#ifndef __SERIAL_H__
  #define __SERIAL_H__

  #include <post.h>

  struct serial_device {

  	/* enough bytes to match alignment of following func pointer */

  	char	name[16];

  	int	(*start)(void);
  	int	(*stop)(void);

  	void	(*setbrg)(void);
  	int	(*getc)(void);
  	int	(*tstc)(void);
  	void	(*putc)(const char c);
  	void	(*puts)(const char *s);

  #if CONFIG_POST & CONFIG_SYS_POST_UART

  	void	(*loop)(int);

  #endif

  	struct serial_device	*next;

  };

  void default_serial_puts(const char *s);

  extern struct serial_device serial_smc_device;
  extern struct serial_device serial_scc_device;

  extern struct serial_device *default_serial_console(void);

  #if	defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \

  	defined(CONFIG_MPC86xx) || \

  	defined(CONFIG_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \

  	defined(CONFIG_MICROBLAZE)

  extern struct serial_device serial0_device;
  extern struct serial_device serial1_device;

  #endif

  extern struct serial_device eserial1_device;
  extern struct serial_device eserial2_device;

  extern struct serial_device eserial3_device;
  extern struct serial_device eserial4_device;
  extern struct serial_device eserial5_device;
  extern struct serial_device eserial6_device;

  extern void serial_register(struct serial_device *);

  extern void serial_initialize(void);

  extern void serial_stdio_init(void);

  extern int serial_assign(const char *name);

  extern void serial_reinit_all(void);

  /* For usbtty */

  #ifdef CONFIG_USB_TTY

  extern int usbtty_getc(void);
  extern void usbtty_putc(const char c);
  extern void usbtty_puts(const char *str);
  extern int usbtty_tstc(void);

  #else
  
  /* stubs */
  #define usbtty_getc() 0
  #define usbtty_putc(a)
  #define usbtty_puts(a)
  #define usbtty_tstc() 0
  
  #endif /* CONFIG_USB_TTY */

  struct udevice;
  
  /**
   * struct struct dm_serial_ops - Driver model serial operations
   *
   * The uclass interface is implemented by all serial devices which use
   * driver model.
   */
  struct dm_serial_ops {
  	/**
  	 * setbrg() - Set up the baud rate generator
  	 *
  	 * Adjust baud rate divisors to set up a new baud rate for this
  	 * device. Not all devices will support all rates. If the rate
  	 * cannot be supported, the driver is free to select the nearest
  	 * available rate. or return -EINVAL if this is not possible.
  	 *
  	 * @dev: Device pointer
  	 * @baudrate: New baud rate to use
  	 * @return 0 if OK, -ve on error
  	 */
  	int (*setbrg)(struct udevice *dev, int baudrate);
  	/**
  	 * getc() - Read a character and return it
  	 *
  	 * If no character is available, this should return -EAGAIN without
  	 * waiting.
  	 *
  	 * @dev: Device pointer
  	 * @return character (0..255), -ve on error
  	 */
  	int (*getc)(struct udevice *dev);
  	/**

  	 * puts() - puts a string
  	 *
  	 * @dev: Device pointer
  	 * @str: string to write
  	 * @return 0 if OK, -ve on error
  	 */
  	int (*puts)(struct udevice *dev, const char *str);
  	/**

  	 * putc() - Write a character
  	 *
  	 * @dev: Device pointer
  	 * @ch: character to write
  	 * @return 0 if OK, -ve on error
  	 */
  	int (*putc)(struct udevice *dev, const char ch);
  	/**
  	 * pending() - Check if input/output characters are waiting
  	 *
  	 * This can be used to return an indication of the number of waiting
  	 * characters if the driver knows this (e.g. by looking at the FIFO
  	 * level). It is acceptable to return 1 if an indeterminant number
  	 * of characters is waiting.
  	 *
  	 * This method is optional.
  	 *
  	 * @dev: Device pointer
  	 * @input: true to check input characters, false for output
  	 * @return number of waiting characters, 0 for none, -ve on error
  	 */
  	int (*pending)(struct udevice *dev, bool input);
  	/**
  	 * clear() - Clear the serial FIFOs/holding registers
  	 *
  	 * This method is optional.
  	 *
  	 * This quickly clears any input/output characters from the UART.
  	 * If this is not possible, but characters still exist, then it
  	 * is acceptable to return -EAGAIN (try again) or -EINVAL (not
  	 * supported).
  	 *
  	 * @dev: Device pointer
  	 * @return 0 if OK, -ve on error
  	 */
  	int (*clear)(struct udevice *dev);
  #if CONFIG_POST & CONFIG_SYS_POST_UART
  	/**
  	 * loop() - Control serial device loopback mode
  	 *
  	 * @dev: Device pointer
  	 * @on: 1 to turn loopback on, 0 to turn if off
  	 */
  	int (*loop)(struct udevice *dev, int on);
  #endif
  };
  
  /**
   * struct serial_dev_priv - information about a device used by the uclass
   *

   * @sdev:	stdio device attached to this uart
   *
   * @buf:	Pointer to the RX buffer
   * @rd_ptr:	Read pointer in the RX buffer
   * @wr_ptr:	Write pointer in the RX buffer

   */
  struct serial_dev_priv {
  	struct stdio_dev *sdev;

  
  	char *buf;
  	int rd_ptr;
  	int wr_ptr;

  };
  
  /* Access the serial operations for a device */
  #define serial_get_ops(dev)	((struct dm_serial_ops *)(dev)->driver->ops)

  void amirix_serial_initialize(void);
  void arc_serial_initialize(void);
  void arm_dcc_initialize(void);
  void asc_serial_initialize(void);
  void atmel_serial_initialize(void);
  void au1x00_serial_initialize(void);
  void bfin_jtag_initialize(void);
  void bfin_serial_initialize(void);
  void bmw_serial_initialize(void);
  void clps7111_serial_initialize(void);
  void cogent_serial_initialize(void);
  void cpci750_serial_initialize(void);
  void evb64260_serial_initialize(void);
  void imx_serial_initialize(void);
  void iop480_serial_initialize(void);
  void jz_serial_initialize(void);

  void leon2_serial_initialize(void);
  void leon3_serial_initialize(void);
  void lh7a40x_serial_initialize(void);
  void lpc32xx_serial_initialize(void);
  void marvell_serial_initialize(void);
  void max3100_serial_initialize(void);
  void mcf_serial_initialize(void);
  void ml2_serial_initialize(void);

  void mpc85xx_serial_initialize(void);
  void mpc8xx_serial_initialize(void);
  void mxc_serial_initialize(void);
  void mxs_auart_initialize(void);
  void ns16550_serial_initialize(void);
  void oc_serial_initialize(void);
  void p3mx_serial_initialize(void);
  void pl01x_serial_initialize(void);
  void pxa_serial_initialize(void);
  void s3c24xx_serial_initialize(void);
  void s5p_serial_initialize(void);
  void sa1100_serial_initialize(void);
  void sandbox_serial_initialize(void);
  void sconsole_serial_initialize(void);
  void sh_serial_initialize(void);
  void uartlite_serial_initialize(void);
  void zynq_serial_initialize(void);

  #endif