/*

   * Copyright 2013-2014 Freescale Semiconductor, Inc.

   *
   * See file CREDITS for list of people who contributed to this
   * project.
   *
   * This program is free software; you can redistribute it and/or
   * modify it under the terms of the GNU General Public License as
   * published by the Free Software Foundation; either version 2 of
   * the License, or (at your option) any later version.
   *
   * This program is distributed in the hope that it will be useful,
   * but WITHOUT ANY WARRANTY; without even the implied warranty of
   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
   * GNU General Public License for more details.
   *
   * You should have received a copy of the GNU General Public License
   * along with this program; if not, write to the Free Software
   * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
   * MA 02111-1307 USA
   */
  
  #ifndef __CONFIG_H
  #define __CONFIG_H
  
  /*
   * T1040 QDS board configuration file
   */

  
  #ifdef CONFIG_RAMBOOT_PBL
  #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
  #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc

  #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t1040qds/t1040_pbi.cfg
  #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t1040qds/t1040_rcw.cfg

  #endif
  
  /* High Level Configuration Options */

  #define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */

  #define CONFIG_MP			/* support multiple processors */

  /* support deep sleep */
  #define CONFIG_DEEP_SLEEP

  #ifndef CONFIG_RESET_VECTOR_ADDRESS
  #define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
  #endif
  
  #define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */

  #define CONFIG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS

  #define CONFIG_PCI_INDIRECT_BRIDGE

  #define CONFIG_PCIE1			/* PCIE controller 1 */
  #define CONFIG_PCIE2			/* PCIE controller 2 */
  #define CONFIG_PCIE3			/* PCIE controller 3 */
  #define CONFIG_PCIE4			/* PCIE controller 4 */

  
  #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
  #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */

  #define CONFIG_ENV_OVERWRITE

  #ifndef CONFIG_MTD_NOR_FLASH

  #else
  #define CONFIG_FLASH_CFI_DRIVER
  #define CONFIG_SYS_FLASH_CFI
  #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  #endif

  #ifdef CONFIG_MTD_NOR_FLASH

  #if defined(CONFIG_SPIFLASH)
  #define CONFIG_SYS_EXTRA_ENV_RELOC

  #define CONFIG_ENV_SPI_BUS              0
  #define CONFIG_ENV_SPI_CS               0
  #define CONFIG_ENV_SPI_MAX_HZ           10000000
  #define CONFIG_ENV_SPI_MODE             0
  #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  #define CONFIG_ENV_SECT_SIZE            0x10000
  #elif defined(CONFIG_SDCARD)
  #define CONFIG_SYS_EXTRA_ENV_RELOC

  #define CONFIG_SYS_MMC_ENV_DEV          0
  #define CONFIG_ENV_SIZE			0x2000

  #define CONFIG_ENV_OFFSET		(512 * 1658)

  #elif defined(CONFIG_NAND)
  #define CONFIG_SYS_EXTRA_ENV_RELOC

  #define CONFIG_ENV_SIZE			CONFIG_SYS_NAND_BLOCK_SIZE

  #define CONFIG_ENV_OFFSET		(7 * CONFIG_SYS_NAND_BLOCK_SIZE)

  #else

  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
  #define CONFIG_ENV_SIZE		0x2000
  #define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
  #endif

  #else /* CONFIG_MTD_NOR_FLASH */

  #define CONFIG_ENV_SIZE                0x2000
  #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
  #endif
  
  #ifndef __ASSEMBLY__
  unsigned long get_board_sys_clk(void);
  unsigned long get_board_ddr_clk(void);
  #endif
  
  #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk() /* sysclk for MPC85xx */
  #define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk()
  
  /*
   * These can be toggled for performance analysis, otherwise use default.
   */
  #define CONFIG_SYS_CACHE_STASHING
  #define CONFIG_BACKSIDE_L2_CACHE
  #define CONFIG_SYS_INIT_L2CSR0		L2CSR0_L2E
  #define CONFIG_BTB			/* toggle branch predition */
  #define CONFIG_DDR_ECC
  #ifdef CONFIG_DDR_ECC
  #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  #define CONFIG_MEM_INIT_VALUE		0xdeadbeef
  #endif
  
  #define CONFIG_ENABLE_36BIT_PHYS
  
  #define CONFIG_ADDR_MAP
  #define CONFIG_SYS_NUM_ADDR_MAP		64	/* number of TLB1 entries */
  
