/* SPDX-License-Identifier: GPL-2.0+ */

  /*
   * Copyright (C) 2013 Seco S.r.l
   *
   * Configuration settings for the Seco Boards.

   */
  
  #ifndef __CONFIG_H
  #define __CONFIG_H
  
  #include "mx6_common.h"

  #define CONFIG_BOARD_REVISION_TAG
  
  /* Size of malloc() pool */
  #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

  #define CONFIG_MXC_UART
  #define CONFIG_MXC_UART_BASE		UART2_BASE

  #define CONFIG_SYS_MEMTEST_START	0x10000000
  #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)

  
  /* MMC Configuration */

  #define CONFIG_SYS_FSL_USDHC_NUM        2
  #define CONFIG_SYS_FSL_ESDHC_ADDR	0

  /* Ethernet Configuration */

  #define CONFIG_FEC_MXC

  #define IMX_FEC_BASE			ENET_BASE_ADDR
  #define CONFIG_FEC_XCV_TYPE		RGMII
  #define CONFIG_ETHPRIME			"FEC"
  #define CONFIG_FEC_MXC_PHYADDR		6

  
  #define CONFIG_EXTRA_ENV_SETTINGS					\
  	"netdev=eth0\0"							\
  	"ethprime=FEC0\0"						\
  	"netdev=eth0\0"							\
  	"ethprime=FEC0\0"						\
  	"uboot=u-boot.bin\0"						\
  	"kernel=uImage\0"						\
  	"nfsroot=/opt/eldk/arm\0"					\
  	"ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0"		\
  	"ip_server=10.0.0.1\0"						\
  	"nfs_path=/targetfs \0"						\
  	"memory=mem=1024M\0"						\
  	"bootdev=mmc dev 0; ext2load mmc 0:1\0"				\
  	"root=root=/dev/mmcblk0p1\0"					\
  	"option=rootwait rw fixrtc rootflags=barrier=1\0"		\
  	"cpu_freq=arm_freq=996\0"					\
  	"setbootargs=setenv bootargs console=ttymxc1,115200 ${root}"	\
  		" ${option} ${memory} ${cpu_freq}\0"			\
  	"setbootargs_nfs=setenv bootargs console=ttymxc1,115200"	\
  		" root=/dev/nfs  nfsroot=${ip_server}:${nfs_path}"	\
  		" nolock,wsize=4096,rsize=4096  ip=:::::eth0:dhcp"	\
  		" ${memory} ${cpu_freq}\0"				\
  	"setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0"	\
  	"bootcmd=run setbootargs; run setbootdev; run boot_dev;"	\
  		" bootm 0x10800000\0"					\
  	"stdin=serial\0"						\
  	"stdout=serial\0"						\
  	"stderr=serial\0"

  #define CONFIG_SYS_HZ			1000

  /* Physical Memory Map */

  #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
  #define PHYS_SDRAM_SIZE			(2u * 1024 * 1024 * 1024)
  
  #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
  #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
  #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
  
  #define CONFIG_SYS_INIT_SP_OFFSET	\
  	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  #define CONFIG_SYS_INIT_SP_ADDR		\
  	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

  /* Environment organization */

  #define CONFIG_ENV_SIZE			(8 * 1024)
  
  #if defined(CONFIG_ENV_IS_IN_MMC)
  	#define CONFIG_ENV_OFFSET		(6 * 128 * 1024)
  	#define CONFIG_SYS_MMC_ENV_DEV		0
  	#define CONFIG_DYNAMIC_MMC_DEVNO
  #endif

  #endif /* __CONFIG_H */