fixes: 8b3444852a2b (sata_dwc_460ex: move to generic DMA driver)
Signed-off-by: Andy Shevchenko
Signed-off-by: Tejun Heo
15 Apr, 2015
1 commit
-
The SCC PATA interface is only used by celleb.
celleb has been dropped [1], so drop the drivers.[1] http://patchwork.ozlabs.org/patch/451730/
CC: "David S. Miller"
CC: linux-ide@vger.kernel.org
CC: Valentin Rothberg
CC: mpe@ellerman.id.au
CC: linuxppc-dev@lists.ozlab.org
Acked-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Daniel Axtens
Signed-off-by: Tejun Heo
11 Feb, 2015
1 commit
-
Commit 84683a7e081f ("sata_dwc_460ex: enable COMPILE_TEST for the
driver") enabled this driver for non-ppc460-ex platforms, but it was
then disabled for ARM and ARM64 by commit 2de5a9c004e9 ("sata_dwc_460ex:
disable compilation on ARM and ARM64") because it's too noisy and
broken.This disabled is entirely, because it's too noisy on x86-64 too, and
there's no point in disabling architectures one by one. At a minimum,
the code isn't 64-bit clean, and even on 32-bit it is questionable
whether it makes sense.Cc: Andy Shevchenko
Cc: Tejun Heo
Signed-off-by: Linus Torvalds
09 Feb, 2015
1 commit
-
…j/libata into for-3.20
09c32aaa3683 ("ahci_xgene: Fix the dma state machine lockup for the
ATA_CMD_SMART PIO mode command.") missed 3.19 release. Fold it into
for-3.20.Signed-off-by: Tejun Heo <tj@kernel.org>
14 Jan, 2015
1 commit
-
Until the driver is corrected to stop using mach/at91isam9_smc.h, it won't
compile in a ARCH_MULTIPLATFORM configuration.Suggested-by: Arnd Bergmann
Signed-off-by: Alexandre Belloni
Signed-off-by: Tejun Heo
12 Jan, 2015
1 commit
-
For now disable the compilation of the driver on ARM and ARM64. In the future
we will fix the DMA handling in that driver and re-enable compilation back.Reported-by: kbuild test robot
Signed-off-by: Andy Shevchenko
Signed-off-by: Tejun Heo
08 Jan, 2015
1 commit
-
To test how the driver could be compiled in the non-native environment let's
enable COMPILE_TEST for it. It would be useful for further work.This patch enables COMPILE_TEST for the driver and fixes compilation errors on
at least x86 platforms.Signed-off-by: Andy Shevchenko
Signed-off-by: Tejun Heo
13 Dec, 2014
1 commit
-
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so Kconfig options
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.Replace PM_RUNTIME with PM in Kconfig dependencies throughout the
tree.Signed-off-by: Rafael J. Wysocki
Acked-by: Felipe Balbi
Acked-by: Greg Kroah-Hartman
Acked-by: Tejun Heo
09 Sep, 2014
1 commit
-
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu.
ARCH_MVEBU is sufficient.Signed-off-by: Andrew Lunn
Cc: Tejun Heo
Cc: linux-ide@vger.kernel.org
Acked-by: Tejun Heo
Link: https://lkml.kernel.org/r/1409417172-6846-3-git-send-email-andrew@lunn.ch
Signed-off-by: Jason Cooper
07 Aug, 2014
1 commit
-
The function may be useful for other drivers, so export it. (Suggested
by Tejun Heo.)Note that I inverted the return value of glob_match; returning true on
match seemed to make more sense.Signed-off-by: George Spelvin
Cc: Randy Dunlap
Cc: Tejun Heo
Cc: Ingo Molnar
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
19 Jul, 2014
1 commit
-
This adds support for the integrated AHCI-compliant Serial ATA
controller present on the NVIDIA Tegra124 system-on-chip.Signed-off-by: Mikko Perttunen
Acked-by: Hans de Goede
Signed-off-by: Tejun Heo
10 Jun, 2014
1 commit
-
Pull libata updates from Tejun Heo:
"Nothing too interesting - another ahci platform driver variant,
additional controller support, minor fixes and cleanups"* 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: Add Device ID for HighPoint RocketRaid 642L
ata: ep93xx: use dmaengine_prep_slave_sg api instead of internal callback
ahci: add PCI ID for Marvell 88SE91A0 SATA Controller
sata_fsl: remove check for CONFIG_MPC8315_DS
ahci: add support for Hisilicon sata
libahci_platform: add host_flags parameter in ahci_platform_init_host()
ata: ahci: append new hflag AHCI_HFLAG_NO_FBS
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
Documentation: dt-bindings: reformat and order list of ahci-platform compatibles
libata-sff: remove dead code
ata: SATL compliance for Inquiry Product Revision
pata_octeon_cf: use devm_kzalloc() to allocate cf_port
08 May, 2014
1 commit
-
The smc driver used by pata_at91 is at91sam9 specific, so building
this driver on another at91 platform results in this error:ERROR: "sam9_smc_configure" [drivers/ata/pata_at91.ko] undefined!
ERROR: "sam9_smc_write_mode" [drivers/ata/pata_at91.ko] undefined!
ERROR: "sam9_smc_read_mode" [drivers/ata/pata_at91.ko] undefined!This patch changes the Kconfig dependency to ensure it always works.
