Eric Lee / smarc-fsl-linux-kernel

20 Jan, 2016

1 commit

  • b7e2d195c   ssb: mark ssb_bus_register as __maybe_unused ... Browse Code »

    The SoC variant of the ssb code is now optional like the other
    ones, which means we can build the framwork without any
    front-end, but that results in a warning:

    drivers/ssb/main.c:616:12: warning: 'ssb_bus_register' defined but not used [-Wunused-function]

    This annotates the ssb_bus_register function as __maybe_unused to
    shut up the warning. A configuration like this will not work on
    any hardware of course, but we still want this to silently build
    without warnings if the configuration is allowed in the first
    place.

    Signed-off-by: Arnd Bergmann
    Fixes: 845da6e58e19 ("ssb: add Kconfig entry for compiling SoC related code")
    Acked-by: Michael Buesch
    Signed-off-by: Kalle Valo

    Arnd Bergmann
     

16 Dec, 2015

1 commit

  • 541c9a84c   ssb: pick SoC invariants code from MIPS BCM47xx arch ... Browse Code »

    There is code in ssb fetching "invariants" that is basically a set of
    board specific data. Every host requires its own implementation of
    reading function. In ssb we have support for PCI, PCMCIA & SDIO.
    For some (historical?) reason code reading "invariants" for SoC was
    placed in arch code and provided by a callback. This is not needed
    nowadays, so lets move that into ssb. This way we keep all "invariants"
    functions in a single module making code cleaner.

    Signed-off-by: Rafał Miłecki
    Signed-off-by: Kalle Valo

    Rafał Miłecki
     

29 Oct, 2015

3 commits

  • 845da6e58   ssb: add Kconfig entry for compiling SoC related code ... Browse Code »

    This allows saving a little of space when not using ssb on Broadcom SoC.

    Signed-off-by: Rafał Miłecki
    Signed-off-by: Kalle Valo

    Rafał Miłecki
     
  • 830c7df46   ssb: move functions specific to SoC hosted bus to separated file ... Browse Code »

    This cleans main.c a bit and will allow us to compile SoC related code
    conditionally in the future.

    Signed-off-by: Rafał Miłecki
    Signed-off-by: Kalle Valo

    Rafał Miłecki
     
  • 399500da1   ssb: pick PCMCIA host code support from b43 driver ... Browse Code »

    ssb bus can be found on various "host" devices like PCI/PCMCIA/SDIO.
    Every ssb bus contains cores AKA devices.
    The main idea is to have ssb driver scan/initialize bus and register
    ready-to-use cores. This way ssb drivers can operate on a single core
    mostly ignoring underlaying details.

    For some reason PCMCIA support was split between ssb and b43. We got
    PCMCIA host device probing in b43, then bus scanning in ssb and then
    wireless core probing back in b43. The truth is it's very unlikely we
    will ever see PCMCIA ssb device with no 802.11 core but I still don't
    see any advantage of the current architecture.

    With proposed change we get the same functionality with a simpler
    architecture, less Kconfig symbols, one killed EXPORT and hopefully
    cleaner b43. Since b43 supports both: ssb & bcma I prefer to keep ssb
    specific code in ssb driver.

    This mostly moves code from b43's pcmcia.c to bridge_pcmcia_80211.c. We
    already use similar solution with b43_pci_bridge.c. I didn't use "b43"
    in name of this new file as in theory any driver can operate on wireless
    core.

    Signed-off-by: Rafał Miłecki
    Signed-off-by: Kalle Valo

    Rafał Miłecki
     

29 Sep, 2015

1 commit

03 Mar, 2015

1 commit

  • 16f7031ae   ssb: Silence warning for unknown backplane revision ... Browse Code »

    When using a BCM4318 in a PCMCIA format, I get a startup message that the
    device uses backplane revision 0xF000000. Next a WARNING is logged. Despite
    the message, the device works fine, This patch silences the warning.

    Cc: Rafał Miłecki
    Signed-off-by: Larry Finger
    Signed-off-by: Kalle Valo

    Larry Finger
     

29 Jan, 2015

1 commit

  • c72599bf4   ssb: Fix Sparse error in main ... Browse Code »

    This change fixes below sparse error:
    drivers/ssb/main.c:94:16: warning: symbol 'ssb_sdio_func_to_bus'
    was not declared. Should it be static?

    Acked-by: Michael Buesch
    Signed-off-by: Pramod Gurav
    Signed-off-by: Kalle Valo

    Pramod Gurav
     

25 Jan, 2014

1 commit

17 Oct, 2013

1 commit

19 Jun, 2013

1 commit

07 Mar, 2013

1 commit

09 Feb, 2013

2 commits

07 Feb, 2013

1 commit

05 Feb, 2013

1 commit

31 Jan, 2013

1 commit

04 Jan, 2013

1 commit

  • 163247c1d   Drivers: ssb: remove __dev* attributes. ... Browse Code »

    CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
    markings need to be removed.

    This change removes the use of __devinit, and __devexit from these
    drivers.

    Based on patches originally written by Bill Pemberton, but redone by me
    in order to handle some of the coding style issues better, by hand.