  #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
  #define CONFIG_SYS_MEMTEST_END		0x00400000
  #define CONFIG_SYS_ALT_MEMTEST

  
  /*
   *  Config the L3 Cache as L3 SRAM
   */
  #define CONFIG_SYS_INIT_L3_ADDR		0xFFFC0000
  
  #define CONFIG_SYS_DCSRBAR		0xf0000000
  #define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
  
  /* EEPROM */
  #define CONFIG_ID_EEPROM
  #define CONFIG_SYS_I2C_EEPROM_NXID
  #define CONFIG_SYS_EEPROM_BUS_NUM	0
  #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
  #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
  #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
  #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
  
  /*
   * DDR Setup
   */
  #define CONFIG_VERY_BIG_RAM
  #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
  #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE

  #define CONFIG_DIMM_SLOTS_PER_CTLR	1

  #define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)

  
  #define CONFIG_DDR_SPD

  #define CONFIG_FSL_DDR_INTERACTIVE

  
  #define CONFIG_SYS_SPD_BUS_NUM	0
  #define SPD_EEPROM_ADDRESS	0x51
  
  #define CONFIG_SYS_SDRAM_SIZE	4096	/* for fixed parameter use */
  
  /*
   * IFC Definitions
   */
  #define CONFIG_SYS_FLASH_BASE	0xe0000000
  #define CONFIG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_FLASH_BASE)
  
  #define CONFIG_SYS_NOR0_CSPR_EXT	(0xf)
  #define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
  				+ 0x8000000) | \
  				CSPR_PORT_SIZE_16 | \
  				CSPR_MSEL_NOR | \
  				CSPR_V)
  #define CONFIG_SYS_NOR1_CSPR_EXT	(0xf)
  #define CONFIG_SYS_NOR1_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
  				CSPR_PORT_SIZE_16 | \
  				CSPR_MSEL_NOR | \
  				CSPR_V)
  #define CONFIG_SYS_NOR_AMASK	IFC_AMASK(128*1024*1024)

  
  /*
   * TDM Definition
   */
  #define T1040_TDM_QUIRK_CCSR_BASE	0xfe000000

  /* NOR Flash Timing Params */
  #define CONFIG_SYS_NOR_CSOR	CSOR_NAND_TRHZ_80
  #define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
  				FTIM0_NOR_TEADC(0x5) | \
  				FTIM0_NOR_TEAHC(0x5))
  #define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \
  				FTIM1_NOR_TRAD_NOR(0x1A) |\
  				FTIM1_NOR_TSEQRAD_NOR(0x13))
  #define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x4) | \
  				FTIM2_NOR_TCH(0x4) | \
  				FTIM2_NOR_TWPH(0x0E) | \
  				FTIM2_NOR_TWP(0x1c))
  #define CONFIG_SYS_NOR_FTIM3	0x0
  
  #define CONFIG_SYS_FLASH_QUIET_TEST
  #define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
  
  #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
  #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
  #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
  #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
  
  #define CONFIG_SYS_FLASH_EMPTY_INFO
  #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS \
  					+ 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
  #define CONFIG_FSL_QIXIS	/* use common QIXIS code */
  #define QIXIS_BASE		0xffdf0000
  #define QIXIS_BASE_PHYS		(0xf00000000ull | QIXIS_BASE)
  #define QIXIS_LBMAP_SWITCH		0x06
  #define QIXIS_LBMAP_MASK		0x0f
  #define QIXIS_LBMAP_SHIFT		0
  #define QIXIS_LBMAP_DFLTBANK		0x00
  #define QIXIS_LBMAP_ALTBANK		0x04
  #define QIXIS_RST_CTL_RESET		0x31
  #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
  #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
  #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08

  #define	QIXIS_RST_FORCE_MEM		0x01

  
  #define CONFIG_SYS_CSPR3_EXT	(0xf)
  #define CONFIG_SYS_CSPR3	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
  				| CSPR_PORT_SIZE_8 \
  				| CSPR_MSEL_GPCM \
  				| CSPR_V)
  #define CONFIG_SYS_AMASK3	IFC_AMASK(4*1024)
  #define CONFIG_SYS_CSOR3	0x0
  /* QIXIS Timing parameters for IFC CS3 */
  #define CONFIG_SYS_CS3_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \
  					FTIM0_GPCM_TEADC(0x0e) | \
  					FTIM0_GPCM_TEAHC(0x0e))
  #define CONFIG_SYS_CS3_FTIM1		(FTIM1_GPCM_TACO(0xff) | \
  					FTIM1_GPCM_TRAD(0x3f))
  #define CONFIG_SYS_CS3_FTIM2		(FTIM2_GPCM_TCS(0x0e) | \

