/*
   *
   * Congatec Conga-QEVAl board configuration file.
   *
   * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   * Based on Freescale i.MX6Q Sabre Lite board configuration file.
   * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
   * Leo Sartre, <lsartre@adeneo-embedded.com>
   *

   * SPDX-License-Identifier:	GPL-2.0+

   */
  
  #ifndef __CONFIG_CGTQMX6EVAL_H
  #define __CONFIG_CGTQMX6EVAL_H

  #include "mx6_common.h"

  #define CONFIG_MACH_TYPE	4122

  #ifdef CONFIG_SPL

  #define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
  #define CONFIG_SPL_SPI_LOAD
  #include "imx6_spl.h"
  #endif

  /* Size of malloc() pool */
  #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

  #define CONFIG_MISC_INIT_R

  
  #define CONFIG_MXC_UART
  #define CONFIG_MXC_UART_BASE	       UART2_BASE
  
  /* MMC Configs */

  #define CONFIG_SYS_FSL_ESDHC_ADDR      0

  /* SPI NOR */

  #define CONFIG_SPI_FLASH
  #define CONFIG_SPI_FLASH_STMICRO
  #define CONFIG_SPI_FLASH_SST

  #define CONFIG_SF_DEFAULT_BUS		0
  #define CONFIG_SF_DEFAULT_SPEED		20000000
  #define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)

  /* Thermal support */

  #define CONFIG_IMX_THERMAL

  /* I2C Configs */

  #define CONFIG_SYS_I2C
  #define CONFIG_SYS_I2C_MXC

  #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
  #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */

  #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
  #define CONFIG_SYS_I2C_SPEED		  100000
  
  /* PMIC */
  #define CONFIG_POWER
  #define CONFIG_POWER_I2C
  #define CONFIG_POWER_PFUZE100
  #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08

  /* USB Configs */

  #define CONFIG_EHCI_HCD_INIT_AFTER_RESET

  #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
  #define CONFIG_MXC_USB_FLAGS	0
  #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */

  #define CONFIG_USBD_HS

  /* Framebuffer */

  #define CONFIG_VIDEO_IPUV3

  #define CONFIG_VIDEO_BMP_RLE8
  #define CONFIG_SPLASH_SCREEN
  #define CONFIG_SPLASH_SCREEN_ALIGN
  #define CONFIG_BMP_16BPP
  #define CONFIG_VIDEO_LOGO
  #define CONFIG_VIDEO_BMP_LOGO

  #define CONFIG_IMX_HDMI

  /* SATA */

  #define CONFIG_SYS_SATA_MAX_DEVICE	1
  #define CONFIG_DWC_AHSATA_PORT_ID	0
  #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
  #define CONFIG_LBA48

  /* Ethernet */

  #define CONFIG_FEC_MXC
  #define CONFIG_MII
  #define IMX_FEC_BASE			ENET_BASE_ADDR
  #define CONFIG_FEC_XCV_TYPE		RGMII
  #define CONFIG_ETHPRIME			"FEC"
  #define CONFIG_FEC_MXC_PHYADDR		6

  #define CONFIG_PHY_ATHEROS

  /* Command definition */
  
  #define CONFIG_MXC_UART_BASE	UART2_BASE

  #define CONSOLE_DEV	"ttymxc1"

  #define CONFIG_MMCROOT		"/dev/mmcblk0p2"
  #define CONFIG_SYS_MMC_ENV_DEV		0

  #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

  #define CONFIG_EXTRA_ENV_SETTINGS \
  	"script=boot.scr\0" \

  	"image=zImage\0" \

  	"fdtfile=undefined\0" \

  	"fdt_addr_r=0x18000000\0" \

  	"boot_fdt=try\0" \

  	"ip_dyn=yes\0" \

  	"console=" CONSOLE_DEV "\0" \

  	"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
  	"dfu_alt_info_spl=spl raw 0x400\0" \
  	"dfu_alt_info_img=u-boot raw 0x10000\0" \
  	"dfu_alt_info=spl raw 0x400\0" \

