31 Aug, 2016
2 commits
-
Falcon Ridge 4C has been supported by the driver from the beginning,
Falcon Ridge 2C support was just added. Don't irritate users with a
warning declaring the opposite.Signed-off-by: Lukas Wunner
Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
From: Xavier Gnata
Add support to INTEL_FALCON_RIDGE_2C controller and corresponding quirk
to support suspend/resume.
Tested against 4.7 master on a MacBook Air 11" 2015.Signed-off-by: Andreas Noever
Reviewed-by: Lukas Wunner
Signed-off-by: Greg Kroah-Hartman
03 May, 2016
1 commit
-
If tb_drom_read() fails, sw->drom is freed but not set to NULL. sw->drom
is then freed again in the error path of tb_switch_alloc().The bug can be triggered by unplugging a thunderbolt device shortly after
it is detected by the thunderbolt driver.Clear sw->drom if tb_drom_read() fails.
[bhelgaas: add Fixes:, stable versions of interest]
Fixes: 343fcb8c70d7 ("thunderbolt: Fix nontrivial endpoint devices.")
Signed-off-by: Andreas Noever
Signed-off-by: Bjorn Helgaas
CC: stable@vger.kernel.org # v3.17+
CC: Lukas Wunner
09 Apr, 2016
3 commits
-
Add support for the 1st gen Light Ridge controller, which is built into
these systems:iMac12,1 2011 21.5"
iMac12,2 2011 27"
Macmini5,1 2011 i5 2.3 GHz
Macmini5,2 2011 i5 2.5 GHz
Macmini5,3 2011 i7 2.0 GHz
MacBookPro8,1 2011 13"
MacBookPro8,2 2011 15"
MacBookPro8,3 2011 17"
MacBookPro9,1 2012 15"
MacBookPro9,2 2012 13"Light Ridge (CV82524) was the very first copper Thunderbolt controller,
introduced 2010 alongside its fiber-optic cousin Light Peak (CVL2510).
Consequently the chip suffers from some teething troubles:- MSI is broken for hotplug signaling on the downstream bridges: The chip
just never sends an interrupt. It requests 32 MSIs for each of its six
bridges and the pcieport driver only allocates one per bridge. However
I've verified that even if 32 MSIs are allocated there's no interrupt
on hotplug. The only option is thus to disable MSI, which is also what
OS X does. Apparently all Thunderbolt chips up to revision 1 of Cactus
Ridge 4C are plagued by this issue so quirk those as well.- The chip supports a maximum hop_count of 32, unlike its successors
which support only 12. Fixup ring_interrupt_active() to cope with
values >= 32.- Another peculiarity is that the chip supports a maximum of 13 ports
whereas its successors support 12. However the additional port (#5)
seems to be unusable as reading its TB_CFG_PORT config space results in
TB_CFG_ERROR_INVALID_CONFIG_SPACE. Add a quirk to mark the port
disabled on the root switch, assuming that's necessary on all Macs
using this chip.Tested-by: Lukas Wunner [MacBookPro9,1]
Tested-by: William Brown [MacBookPro8,2]
Signed-off-by: Lukas Wunner
Signed-off-by: Bjorn Helgaas
Acked-by: Andreas Noever -
Fix typo in tb_cfg_print_error() message. Fix bytecount in struct
tb_drom_entry_port comment. Replace magic number in tb_switch_alloc().
Rename tb_sw_set_unpplugged() and TB_CAL_IECS to fix typos.[bhelgaas: no functional change intended]
Signed-off-by: Lukas Wunner
Signed-off-by: Bjorn Helgaas
Acked-by: Andreas Noever -
Intel Gen 1 and 2 chips use the same ID for NHI, bridges and switch. Gen 3
chips and onward use a distinct ID for the NHI.No functional change intended.