  					FTIM2_GPCM_TCH(0x8) | \

  					FTIM2_GPCM_TWP(0x1f))
  #define CONFIG_SYS_CS3_FTIM3		0x0
  
  #define CONFIG_NAND_FSL_IFC
  #define CONFIG_SYS_NAND_BASE		0xff800000
  #define CONFIG_SYS_NAND_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_NAND_BASE)
  
  #define CONFIG_SYS_NAND_CSPR_EXT	(0xf)
  #define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
  				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
  				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
  				| CSPR_V)
  #define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
  
  #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
  				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
  				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
  				| CSOR_NAND_RAL_3	/* RAL = 3Byes */ \
  				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
  				| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
  				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
  
  #define CONFIG_SYS_NAND_ONFI_DETECTION
  
  /* ONFI NAND Flash mode0 Timing Params */
  #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
  					FTIM0_NAND_TWP(0x18)   | \
  					FTIM0_NAND_TWCHT(0x07) | \
  					FTIM0_NAND_TWH(0x0a))
  #define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
  					FTIM1_NAND_TWBE(0x39)  | \
  					FTIM1_NAND_TRR(0x0e)   | \
  					FTIM1_NAND_TRP(0x18))
  #define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x0f) | \
  					FTIM2_NAND_TREH(0x0a) | \
  					FTIM2_NAND_TWHRE(0x1e))
  #define CONFIG_SYS_NAND_FTIM3		0x0
  
  #define CONFIG_SYS_NAND_DDR_LAW		11
  #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
  #define CONFIG_SYS_MAX_NAND_DEVICE	1

  
  #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
  
  #if defined(CONFIG_NAND)
  #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
  #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
  #define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
  #define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
  #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
  #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
  #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
  #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
  #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
  #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR0_CSPR
  #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
  #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
  #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
  #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
  #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
  #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
  #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR1_CSPR_EXT
  #define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR1_CSPR
  #define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK
  #define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
  #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
  #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
  #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
  #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
  #else
  #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
  #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
  #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
  #define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
  #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
  #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
  #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
  #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
  #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR1_CSPR_EXT
  #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR1_CSPR
  #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
  #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
  #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
  #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
  #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
  #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
  #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NAND_CSPR_EXT
  #define CONFIG_SYS_CSPR2		CONFIG_SYS_NAND_CSPR
  #define CONFIG_SYS_AMASK2		CONFIG_SYS_NAND_AMASK
  #define CONFIG_SYS_CSOR2		CONFIG_SYS_NAND_CSOR
  #define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NAND_FTIM0
  #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
  #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
  #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
  #endif
  
  #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
  
  #if defined(CONFIG_RAMBOOT_PBL)
  #define CONFIG_SYS_RAMBOOT
  #endif
  
  #define CONFIG_BOARD_EARLY_INIT_R
  #define CONFIG_MISC_INIT_R
  
  #define CONFIG_HWCONFIG
  
  /* define to use L1 as initial stack */
  #define CONFIG_L1_INIT_RAM
  #define CONFIG_SYS_INIT_RAM_LOCK
  #define CONFIG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
  #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH	0xf

  #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW	0xfe03c000

  /* The assembler doesn't like typecast */
  #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
  	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
  	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
  #define CONFIG_SYS_INIT_RAM_SIZE		0x00004000
  
  #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
  					GENERATED_GBL_DATA_SIZE)
  #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

  #define CONFIG_SYS_MONITOR_LEN		(768 * 1024)

  #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

  
  /* Serial Port - controlled on board with jumper J8
   * open - index 2
   * shorted - index 1
   */
  #define CONFIG_CONS_INDEX	1

  #define CONFIG_SYS_NS16550_SERIAL
  #define CONFIG_SYS_NS16550_REG_SIZE	1
  #define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)
  
  #define CONFIG_SYS_BAUDRATE_TABLE	\
  	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
  
  #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x11C500)
  #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x11C600)
  #define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR+0x11D500)
  #define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)