  	"bootm_size=0x10000000\0" \
  	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \

  	"mmcpart=1\0" \

  	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  	"update_sd_firmware=" \
  		"if test ${ip_dyn} = yes; then " \
  			"setenv get_cmd dhcp; " \
  		"else " \
  			"setenv get_cmd tftp; " \
  		"fi; " \
  		"if mmc dev ${mmcdev}; then "	\
  			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
  				"setexpr fw_sz ${filesize} / 0x200; " \
  				"setexpr fw_sz ${fw_sz} + 1; "	\
  				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  			"fi; "	\
  		"fi\0" \

  	"mmcargs=setenv bootargs console=${console},${baudrate} " \
  		"root=${mmcroot}\0" \
  	"loadbootscript=" \

  		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \

  	"bootscript=echo Running bootscript from mmc ...; " \
  		"source\0" \

  	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \

  	"mmcboot=echo Booting from mmc ...; " \
  		"run mmcargs; " \
  		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  			"if run loadfdt; then " \

  				"bootz ${loadaddr} - ${fdt_addr_r}; " \
  			"else " \
  				"if test ${boot_fdt} = try; then " \
  					"bootz; " \
  				"else " \
  					"echo WARN: Cannot load the DT; " \
  				"fi; " \
  			"fi; " \
  		"else " \
  			"bootz; " \
  		"fi;\0" \

  	"findfdt="\
  		"if test $board_rev = MX6Q ; then " \
  			"setenv fdtfile imx6q-qmx6.dtb; fi; " \
  		"if test $board_rev = MX6DL ; then " \
  			"setenv fdtfile imx6dl-qmx6.dtb; fi; " \
  		"if test $fdtfile = undefined; then " \
  			"echo WARNING: Could not determine dtb to use; fi; \0" \

  	"netargs=setenv bootargs console=${console},${baudrate} " \
  		"root=/dev/nfs " \
  		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  	"netboot=echo Booting from net ...; " \
  		"run netargs; " \
  		"if test ${ip_dyn} = yes; then " \
  			"setenv get_cmd dhcp; " \
  		"else " \
  			"setenv get_cmd tftp; " \
  		"fi; " \
  		"${get_cmd} ${image}; " \
  		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  			"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
  				"bootz ${loadaddr} - ${fdt_addr_r}; " \

  			"else " \
  				"if test ${boot_fdt} = try; then " \

  					"bootz; " \

  				"else " \
  					"echo WARN: Cannot load the DT; " \
  				"fi; " \
  			"fi; " \
  		"else " \

  			"bootz; " \

  		"fi;\0" \

  	"spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\

  
  #define CONFIG_BOOTCOMMAND \

  	"run spilock;"	    \

  	"run findfdt; "	\

  	"mmc dev ${mmcdev};" \
  	"if mmc rescan; then " \
  		"if run loadbootscript; then " \
  		"run bootscript; " \
  		"else " \
  			"if run loadimage; then " \
  				"run mmcboot; " \
  			"else run netboot; " \
  			"fi; " \
  		"fi; " \
  	"else run netboot; fi"

  #define CONFIG_SYS_MEMTEST_START       0x10000000
  #define CONFIG_SYS_MEMTEST_END	       0x10010000
  #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

  /* Physical Memory Map */
  #define CONFIG_NR_DRAM_BANKS	       1
  #define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR

  
  #define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
  #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
  #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
  
  #define CONFIG_SYS_INIT_SP_OFFSET \
  	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  #define CONFIG_SYS_INIT_SP_ADDR \
  	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

  /* Environment organization */

  #if defined (CONFIG_ENV_IS_IN_MMC)

  #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
  #define CONFIG_SYS_MMC_ENV_DEV		0

  #endif
  
  #define CONFIG_ENV_SIZE			(8 * 1024)

  #if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
  #define CONFIG_ENV_OFFSET		(768 * 1024)
  #define CONFIG_ENV_SECT_SIZE		(64 * 1024)
  #define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
  #define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
  #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
  #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
  #endif

  #endif			       /* __CONFIG_CGTQMX6EVAL_H */