/* SPDX-License-Identifier: GPL-2.0+ */

  /*

   * (C) Copyright 2009-2014
   * Gerald Kerma <dreagle@doukki.net>

   * Marvell Semiconductor <www.marvell.com>
   * Written-by: Prafulla Wadaskar <prafulla@marvell.com>

   */
  
  #ifndef _CONFIG_SHEEVAPLUG_H
  #define _CONFIG_SHEEVAPLUG_H
  
  /*

   * High Level Configuration Options (easy to change)
   */

  #define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */

  
  /*

   * Commands configuration
   */

  /*

   * Standard filesystems
   */

  #define CONFIG_BZIP2

  
  /*

   * mv-plug-common.h should be defined after CMD configs since it used them

   * to enable certain macros

   */

  #include "mv-plug-common.h"

  
  /*
   *  Environment variables configurations
   */
  #ifdef CONFIG_CMD_NAND

  #define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */

  #endif
  /*
   * max 4k env size is enough, but in case of nand
   * it has to be rounded to sector size
   */
  #define CONFIG_ENV_SIZE			0x20000	/* 128k */

  #define CONFIG_ENV_ADDR			0x80000
  #define CONFIG_ENV_OFFSET		0x80000	/* env starts here */

  /*
   * Environment is right behind U-Boot in flash. Make sure U-Boot
   * doesn't grow into the environment area.
   */
  #define CONFIG_BOARD_SIZE_LIMIT		CONFIG_ENV_OFFSET

  
  /*
   * Default environment variables
   */
  #define CONFIG_BOOTCOMMAND		"${x_bootcmd_kernel}; "	\
  	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\

  	"bootm 0x6400000;"

  #define CONFIG_EXTRA_ENV_SETTINGS	"x_bootargs=console"	\

  	"=ttyS0,115200 mtdparts="CONFIG_MTDPARTS_DEFAULT	\

  	"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \

  	"x_bootcmd_usb=usb start\0" \
  	"x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
  
  /*

   * Ethernet Driver configuration
   */
  #ifdef CONFIG_CMD_NET

  #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */

  #define CONFIG_PHY_BASE_ADR	0

  #endif /* CONFIG_CMD_NET */
  
  /*

   * SDIO/MMC Card Configuration
   */
  #ifdef CONFIG_CMD_MMC

  #define CONFIG_MVEBU_MMC
  #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
  #endif /* CONFIG_CMD_MMC */
  
  /*

   * SATA driver configuration
   */

  #ifdef CONFIG_IDE

  #define __io
  #define CONFIG_IDE_PREINIT

  #define CONFIG_MVSATA_IDE_USE_PORT0
  #define CONFIG_MVSATA_IDE_USE_PORT1
  #define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
  #define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET

  #endif /* CONFIG_IDE */

  #endif /* _CONFIG_SHEEVAPLUG_H */