  /* Video */
  #define CONFIG_FSL_DIU_FB
  #ifdef CONFIG_FSL_DIU_FB

  #define CONFIG_FSL_DIU_CH7301

  #define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_CCSRBAR + 0x180000)

  #define CONFIG_VIDEO_LOGO
  #define CONFIG_VIDEO_BMP_LOGO
  #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
  /*
   * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
   * disable empty flash sector detection, which is I/O-intensive.
   */
  #undef CONFIG_SYS_FLASH_EMPTY_INFO
  #endif

  /* I2C */
  #define CONFIG_SYS_I2C
  #define CONFIG_SYS_I2C_FSL		/* Use FSL common I2C driver */

  #define CONFIG_SYS_FSL_I2C_SPEED	50000	/* I2C speed in Hz */

  #define CONFIG_SYS_FSL_I2C2_SPEED	50000
  #define CONFIG_SYS_FSL_I2C3_SPEED	50000
  #define CONFIG_SYS_FSL_I2C4_SPEED	50000

  #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F

  #define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F

  #define CONFIG_SYS_FSL_I2C3_SLAVE	0x7F
  #define CONFIG_SYS_FSL_I2C4_SLAVE	0x7F

  #define CONFIG_SYS_FSL_I2C_OFFSET	0x118000

  #define CONFIG_SYS_FSL_I2C2_OFFSET	0x118100
  #define CONFIG_SYS_FSL_I2C3_OFFSET	0x119000
  #define CONFIG_SYS_FSL_I2C4_OFFSET	0x119100

  
  #define I2C_MUX_PCA_ADDR		0x77
  #define I2C_MUX_PCA_ADDR_PRI		0x77 /* Primary Mux*/

  /* I2C bus multiplexer */
  #define I2C_MUX_CH_DEFAULT      0x8

  #define I2C_MUX_CH_DIU		0xC
  
  /* LDI/DVI Encoder for display */
  #define CONFIG_SYS_I2C_LDI_ADDR         0x38
  #define CONFIG_SYS_I2C_DVI_ADDR         0x75

  
  /*
   * RTC configuration
   */
  #define RTC
  #define CONFIG_RTC_DS3231               1
  #define CONFIG_SYS_I2C_RTC_ADDR         0x68
  
  /*
   * eSPI - Enhanced SPI
   */

  #define CONFIG_SF_DEFAULT_SPEED         10000000
  #define CONFIG_SF_DEFAULT_MODE          0
  
  /*
   * General PCI
   * Memory space is mapped 1-1, but I/O space must start from 0.
   */
  
  #ifdef CONFIG_PCI
  /* controller 1, direct to uli, tgtid 3, Base address 20000 */
  #ifdef CONFIG_PCIE1
  #define	CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
  #define	CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
  #define	CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
  #define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000	/* 256M */
  #define CONFIG_SYS_PCIE1_IO_VIRT	0xf8000000
  #define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
  #define CONFIG_SYS_PCIE1_IO_PHYS	0xff8000000ull
  #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
  #endif
  
  /* controller 2, Slot 2, tgtid 2, Base address 201000 */
  #ifdef CONFIG_PCIE2
  #define CONFIG_SYS_PCIE2_MEM_VIRT	0x90000000
  #define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
  #define CONFIG_SYS_PCIE2_MEM_PHYS	0xc10000000ull
  #define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000	/* 256M */
  #define CONFIG_SYS_PCIE2_IO_VIRT	0xf8010000
  #define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
  #define CONFIG_SYS_PCIE2_IO_PHYS	0xff8010000ull
  #define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
  #endif
  
  /* controller 3, Slot 1, tgtid 1, Base address 202000 */
  #ifdef CONFIG_PCIE3
  #define CONFIG_SYS_PCIE3_MEM_VIRT	0xa0000000
  #define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
  #define CONFIG_SYS_PCIE3_MEM_PHYS	0xc20000000ull
  #define CONFIG_SYS_PCIE3_MEM_SIZE	0x10000000	/* 256M */
  #define CONFIG_SYS_PCIE3_IO_VIRT	0xf8020000
  #define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
  #define CONFIG_SYS_PCIE3_IO_PHYS	0xff8020000ull
  #define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
  #endif
  