Signed-off-by: Lukas Wunner
Signed-off-by: Bjorn Helgaas
Acked-by: Andreas Noever
21 Sep, 2015
1 commit
-
The pci device ids listed in the thunderbolt driver are to restrictive,
which prevents the driver from being loaded on recent Apple MacBooks
using a thunderbolt 2 controller. In particular this prevented any
hot-plugging functionality for thunderbolt based ethernet dongles
(i.e. Apples thunderbolt gigabit ethernet broadcom tg3 based dongle
Model A1433 EMC 2590).Changing the subvendor and subdevice to PCI_ANY_ID the thunderbolt driver
loads and binds to the pci device 07:00.0 System peripheral:
Intel Corporation Device 156c which is the thunderbolt 2 controller on
the MacBookPro12,1.Successfully tested on MacBookPro12,1. With the patch the thunderbolt
module gets now loaded on boot. And it provides hot-plugging support both
for a cold-plugged and a warm-plugged ethernet dongle.Signed-off-by: Andreas Noever
Acked-by: Knuth Posern
Signed-off-by: Greg Kroah-Hartman
27 Aug, 2014
1 commit
-
Zero hops in tb_path_activate before writing a new path.
This fixes the following scenario:
- Boot with a coldplugged device
- Unplug device
- Plug device back in
- PCI hotplug failsThe hotplug operation fails because our new path matches the (now
defunct) path which was setup by the firmware for the coldplugged
device. By writing zeros before writing our path configuration we can
force thunderbolt to retrain the path.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman
14 Jul, 2014
1 commit
-
The advantage of kcalloc is, that will prevent integer overflows
which could result from the multiplication of number of elements
and size and it is also a bit nicer to read.Signed-off-by: Himangi Saraogi
Acked-by: Julia Lawall
Acked-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman
08 Jul, 2014
1 commit
-
nhi->rx_rings does not have type as struct tb_ring *, as it is a
double pointer so the elements of the array should have pointer type,
not structure type.The Coccinelle semantic patch that makes this change is as follows:
//
@disable sizeof_type_expr@
type T;
T **x;
@@x =
//Signed-off-by: Himangi Saraogi
Acked-by: Julia Lawall
Cc: Andreas Noever
Signed-off-by: Greg Kroah-Hartman
22 Jun, 2014
1 commit
-
We use __crc32c_le in ctl.c. So make sure that the dependency is there.
Reported-by: kbuild test robot
Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman
21 Jun, 2014
12 commits
-
tb_eeprom_get_drom_offset is local to this file.
Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
Force enum tb_drom_entry_type to unsigned to fix the following error:
drivers/thunderbolt/eeprom.c:202:39: error: dubious one-bit signed bitfield
Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
tb_find_cap in cap.c takes an enum tb_cap and not an u32. Fix the
declaration in tb.h.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
Thunderbolt packets are big endian. Cast pkg->buffer to __be32* when
accessing the checksum.Reported-by: kbuild test robot
Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
The result of "sizeof(struct tb_drom_entry_port)" is a size_t, which
is not necessarily the same as 'long', so we should use the appropriate
%z format string instead of %l.Signed-off-by: Arnd Bergmann
Acked-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
The thunderbolt drivers cannot be built if CONFIG_PCI is disabled,
better add an explicit Kconfig dependency.
The "default no" line is redundant and can be removed at the same
time.Signed-off-by: Arnd Bergmann
Acked-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
'nhi_ids' is local to this file.
Signed-off-by: Sachin Kamat
Acked-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
'descriptors' is a pointer. Use NULL isntead of 0.
Signed-off-by: Sachin Kamat
Acked-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
The function returns a pointer. Hence return NULL instead of 0.
Signed-off-by: Sachin Kamat
Acked-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
The function returns a pointer. Hence return NULL instead of 0.