    Cc: Bill Pemberton
    Cc: Michael Buesch
    Signed-off-by: Greg Kroah-Hartman

    Greg Kroah-Hartman
     

15 Dec, 2012

1 commit

  • cebfa85eb   Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus ... Browse Code »

    Pull MIPS updates from Ralf Baechle:
    "The MIPS bits for 3.8. This also includes a bunch fixes that were
    sitting in the linux-mips.org git tree for a long time. This pull
    request contains updates to several OCTEON drivers and the board
    support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B,
    updates to the SSB bus support, MIPS kexec code and adds support for
    kdump.

    When pulling this, there are two expected merge conflicts in
    include/linux/bcma/bcma_driver_chipcommon.h which are trivial to
    resolve, just remove the conflict markers and keep both alternatives."

    * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits)
    MIPS: PMC-Sierra Yosemite: Remove support.
    VIDEO: Newport Fix console crashes
    MIPS: wrppmc: Fix build of PCI code.
    MIPS: IP22/IP28: Fix build of EISA code.
    MIPS: RB532: Fix build of prom code.
    MIPS: PowerTV: Fix build.
    MIPS: IP27: Correct fucked grammar in ops-bridge.c
    MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled
    MIPS: Fix potencial corruption
    MIPS: Fix for warning from FPU emulation code
    MIPS: Handle COP3 Unusable exception as COP1X for FP emulation
    MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
    MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
    MIPS: Remove unused smvp.h
    MIPS/EDAC: Improve OCTEON EDAC support.
    MIPS: OCTEON: Add definitions for OCTEON memory contoller registers.
    MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h
    ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian.
    MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.
    MIPS: Remove usage of CEVT_R4K_LIB config option.
    ...

    Linus Torvalds
     

11 Dec, 2012

1 commit

07 Dec, 2012

1 commit

  • bde327eff   ssb: register watchdog driver ... Browse Code »

    Register the watchdog driver to the system if it is a SoC. Using the
    watchdog on a non SoC device, like a PCI card, will make the PCI
    card die when the timeout expired, but starting it again is not
    supported by ssb.

    Signed-off-by: Hauke Mehrtens
    Signed-off-by: John W. Linville

    Hauke Mehrtens
     

22 Nov, 2012

2 commits

  • ec43b08b5   ssb: add GPIO driver ... Browse Code »

    Register a GPIO driver to access the GPIOs provided by the chip.
    The GPIOs of the SoC should always start at 0 and the other GPIOs could
    start at a random position. There is just one SoC in a system and when
    they start at 0 the number is predictable.

    Signed-off-by: Hauke Mehrtens
    Patchwork: http://patchwork.linux-mips.org/patch/4591
    Acked-by: Florian Fainelli

    Hauke Mehrtens
     
  • 394bc7e38   ssb: add locking around gpio register accesses ... Browse Code »

    The GPIOs are access through some registers in the chip common core or
    over extif. We need locking around these GPIO accesses, all GPIOs are
    accessed through the same registers and parallel writes will cause
    problems.

    Signed-off-by: Hauke Mehrtens
    Patchwork: http://patchwork.linux-mips.org/patch/4590
    Acked-by: Florian Fainelli

    Hauke Mehrtens
     

21 Mar, 2012

1 commit

  • 3b59bf081   Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next ... Browse Code »

    Pull networking merge from David Miller:
    "1) Move ixgbe driver over to purely page based buffering on receive.
    From Alexander Duyck.

    2) Add receive packet steering support to e1000e, from Bruce Allan.

    3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

    4) Reduce cpu usage in handling out-of-order TCP packets on modern
    systems, also from Eric Dumazet.

    5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
    folks happy, from Erich Hoover.

    6) Support VLAN trunking from guests in hyperv driver, from Haiyang
    Zhang.

    7) Support byte-queue-limtis in r8169, from Igor Maravic.

    8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
    was never properly implemented, Jiri Benc fixed that.

    9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

    10) Support kernel side dump filtering by ctmark in netfilter
    ctnetlink, from Pablo Neira Ayuso.

    11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

    12) Add new peek socket options to assist with socket migration, from
    Pavel Emelyanov.

    13) Add sch_plug packet scheduler whose queue is controlled by
    userland daemons using explicit freeze and release commands. From
    Shriram Rajagopalan.

    14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

    * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
    Fix pppol2tp getsockname()
    Remove printk from rds_sendmsg
    ipv6: fix incorrent ipv6 ipsec packet fragment
    cpsw: Hook up default ndo_change_mtu.
    net: qmi_wwan: fix build error due to cdc-wdm dependecy
    netdev: driver: ethernet: Add TI CPSW driver
    netdev: driver: ethernet: add cpsw address lookup engine support
    phy: add am79c874 PHY support
    mlx4_core: fix race on comm channel
    bonding: send igmp report for its master
    fs_enet: Add MPC5125 FEC support and PHY interface selection
    net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
    net: update the usage of CHECKSUM_UNNECESSARY
    fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
    net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
    ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
    net/hyperv: Fix the code handling tx busy
    ixgbe: fix namespace issues when FCoE/DCB is not enabled
    rtlwifi: Remove unused ETH_ADDR_LEN defines
    igbvf: Use ETH_ALEN
    ...

    Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
    drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

    Linus Torvalds
     

07 Feb, 2012

1 commit

25 Jan, 2012

1 commit

  • f3ff92470   Remove useless get_driver()/put_driver() calls ... Browse Code »

    As part of the removal of get_driver()/put_driver(), this patch
    (as1512) gets rid of various useless and unnecessary calls in several
    drivers. In some cases it may be desirable to pin the driver by
    calling try_module_get(), but that can be done later.

    Signed-off-by: Alan Stern
    CC: "David S. Miller"
    CC: Konrad Rzeszutek Wilk
    CC: Michael Buesch
    CC: Joerg Roedel
    Signed-off-by: Greg Kroah-Hartman

    Alan Stern
     

01 Nov, 2011

1 commit

25 Aug, 2011

1 commit

26 Jul, 2011

1 commit

  • d3ec4844d   Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial ... Browse Code »

    * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
    fs: Merge split strings
    treewide: fix potentially dangerous trailing ';' in #defined values/expressions
    uwb: Fix misspelling of neighbourhood in comment
    net, netfilter: Remove redundant goto in ebt_ulog_packet
    trivial: don't touch files that are removed in the staging tree
    lib/vsprintf: replace link to Draft by final RFC number
    doc: Kconfig: `to be' -> `be'
    doc: Kconfig: Typo: square -> squared
    doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
    drivers/net: static should be at beginning of declaration
    drivers/media: static should be at beginning of declaration
    drivers/i2c: static should be at beginning of declaration
    XTENSA: static should be at beginning of declaration
    SH: static should be at beginning of declaration
    MIPS: static should be at beginning of declaration
    ARM: static should be at beginning of declaration
    rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
    Update my e-mail address
    PCIe ASPM: forcedly -> forcibly
    gma500: push through device driver tree
    ...

    Fix up trivial conflicts:
    - arch/arm/mach-ep93xx/dma-m2p.c (deleted)
    - drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
    - drivers/net/r8169.c (just context changes)

    Linus Torvalds
     

22 Jul, 2011

1 commit

07 Jul, 2011

1 commit

28 Jun, 2011

1 commit

23 Jun, 2011

1 commit

  • cd1559870   ssb: add __devinit to some functions ... Browse Code »

    Two functions in ssb are using register_pci_controller() which is
    __devinit. The functions ssb_pcicore_init_hostmode() and
    ssb_gige_probe() should also be __devinit.

    This fixes the following warning:
    WARNING: vmlinux.o(.text+0x2727b8): Section mismatch in reference from the function ssb_pcicore_init_hostmode() to the function .devinit.text:register_pci_controller()
    The function ssb_pcicore_init_hostmode() references
    the function __devinit register_pci_controller().
    This is often because ssb_pcicore_init_hostmode lacks a __devinit
    annotation or the annotation of register_pci_controller is wrong.

    WARNING: vmlinux.o(.text+0x273398): Section mismatch in reference from the function ssb_gige_probe() to the function .devinit.text:register_pci_controller()
    The function ssb_gige_probe() references
    the function __devinit register_pci_controller().
    This is often because ssb_gige_probe lacks a __devinit
    annotation or the annotation of register_pci_controller is wrong.

    Reported-by: Ralf Baechle
    Signed-off-by: Hauke Mehrtens
    Signed-off-by: John W. Linville

    Hauke Mehrtens
     

14 May, 2011

1 commit

  • 1159024d4   ssb: fix pcicore build breakage ... Browse Code »

    drivers/ssb/main.c:1336: error: 'SSB_PCICORE_BCAST_ADDR' undeclared (first use in this function)
    drivers/ssb/main.c:1337: error: 'SSB_PCICORE_BCAST_DATA' undeclared (first use in this function)
    drivers/ssb/main.c:1349: error: 'struct ssb_pcicore' has no member named 'dev'

    Reported-by: Randy Dunlap
    Signed-off-by: John W. Linville

    John W. Linville
     

12 May, 2011

1 commit

27 Apr, 2011

2 commits

  • 04ad1fb26   ssb: update reject bit for Target State Low ... Browse Code »

    My 14e4:4315 is SSB_IDLOW_SSBREV_26:
    read32 0xfaafcff8 -> 0x600422d5
    My 14e4:4328 is SSB_IDLOW_SSBREV_24:
    read32 0xfaafcff8 -> 0x400422c5
    My 14e4:432b is SSB_IDLOW_SSBREV_26 again:
    read32 0xfaafcff8 -> 0x600422d5

    For all of them wl driver is using 0x2 reject bit:
    write32(0xf98)
    Signed-off-by: John W. Linville

    Rafał Miłecki
     
  • a6ef81438   ssb: mark bus as powered up earlier ... Browse Code »

    ssb_chipco_set_clockmode may want to touch CC registers to control power of the
    bus. However touching registers without powered_up set causes warnings.

    Signed-off-by: Rafał Miłecki
    Signed-off-by: John W. Linville

    Rafał Miłecki
     

19 Feb, 2011

3 commits