<?xml version="1.0" encoding="utf-8"?>
<!--
/*
** Copyright 2011, The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
**     http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
-->

<!-- These resources are around just to allow their values to be customized
     for different hardware and product builds. -->
<resources>

    <!--For Android we support eth0 now -->
    <string translatable="false" name="config_ethernet_iface_regex">eth0</string>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         USB interfaces.  If the device doesn't want to support tething over USB this should
         be empty.  An example would be "usb.*" -->
     <string-array translatable="false" name="config_tether_usb_regexs">
       <item>usb0</item>
     </string-array>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         Wifi interfaces.  If the device doesn't want to support tethering over Wifi this
         should be empty.  An example would be "softap.*" -->
    <string-array translatable="false" name="config_tether_wifi_regexs">
      <item>"wlan0"</item>
    </string-array>

    <!-- List of regexpressions describing the interface (if any) that represent tetherable
         bluetooth interfaces.  If the device doesn't want to support tethering over bluetooth this
         should be empty. -->
    <string-array translatable="false" name="config_tether_bluetooth_regexs">
        <item>"bt-pan"</item>
        </string-array>

    <!-- Array of ConnectivityManager.TYPE_xxxx values allowable for tethering -->
    <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or
    <!== [0,1,5,7,9] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI, TYPE_BLUETOOTH and TYPE_ETHERNET -->
    <integer-array translatable="false" name="config_tether_upstream_types">
        <item>0</item>
        <item>1</item>
        <item>5</item>
        <item>7</item>
        <item>9</item>
    </integer-array>

    <!-- Flag indicating whether we should enable the automatic brightness in Settings.
         config_hardware_automatic_brightness_available is not set, so we will use software implementation -->
    <bool name="config_automatic_brightness_available">true</bool>

    <!-- An Array of "[ConnectivityManager connectionType],
                      [# simultaneous connection types]"  -->
    <string-array translatable="false" name="radioAttributes">
        <item>"1,1"</item>
        <item>"7,1"</item>
        <item>"9,1"</item>
    </string-array>

    <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
         [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
    <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
         before automatically restore the default connection.  Set -1 if the connection
         does not require auto-restore. -->
    <!-- the 6th element indicates boot-time dependency-met value. -->
    <string-array translatable="false" name="networkAttributes">
        <item>"wifi,1,1,1,-1,true"</item>
        <item>"wifi_p2p,13,1,0,-1,true"</item>
        <item>"bluetooth,7,7,0,-1,true"</item>
        <item>"ethernet,9,9,2,-1,true"</item>
    </string-array>

    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
         The N entries of this array define N + 1 zones as follows:

         Zone 0:        0 <= LUX < array[0]
         Zone 1:        array[0] <= LUX < array[1]
         ...
         Zone N:        array[N - 1] <= LUX < array[N]
         Zone N + 1:    array[N] <= LUX < infinity

         Must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessLevels">
        <item>5</item>
        <item>15</item>
        <item>50</item>
        <item>100</item>
        <item>200</item>
        <item>400</item>
        <item>1000</item>
        <item>2000</item>
        <item>3000</item>
        <item>5000</item>
        <item>10000</item>
        <item>30000</item>
    </integer-array>

    <!-- Array of output values for LCD backlight corresponding to the LUX values
         in the config_autoBrightnessLevels array.  This array should have size one greater
         than the size of the config_autoBrightnessLevels array.
         This must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessLcdBacklightValues">
        <item>5</item>    <!-- 0-5 -->
        <item>20</item>   <!-- 5-15 -->
        <item>30</item>   <!-- 15-50 -->
        <item>40</item>   <!-- 50-100 -->
        <item>50</item>   <!-- 100-200 -->
        <item>60</item>   <!-- 200-400 -->
        <item>70</item>   <!-- 400-1000 -->
        <item>80</item>   <!-- 1000-2000 -->
        <item>130</item>  <!-- 2000-3000 -->
        <item>180</item>  <!-- 3000-5000 -->
        <item>255</item>  <!-- 5000-10000 -->
        <item>255</item>  <!-- 10000-30000 -->
        <item>255</item>  <!-- 30000+ -->
    </integer-array>

    <!-- Array of output values for button backlight corresponding to the LUX values
         in the config_autoBrightnessLevels array.  This array should have size one greater
         than the size of the config_autoBrightnessLevels array.
         This must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessButtonBacklightValues">
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
    </integer-array>

    <!-- Array of output values for keyboard backlight corresponding to the LUX values
         in the config_autoBrightnessLevels array.  This array should have size one greater
         than the size of the config_autoBrightnessLevels array.
         This must be overridden in platform specific overlays -->
    <integer-array name="config_autoBrightnessKeyboardBacklightValues">
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
        <item>0</item>
    </integer-array>

    <integer name="config_screenBrightnessDim">5</integer>

    <!--  Maximum number of supported users -->
    <integer name="config_multiuserMaximumUsers">8</integer>
    <!--  Whether Multiuser UI should be shown -->
    <bool name="config_enableMultiUserUI">true</bool>

    <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
         autodetected from the Configuration. -->
    <bool name="config_showNavigationBar">true</bool>

    <bool name="config_navBarCanMove">true</bool>

    <!-- This device is not "voice capable"; it's data-only. -->
    <bool name="config_voice_capable">false</bool>

    <!-- Boolean indicating whether the wifi chipset has dual frequency band support -->
    <bool translatable="false" name="config_wifi_dual_band_support">true</bool>

    <!-- Boolean indicating whether system support sustained performance mode. -->
    <bool name="config_sustainedPerformanceModeSupported">true</bool>

</resources>