04 Dec, 2019
1 commit
10 Jul, 2019
1 commit
24 Jan, 2019
1 commit
24 Jan, 2018
1 commit
11 Jan, 2018
1 commit
18 Sep, 2017
3 commits
-
…with 6Q_SD, 90 degree difference. 100%
The position of MMA8451Q on 6qp board is not the same with 6q.
Correct the init position value in 6qp sabresd dts.Signed-off-by: zhang sanshan <b51434@freescale.com>
Conflicts:
arch/arm/boot/dts/imx6qp-sabresd.dtsChange-Id: I819a47be1d5ee67748e3b6bf509f5cb7ebb88216
-
Add 900MHz/1.25V setpoint according the latest datasheet(Rev.1,2/2017),
we add a 25mV voltage margin to cover the IR frop and board tolerance.Signed-off-by: Bai Ping
(cherry picked from commit 9c31f7bf938adb9a808ea7bf637ccecf53f6e7be) -
According to the latest datasheet(Rev.1,02/2017), when the internal LDO
is enabled, the ARM core can run at 900MHz. We need to check the
speed grading fuse to determine the max ARM core frequency.Signed-off-by: Bai Ping
(cherry picked from commit cc0edd14c5fc3b5590302572687b08f80563c683)
01 Sep, 2017
1 commit
-
The pcie dts node is dulicated, remove none-used one.
Signed-off-by: Richard Zhu
(cherry picked from commit c8b814b448d9ab3485d1f6c146da6dff03c63706)
23 Aug, 2017
1 commit
-
disable dcp(data co-process) which used in android encryption.
use software to do encryption.Change-Id: I434e69522baac8dc6eb12acee53216c592bf8a69
Signed-off-by: zhang sanshan
22 Aug, 2017
1 commit
-
Conflicts:
arch/arm/boot/dts/imx6sx-sabreauto.dts
15 Aug, 2017
1 commit
-
Add i2c bus recovery support to recover i2c2 bus from dead lock status.
Signed-off-by: Gao Pan
07 Aug, 2017
1 commit
-
Update imx6ull header file with the latest imx6ull RDP.
- add new pin function definitions.
- update pin function changes.Signed-off-by: Fugang Duan
Reviewed-by: Richard Zhu
19 Jul, 2017
3 commits
-
lcdif2 node has a property called "display" and a subnode that is also
called "display", leading to an OF duplicate warning at boot time.Fix this by changing the subnode's name to "display@1".
Signed-off-by: Cristina Ciocan
(cherry picked from commit 7aa2c6011a8a074b880330a7f3989ea9f23e03b3) -
This reverts commit d7d6f210522188 ("ARM: dts: imx6sx-sdb: Change audio
PLL frequency for SSI") because it breaks MQS.MQS uses IMX6SX_CLK_SAI1 as master clock and it requires mclk rate to be
24576000. No other rate is supported.Anyhow, due to change to fix MLK-14865 sai1 clk is changed to 36864000.
Signed-off-by: Daniel Baluta
18 Jul, 2017
1 commit
-
Correct the CD pin for baseboard SD slot, otherwise
the card detection can't work.Signed-off-by: Haibo Chen
(cherry picked from commit 9869e681727490c3c23811a26bfc0e294cccd778)
14 Jul, 2017
1 commit
-
…d8b211839d963889dbbe2b0aa3ae11
13 Jul, 2017
22 commits
-
This CTS module (CtsAtraceHostTestCases) needs tracing node
in /sys. Add trace releated CONFIG_ option.Change-Id: I27c29278ca5962609b52a1a6c26fc2ce0c6c6a0c
Signed-off-by: Jindong -
Remove conflict dts pinctrl configs for wifi.
And remove duplicate dts pinctrl configs.Change-Id: Id8eb0333f049f3cc4ec8180f7bf3aff37444c320
Signed-off-by: Tian Yang -
…d963889dbbe2b0aa3ae11
-
add RGBA32 format to 6sx_sdb and 7ulp_evk.
Change-Id: Id410aac9d637054ca05bb20b2f916bb86853b8f5
Signed-off-by: ivan.liu -
add RGBA32 format to 7d_sdb, 6sl_evk, 6sx_sdb and 6sx_auto.
Change-Id: Idc689f9d9f552d2be274008a46529172871ae13a
Signed-off-by: ivan.liu -
…d963889dbbe2b0aa3ae11
-
…d963889dbbe2b0aa3ae11
Conflicts:
arch/arm/boot/dts/imx6qdl-sabresd.dtsi
drivers/video/fbdev/mxc/mxsfb_sii902x.c -
ota failed for apk can't get the ota image in kernel4.9.
