20 Dec, 2014
1 commit
-
The new driver is around for more than 2 years now, so the old one can
go. Getting rid of it helps the removal of the legacy .attach_adapter
callback of the I2C subsystem.Signed-off-by: Wolfram Sang
Acked-by: Benjamin Herrenschmidt
27 Nov, 2013
1 commit
-
We are missing building windfarm_max6690_sensor.o when building
CONFIG_WINDFARM_RM31. Usually all the windfarm drivers are built
and thus this isn't a problem but some more "tailored" setups
(Gentoo ?) building only that driver are not working because
the require sensor module is missing.Reported-by: Stanislav Ponomarev
Signed-off-by: Benjamin Herrenschmidt
30 Apr, 2012
1 commit
-
This replaces the old therm_pm72 using the same windfarm infrastructure
that was used for other PowerMac G5 models. The fan speeds and sensors
should now be visible in the same location in sysfs.The driver is split into separate core modules for PowerMac7,2 (and 7,3)
and RackMac3,1, with a lot of the shared code now in the separate sensor
and control modules.Signed-off-by: Benjamin Herrenschmidt
29 Oct, 2010
1 commit
-
The ams driver isn't a hardware monitoring driver, so it shouldn't
live under driver/hwmon. drivers/macintosh seems much more
appropriate, as the driver is only useful on PowerBooks and iBooks.Signed-off-by: Jean Delvare
Cc: Guenter Roeck
Cc: Stelian Pop
Cc: Michael Hanselmann
Cc: Benjamin Herrenschmidt
Cc: Grant Likely
29 Apr, 2008
1 commit
-
This implements a new driver named windfarm_pm121, which drives the
fans on PowerMac 12,1 machines : iMac G5 iSight (rev C) 17" and
20". It's based on the windfarm_pm81 driver from Benjamin
Herrenschmidt.This includes fixes from David Woodhouse correcting the names of some
of the sensors.Signed-off-by: Étienne Bersac
Signed-off-by: David Woodhouse
Signed-off-by: Benjamin Herrenschmidt
Signed-off-by: Paul Mackerras
04 Dec, 2006
1 commit
-
This is a small driver for the Xserve G5 CPU-meter blue LEDs on the
front-panel. It might work on the Xserve G4 as well though that was
not tested. It's pretty basic and could use some improvements if
somebody cares doing them. :)Signed-off-by: Benjamin Herrenschmidt
Signed-off-by: Paul Mackerras
28 Jun, 2006
1 commit
-
This patch removes the old pmac ide led blink code and
adds generic LED subsystem support for the LED.It maintains backward compatibility with the old
BLK_DEV_IDE_PMAC_BLINK Kconfig option which now
simply selects the new code and influences the
default trigger.Signed-off-by: Johannes Berg
Acked-by: Benjamin Herrenschmidt
Signed-off-by: Paul Mackerras
26 Jun, 2006
2 commits
-
Add an input device for the button and lid switch so that userspace gets
notified about the user pressing them via the standard input layer.Signed-off-by: Johannes Berg
Signed-off-by: Andrew Morton
Signed-off-by: Dmitry Torokhov -
This patch contains a total rewrite of the backlight infrastructure for
portable Apple computers. Backward compatibility is retained. A sysfs
interface allows userland to control the brightness with more steps than
before. Userland is allowed to upload a brightness curve for different
monitors, similar to Mac OS X.[akpm@osdl.org: add needed exports]
Signed-off-by: Michael Hanselmann
Acked-by: Benjamin Herrenschmidt
Cc: Richard Purdie
Cc: "Antonino A. Daplas"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
08 Feb, 2006
1 commit
-
This patch adds a windfarm module, windfarm_pm112, for the dual core G5s
(both 2 and 4 core models), keeping the machine from getting into
vacuum-cleaner mode ;) For proper credits, the patch was initially
written by Paul Mackerras, and slightly reworked by me to add overtemp
handling among others. The patch also removes the sysfs attributes from
windfarm_pm81 and windfarm_pm91 and instead adds code to the windfarm
core to automagically expose attributes for sensor & controls.Signed-off-by: Benjamin Herrenschmidt
Signed-off-by: Linus Torvalds
08 Nov, 2005
1 commit
-
This adds a new thermal control framework for PowerMac, along with the
implementation for PowerMac8,1, PowerMac8,2 (iMac G5 rev 1 and 2), and
PowerMac9,1 (latest single CPU desktop). In the future, I expect to move
the older G5 thermal control to the new framework as well.Signed-off-by: Benjamin Herrenschmidt
Signed-off-by: Paul Mackerras
07 Jul, 2005
1 commit
-
This adds sysfs nodes that the hotplug userspace can use to load the
appropriate modules.In order for hotplug to work with macio devices, patches to
module-init-tools and hotplug must be applied. Those patches are
available at:ftp://ftp.suse.com/pub/people/jeffm/linux/macio-hotplug/
Changes: The previous versions were built on 2.6.12. 2.6.13-rcX introduced
a device_attribute parameter to the show functions. Since that
parameter was treated as the output buffer, memory corruption would
result, causing Oopsen very quickly.Signed-off-by: Jeff Mahoney
Signed-off-by: Linus Torvalds
28 Jun, 2005
2 commits
-
This patch removes CONFIG_PMAC_PBOOK (PowerBook support). This is now
split into CONFIG_PMAC_MEDIABAY for the actual hotswap bay that some
powerbooks have, CONFIG_PM for power management related code, and just left
out of any CONFIG_* option for some generally useful stuff that can be used
on non-laptops as well.Signed-off-by: Benjamin Herrenschmidt
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The macserial driver has been obsoleted by the new pmac_zilog driver for a
while now and probably doesn't even work anymore on recent kernels. This
patch removes it.Signed-off-by: Benjamin Herrenschmidt
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
17 Apr, 2005
1 commit
-
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.Let it rip!