Signed-off-by: Arnd Bergmann
Signed-off-by: Tejun Heo
Cc: linux-ide@vger.kernel.org
Cc: Jean-Christophe Plagniol-Villard
Cc: Nicolas Ferre
05 May, 2014
1 commit
-
The Marvell Armada 380 SoC includes two AHCI compatible
interfaces. However, like all DMA-capable Marvell interface, they
require special handling to configure MBus windows. Therefore, this
commit adds a new ahci_mvebu driver, which relies on the
libahci_platform.c code recently introduced.Signed-off-by: Thomas Petazzoni
Acked-by: Jason Cooper
Signed-off-by: Tejun Heo
08 Apr, 2014
1 commit
-
The ahci_imx driver is only needed on Freescale i.MX platforms so
don't let it be built on other platforms, except for build test
purpose.Signed-off-by: Jean Delvare
Cc: Tejun Heo
Cc: Richard Zhu
Signed-off-by: Tejun Heo
03 Apr, 2014
1 commit
-
AHCI_XGENE is only applicable on ARM64 but it can also be enabled for
compile testing; however, AHCI_XGENE selects PHY_XGENE which has other
arch specific dependencies. This leads to the following warning when
enabling it on other archs for compile testing.warning: (AHCI_XGENE) selects PHY_XGENE which has unmet direct
dependencies (HAS_IOMEM && OF && (ARM64 || COMPILE_TEST))Selecting a config option which itself has dependencies can easily
lead to broken configurations. For now, let's just make AHCI_XGENE
depend on PHY_XGENE which has all the necessary dependencies already.Signed-off-by: Tejun Heo
Reported-by: Linus Torvalds
Cc: Loc Ho
Cc: Bartlomiej Zolnierkiewicz
Cc: Kishon Vijay Abraham I
01 Apr, 2014
1 commit
-
Pull libata updates from Tejun Heo:
"A lot of activities on libata side this time.- A lot of changes around ahci. Various embedded platforms are
implementing ahci controllers. Some were built atop ahci_platform,
others were doing their own things. Hans made some structural
changes to libahci and librarized ahci_platform so that ahci
platform drivers can share more common code. A couple platform
drivers are added on top of that and several are added to replace
older drivers which were doing their own things (older ones are
scheduled to be removed).- Dan finishes the patchset to make libata PM operations
asynchronous. Combined with one patch being routed through scsi,
this should speed resume measurably.- Various fixes and cleanups from Bartlomiej and others"
* 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (61 commits)
ata: fix Marvell SATA driver dependencies
ata: fix ARASAN CompactFlash PATA driver dependencies
ata: remove superfluous casts
ata: sata_highbank: remove superfluous cast
ata: fix Calxeda Highbank SATA driver dependencies
ata: fix R-Car SATA driver dependencies
ARM: davinci: da850: update SATA AHCI support
ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
ata: move library code from ahci_platform.c to libahci_platform.c
ata: ahci_platform: fix ahci_platform_data->suspend method handling
libata: remove unused ata_sas_port_async_resume() stub
libata.h: add stub for ata_sas_port_resume
libata: async resume
libata, libsas: kill pm_result and related cleanup
ata: Fix compiler warning with APM X-Gene host controller driver
arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries
ata: Add APM X-Gene SoC AHCI SATA host controller driver
Documentation: Add documentation for the APM X-Gene SoC SATA host controller DTS binding
arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries
ata: ahci_sunxi: fix code formatting
...
27 Mar, 2014
2 commits
-
Make sata_mv host driver depend on PCI || ARCH_DOVE || ARCH_KIRKWOOD ||
ARCH_MV78XX0 || ARCH_MVEBU || ARCH_ORION5X config options as Marvell
SATA support covers both Marvell PCI devices and Marvell Dove, Kirkwood,
MV78xx0, Armada 370/XP and Orion5x SoCs (for non-PCI devices the driver
to work requires suitable device tree node or platform device to be
defined). Additionally allow the driver build if COMPILE_TEST config
option is set.Cc: Jason Cooper
Cc: Andrew Lunn
Cc: Gregory Clement
Cc: Sebastian Hesselbarth
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Tejun Heo -
Make pata_arasan_cf host driver depend on ARCH_SPEAR13XX config
option as ARASAN CompactFlash PATA support is specific to ST
SPEAr13xx SoCs and the driver to work requires suitable device
tree node (or platform device) to be defined. Additionally
allow the driver build if COMPILE_TEST config option is set.Cc: Viresh Kumar
Cc: Shiraz Hashim
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Tejun Heo
26 Mar, 2014
3 commits
-
Make sata_highbank host driver depend on ARCH_HIGHBANK config option
as Calxeda Highbank SATA support is specific to Calxeda Highbank
SoCs and the driver to work requires suitable device tree node to
be defined. Additionally allow the driver build if COMPILE_TEST
config option is set.Cc: Mark Langsdorf
Cc: Rob Herring
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Tejun Heo -
Make sata_rcar host driver depend on ARCH_SHMOBILE config option as
Renesas R-Car SATA support is specific to Renesas SoCs and the driver
to work requires suitable device tree node (or platform device) to be
defined. Additionally allow the driver build if COMPILE_TEST config
option is set.Cc: Simon Horman
Cc: Magnus Damm
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Tejun Heo -
Add the new ahci_da850 host driver.
Platform changes needed to make DaVinci DA850 SATA AHCI support
fully functional are in the separate "ARM: davinci: da850: update
SATA AHCI support" commit.Please note that this driver doesn't have the superfluous clock
control code as clock is already handled by the generic AHCI
platform library code.Cc: Sekhar Nori
Cc: Kevin Hilman
Cc: Hans de Goede
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Tejun Heo