The product of imx7d change from i.MX7D(kernel4.1) to i.MX7(kernel4.9).Change-Id: Id9402933804e73e1f545a8589eb4f936f1a1e807
Signed-off-by: zhang sanshan -
Enable vndbinder device else mediacodecservice crash with below log.
2471 I /vendor/bin/hw/android.hardware.media.omx@1.0-service: mediacodecservice starting
2471 W ProcessState: Opening '/dev/vndbinder' failed: No such file or directory
2471 F ProcessState: Binder driver could not be opened. Terminating.
2471 F libc : Fatal signal 6 (SIGABRT), code -6 in tid 2471 (android.hardwar)Change-Id: I2563fb664bbd8f3b130a817568fd4708d9f76f6f
Signed-off-by: Richard Liu -
Android native fence start using sync_file/fence in 4.9 kernel,
need enable CONFIG_SYNC_FILE in android kernel configure.Change-Id: I1cedbc76f9d30dddd4ed0a6ced5c15f85e5ad844
Signed-off-by: Richard Liu -
change the key map on evk board in kernel 3.14.
Change-Id: I92cd79f8e08c460215b7f4fe35e69552950ff543
Signed-off-by: zhang sanshan -
can't use the power key on auto dq/dl board.
This patch enable Power Button.Signed-off-by: Zhang Sanshan
Conflicts:
arch/arm/boot/dts/imx6qdl-sabreauto.dtsiChange-Id: Ibe6a1b2c71e223263cdbb242994c98e8001c433f
-
Cherry pick from following commit, but move the gpio-keys node
from imx7d.dtsi to imx7d-sdb.dts because of compile error.commit 799711cbe58637f09000b65b205d6f34979f113b
Author: Zhang Sanshan
Date: Wed Mar 25 21:48:49 2015 +0800MA-6460 map the volume up and down key in sabresd-7d board
map volume up key to s1
map volume down key to s3Signed-off-by: Zhang Sanshan
Change-Id: I3ceb1eb3b8064d02365c5739cc71d4d44aa9db6f
Signed-off-by: Zhang Bo -
Modem_reset will occupy bt_reg_on pin which controled
by rfkill in Android environment. So remove the
modem_reset in imx7d-sdb board.Change-Id: I39df33f2055d9a5e520fcc6880b30913ab292cbc
Signed-off-by: Haoran.Wang -
This patch remove cma configuration from DTS on 7ulp board,
it follows patch 42caebf1a5307c9267, below are the reasons
we need do that on android.1. cma memory will default reserved from high memory, it is not
suitable for 1G/3G kernel configure as more vmalloc size is
need to do map.
2. cma configure from bootargs is more convenient.Change-Id: Ia795565fa8a71fd158929f9c96d01e16cc42056a
Signed-off-by: Richard Liu -
Add CONFIG_GPU_LOW_MEMORY_KILLER to gpu driver kconfig.
Enable it in android default config.Signed-off-by: Xiaowen Liu
Conflicts:
arch/arm/configs/imx_v7_android_defconfig -
Remove unnecessary delay in bt_rfkill and use sleep instead of sdelay.
Change-Id: I9c44fa8bc137c19db959f5a4915b863e717fb6f1
Signed-off-by: Richard Liu -
performance governor is not added in scaling_available_governors,
need support performance governor as some benchmark should test
on performance mode.BSP set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y, it will auto add
CPU_FREQ_GOV_PERFORMANCE in drivers/cpufreq/Kconfig, but android
set CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y so we need indicate
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y in imx_v7_android_defconfig.Signed-off-by: Richard Liu
-
Replace the volume-up key function with power key function.
change the dts file and replace the KEY_VOLUMEUP with KEY_POWER
The m4 demo image has changed to support power key and volume-down key only.Add wakeup property for power key function.
Change-Id: Ie66b1f4a6996683a8850d824aea4be08bf05d048
Signed-off-by: Zhang Bo -
merge to imx_4.9.y_android
Enable CONFIG_KEYBOARD_RPMSG and CONFIG_FB_MXC_ADV7535 configs in imx_4.9.y_android.
The drivers exist in android branch after merge from imx_4.9.yChange-Id: I14e764dbc5fe683f58e0dc319efd18e3e5de5ec2
Signed-off-by: Zhang Bo -
…d963889dbbe2b0aa3ae11
Conflicts:
drivers/cpufreq/cpufreq_interactive.c -
disable lcdif to make sure epdc is fb0
Change-Id: I5895b28ffb8c4e75cc8ae3f309df64cadc450149
Signed-off-by: fang hui