Signed-off-by: Sachin Kamat
Acked-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
Fixes the below error:
drivers/thunderbolt/switch.c:347:2: error: implicit declaration of function ‘kzalloc’ [-Werror=implicit-function-declaration]
drivers/thunderbolt/switch.c:381:2: error: implicit declaration of function ‘kcalloc’ [-Werror=implicit-function-declaration]Signed-off-by: Sachin Kamat
Acked-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
Fixes the below error:
drivers/thunderbolt/eeprom.c:407:2: error: implicit declaration of function ‘kzalloc’ [-Werror=implicit-function-declaration]
drivers/thunderbolt/eeprom.c:444:2: error: implicit declaration of function ‘kfree’ [-Werror=implicit-function-declaration]Signed-off-by: Sachin Kamat
Acked-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman
20 Jun, 2014
15 commits
-
Fix issues observed with the Startech docking station:
Fix the type of the route parameter in tb_ctl_rx. It should be u64 and not
u8 (which only worked for short routes).A thunderbolt cable contains two lanes. If both endpoints support it a
connection will be established on both lanes. Previously we tried to
scan below both "dual link ports". Use the information extracted from
the drom to only scan behind ports with lane_nr == 0.Endpoints with more complex thunderbolt controllers have some of their
ports disabled (for example the NHI port or one of the HDMI/DP ports).
Accessing them results in an error so we now ignore ports which are
marked as disabled in the drom.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
All Thunderbolt switches (except the root switch) contain a drom which
contains information about the device. Right now we only read the UID.Add code to read and parse this drom. For now we are only interested in
which ports are disabled and which ports are "dual link ports" (a
physical thunderbolt port/socket contains two such ports).Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
We use _noirq since we have to restore the pci tunnels before the pci
core wakes the tunneled devices.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
Add eeprom access code and read the uid during switch initialization.
The UID will be used to check device identity after suspend.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
A pci downstream and pci upstream port can be connected through a
tunnel. To establish the tunnel we have to setup two unidirectional
paths between the two ports.Right now we only support paths with two hops (i.e. no chaining) and at
most one pci device per thunderbolt device.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
A thunderbolt path is a unidirectional channel between two thunderbolt
ports. Two such paths are needed to establish a pci tunnel.This patch introduces struct tb_path as well as a set of tb_path_*
methods which are used to activate & deactivate paths.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
We receive a plug event callback whenever a thunderbolt device is added
or removed. This patch fills in the tb_handle_hotplug method and starts
reacting to these events by adding/removing switches from the hierarchy.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
Add utility methods tb_port_state and tb_wait_for_port. Add
tb_scan_switch which recursively checks for downstream switches.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
Thunderbolt switches have a plug events capability. This patch adds the
tb_plug_events_active method and uses it to activate plug events during
switch allocation.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
Thunderbolt config areas contain capability lists similar to those found
on pci devices. This patch introduces a tb_find_cap utility method to
search for capabilities.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
This patch adds the structures tb_switch and tb_port as well as code to
initialize the root switch.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
Every thunderbolt device consists (logically) of a switch with multiple
ports. Every port contains up to four config regions (HOPS, PORT,
SWITCH, COUNTERS) which are used to configure the device.The tb_regs.h file contains all known registers and capabilities from
these config regions.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
Add struct tb which will contain our view of the thunderbolt bus. For
now it just contains a pointer to the control channel and a workqueue
for hotplug events.Add thunderbolt_alloc_and_start() and thunderbolt_shutdown_and_free()
which are responsible for setup and teardown of struct tb.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
Thunderbolt devices are configured by reading/writing into their
configuration space (similar to pci). This is done by sending packets
through the NHI (native host interface) onto the control channel.This patch handles the low level packet based protocol and exposes
higher level operations like tb_cfg_read/tb_cfg_write.Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman -
Thunderbolt hotplug is supposed to be handled by the firmware. But Apple
decided to implement thunderbolt at the operating system level. The
firmare only initializes thunderbolt devices that are present at boot
time. This driver enables hotplug of thunderbolt of non-chained
thunderbolt devices on Apple systems with a cactus ridge controller.This first patch adds the Kconfig file as well the parts of the driver
which talk directly to the hardware (that is pci device setup, interrupt
handling and RX/TX ring management).Signed-off-by: Andreas Noever
Signed-off-by: Greg Kroah-Hartman