  /* controller 4, Base address 203000 */
  #ifdef CONFIG_PCIE4
  #define CONFIG_SYS_PCIE4_MEM_VIRT	0xb0000000
  #define CONFIG_SYS_PCIE4_MEM_BUS	0xe0000000
  #define CONFIG_SYS_PCIE4_MEM_PHYS	0xc30000000ull
  #define CONFIG_SYS_PCIE4_MEM_SIZE	0x10000000	/* 256M */
  #define CONFIG_SYS_PCIE4_IO_VIRT	0xf8030000
  #define CONFIG_SYS_PCIE4_IO_BUS		0x00000000
  #define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
  #define CONFIG_SYS_PCIE4_IO_SIZE	0x00010000	/* 64k */
  #endif

  #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */

  #endif	/* CONFIG_PCI */
  
  /* SATA */
  #define CONFIG_FSL_SATA_V2
  #ifdef CONFIG_FSL_SATA_V2

  #define CONFIG_SYS_SATA_MAX_DEVICE	2
  #define CONFIG_SATA1
  #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
  #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
  #define CONFIG_SATA2
  #define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
  #define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
  
  #define CONFIG_LBA48

  #endif
  
  /*
  * USB
  */
  #define CONFIG_HAS_FSL_DR_USB
  
  #ifdef CONFIG_HAS_FSL_DR_USB

  #ifdef CONFIG_USB_EHCI_HCD

  #define CONFIG_USB_EHCI_FSL
  #define CONFIG_EHCI_HCD_INIT_AFTER_RESET

  #endif
  #endif

  #ifdef CONFIG_MMC
  #define CONFIG_FSL_ESDHC

  #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK

  #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR

  #define CONFIG_FSL_ESDHC_ADAPTER_IDENT

  #endif
  
  /* Qman/Bman */
  #ifndef CONFIG_NOBQFMAN

  #define CONFIG_SYS_BMAN_NUM_PORTALS	10

  #define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
  #define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
  #define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000

  #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
  #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
  #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
  #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
  #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
  					CONFIG_SYS_BMAN_CENA_SIZE)
  #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
  #define CONFIG_SYS_BMAN_SWP_ISDR_REG	0xE08

  #define CONFIG_SYS_QMAN_NUM_PORTALS	10

  #define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
  #define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
  #define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000

  #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
  #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
  #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
  #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
  #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
  					CONFIG_SYS_QMAN_CENA_SIZE)
  #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
  #define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08

  
  #define CONFIG_SYS_DPAA_FMAN
  #define CONFIG_SYS_DPAA_PME

  #define CONFIG_QE
  #define CONFIG_U_QE

  /* Default address of microcode for the Linux Fman driver */
  #if defined(CONFIG_SPIFLASH)
  /*
   * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
   * env, so we got 0x110000.
   */
  #define CONFIG_SYS_QE_FW_IN_SPIFLASH

  #define CONFIG_SYS_FMAN_FW_ADDR	0x110000

  #elif defined(CONFIG_SDCARD)
  /*
   * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is

   * about 825KB (1650 blocks), Env is stored after the image, and the env size is
   * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.

   */
  #define CONFIG_SYS_QE_FMAN_FW_IN_MMC

  #define CONFIG_SYS_FMAN_FW_ADDR	(512 * 1680)

  #elif defined(CONFIG_NAND)
  #define CONFIG_SYS_QE_FMAN_FW_IN_NAND

  #define CONFIG_SYS_FMAN_FW_ADDR	(8 * CONFIG_SYS_NAND_BLOCK_SIZE)

  #else
  #define CONFIG_SYS_QE_FMAN_FW_IN_NOR

  #define CONFIG_SYS_FMAN_FW_ADDR		0xEFF00000

  #define CONFIG_SYS_QE_FW_ADDR		0xEFF10000

  #endif
  #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
  #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
  #endif /* CONFIG_NOBQFMAN */
  
  #ifdef CONFIG_SYS_DPAA_FMAN
  #define CONFIG_FMAN_ENET
  #define CONFIG_PHYLIB_10G
  #define CONFIG_PHY_VITESSE
  #define CONFIG_PHY_REALTEK
  #define CONFIG_PHY_TERANETICS
  #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
  #define SGMII_CARD_PORT2_PHY_ADDR 0x10
  #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
  #define SGMII_CARD_PORT4_PHY_ADDR 0x11
  #endif
  
  #ifdef CONFIG_FMAN_ENET

  #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR	0x01
  #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR	0x02

  
  #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
  #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
  #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
  #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
  
  #define CONFIG_MII		/* MII PHY management */
  #define CONFIG_ETHPRIME		"FM1@DTSEC1"

  #endif

  /* Enable VSC9953 L2 Switch driver */
  #define CONFIG_VSC9953

  #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR	0x14
  #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR	0x18

  /*

   * Dynamic MTD Partition support with mtdparts
   */

  #ifdef CONFIG_MTD_NOR_FLASH

  #define CONFIG_MTD_DEVICE
  #define CONFIG_MTD_PARTITIONS

  #define CONFIG_FLASH_CFI_MTD

  #endif
  
  /*

   * Environment
   */
  #define CONFIG_LOADS_ECHO		/* echo on for serial download */
  #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
  
  /*

   * Miscellaneous configurable options
   */

  #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */

  
  /*
   * For booting Linux, the board info and command line data
   * have to be in the first 64 MB of memory, since this is
   * the maximum mapped by the Linux kernel during initialization.
   */
  #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
  #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
  
  #ifdef CONFIG_CMD_KGDB
  #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */

  #endif
  
  /*
   * Environment Configuration
   */
  #define CONFIG_ROOTPATH		"/opt/nfsroot"
  #define CONFIG_BOOTFILE		"uImage"
  #define CONFIG_UBOOTPATH	"u-boot.bin"	/* U-Boot image on TFTP server*/
  
  /* default location for tftp and bootm */
  #define CONFIG_LOADADDR		1000000

  #define __USB_PHY_TYPE	utmi
  
  #define	CONFIG_EXTRA_ENV_SETTINGS				\

  	"hwconfig=fsl_ddr:bank_intlv=auto;"			\

  	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
  	"netdev=eth0\0"						\

  	"video-mode=fslfb:1024x768-32@60,monitor=dvi\0"		\

  	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
  	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"	\
  	"tftpflash=tftpboot $loadaddr $uboot && "		\
  	"protect off $ubootaddr +$filesize && "			\
  	"erase $ubootaddr +$filesize && "			\
  	"cp.b $loadaddr $ubootaddr $filesize && "		\
  	"protect on $ubootaddr +$filesize && "			\
  	"cmp.b $loadaddr $ubootaddr $filesize\0"		\
  	"consoledev=ttyS0\0"					\
  	"ramdiskaddr=2000000\0"					\
  	"ramdiskfile=t1040qds/ramdisk.uboot\0"			\

  	"fdtaddr=1e00000\0"					\

  	"fdtfile=t1040qds/t1040qds.dtb\0"			\

  	"bdev=sda3\0"

  
  #define CONFIG_LINUX                       \
  	"setenv bootargs root=/dev/ram rw "            \
  	"console=$consoledev,$baudrate $othbootargs;"  \
  	"setenv ramdiskaddr 0x02000000;"               \
  	"setenv fdtaddr 0x00c00000;"		       \
  	"setenv loadaddr 0x1000000;"		       \
  	"bootm $loadaddr $ramdiskaddr $fdtaddr"
  
  #define CONFIG_HDBOOT					\
  	"setenv bootargs root=/dev/$bdev rw "		\
  	"console=$consoledev,$baudrate $othbootargs;"	\
  	"tftp $loadaddr $bootfile;"			\
  	"tftp $fdtaddr $fdtfile;"			\
  	"bootm $loadaddr - $fdtaddr"
  
  #define CONFIG_NFSBOOTCOMMAND			\
  	"setenv bootargs root=/dev/nfs rw "	\
  	"nfsroot=$serverip:$rootpath "		\
  	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
  	"console=$consoledev,$baudrate $othbootargs;"	\
  	"tftp $loadaddr $bootfile;"		\
  	"tftp $fdtaddr $fdtfile;"		\
  	"bootm $loadaddr - $fdtaddr"
  
  #define CONFIG_RAMBOOTCOMMAND				\
  	"setenv bootargs root=/dev/ram rw "		\
  	"console=$consoledev,$baudrate $othbootargs;"	\
  	"tftp $ramdiskaddr $ramdiskfile;"		\
  	"tftp $loadaddr $bootfile;"			\
  	"tftp $fdtaddr $fdtfile;"			\
  	"bootm $loadaddr $ramdiskaddr $fdtaddr"
  
  #define CONFIG_BOOTCOMMAND		CONFIG_LINUX

  #include <asm/fsl_secure_boot.h>

  #endif	/* __CONFIG_H */