/*
   * Voipac PXA270 configuration file
   *
   * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
   *

   * SPDX-License-Identifier:	GPL-2.0+

   */

  #ifndef	__CONFIG_H
  #define	__CONFIG_H

  
  /*
   * High Level Board Configuration Options
   */

  #define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */

  #define	CONFIG_VPAC270		1	/* Voipac PXA270 board */

  #define	CONFIG_SYS_TEXT_BASE	0xa0000000
  
  #ifdef	CONFIG_ONENAND
  #define	CONFIG_SPL
  #define	CONFIG_SPL_ONENAND_SUPPORT
  #define	CONFIG_SPL_ONENAND_LOAD_ADDR	0x2000
  #define	CONFIG_SPL_ONENAND_LOAD_SIZE	\
  	(512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
  #define	CONFIG_SPL_TEXT_BASE	0x5c000000
  #define	CONFIG_SPL_LDSCRIPT	"board/vpac270/u-boot-spl.lds"
  #endif

  /*
   * Environment settings
   */

  #define	CONFIG_ENV_OVERWRITE
  #define	CONFIG_SYS_MALLOC_LEN		(128*1024)

  #define	CONFIG_ARCH_CPU_INIT

  #define	CONFIG_BOOTCOMMAND						\
  	"if mmc init && fatload mmc 0 0xa4000000 uImage; then "		\
  		"bootm 0xa4000000; "					\
  	"fi; "								\
  	"if usb reset && fatload usb 0 0xa4000000 uImage; then "	\
  		"bootm 0xa4000000; "					\
  	"fi; "								\

  	"if ide reset && fatload ide 0 0xa4000000 uImage; then "	\
  		"bootm 0xa4000000; "					\
  	"fi; "								\

  	"bootm 0x60000;"

  
  #define	CONFIG_EXTRA_ENV_SETTINGS					\
  	"update_onenand="						\
  		"onenand erase 0x0 0x80000 ; "				\
  		"onenand write 0xa0000000 0x0 0x80000"

  #define	CONFIG_BOOTARGS			"console=tty0 console=ttyS0,115200"
  #define	CONFIG_TIMESTAMP
  #define	CONFIG_BOOTDELAY		2	/* Autoboot delay */
  #define	CONFIG_CMDLINE_TAG
  #define	CONFIG_SETUP_MEMORY_TAGS

  #define	CONFIG_LZMA			/* LZMA compression support */

  #define	CONFIG_OF_LIBFDT

  
  /*
   * Serial Console Configuration
   */
  #define	CONFIG_PXA_SERIAL
  #define	CONFIG_FFUART			1

  #define CONFIG_CONS_INDEX		3

  #define	CONFIG_BAUDRATE			115200

  
  /*
   * Bootloader Components Configuration
   */
  #include <config_cmd_default.h>
  
  #define	CONFIG_CMD_NET
  #define	CONFIG_CMD_ENV
  #undef	CONFIG_CMD_IMLS
  #define	CONFIG_CMD_MMC
  #define	CONFIG_CMD_USB
  #undef	CONFIG_LCD
  #define	CONFIG_CMD_IDE

  #ifdef	CONFIG_ONENAND

  #undef	CONFIG_CMD_FLASH
  #define	CONFIG_CMD_ONENAND
  #else
  #define	CONFIG_CMD_FLASH
  #undef	CONFIG_CMD_ONENAND
  #endif
  
  /*
   * Networking Configuration
   *  chip on the Voipac PXA270 board
   */
  #ifdef	CONFIG_CMD_NET
  #define	CONFIG_CMD_PING
  #define	CONFIG_CMD_DHCP

  #define	CONFIG_DRIVER_DM9000		1

  #define	CONFIG_DM9000_BASE		0x08000300	/* CS2 */
  #define	DM9000_IO			(CONFIG_DM9000_BASE)
  #define	DM9000_DATA			(CONFIG_DM9000_BASE + 4)

  #define	CONFIG_NET_RETRY_COUNT		10
  
  #define	CONFIG_BOOTP_BOOTFILESIZE
  #define	CONFIG_BOOTP_BOOTPATH
  #define	CONFIG_BOOTP_GATEWAY
  #define	CONFIG_BOOTP_HOSTNAME
  #endif
  
  /*
   * MMC Card Configuration
   */
  #ifdef	CONFIG_CMD_MMC
  #define	CONFIG_MMC

  #define	CONFIG_GENERIC_MMC
  #define	CONFIG_PXA_MMC_GENERIC

  #define	CONFIG_SYS_MMC_BASE		0xF0000000
  #define	CONFIG_CMD_FAT

  #define	CONFIG_CMD_EXT2

  #define	CONFIG_DOS_PARTITION
  #endif
  
  /*
   * KGDB
   */
  #ifdef	CONFIG_CMD_KGDB

  #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */

  #endif
  
  /*
   * HUSH Shell Configuration
   */
  #define	CONFIG_SYS_HUSH_PARSER		1

  #define	CONFIG_SYS_LONGHELP

  #ifdef	CONFIG_SYS_HUSH_PARSER

  #define	CONFIG_SYS_PROMPT		"$ "

  #else

  #endif

  #define	CONFIG_SYS_CBSIZE		256
  #define	CONFIG_SYS_PBSIZE		\
  	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
  #define	CONFIG_SYS_MAXARGS		16
  #define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

  #define	CONFIG_SYS_DEVICE_NULLDEV	1

  #define	CONFIG_CMDLINE_EDITING		1
  #define	CONFIG_AUTO_COMPLETE		1

  
  /*
   * Clock Configuration
   */

  #define	CONFIG_SYS_CPUSPEED		0x190		/* 312MHz */

  
  /*
   * DRAM Map
   */

  #define	CONFIG_NR_DRAM_BANKS		2		/* 2 banks of DRAM */

  #define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
  #define	PHYS_SDRAM_1_SIZE		0x08000000	/* 128 MB */

  #ifdef	CONFIG_RAM_256M

  #define	PHYS_SDRAM_2			0x80000000	/* SDRAM Bank #2 */
  #define	PHYS_SDRAM_2_SIZE		0x08000000	/* 128 MB */

  #endif

  
  #define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */

  #ifdef	CONFIG_RAM_256M

  #define	CONFIG_SYS_DRAM_SIZE		0x10000000	/* 256 MB DRAM */

  #else
  #define	CONFIG_SYS_DRAM_SIZE		0x08000000	/* 128 MB DRAM */
  #endif

  #define	CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
  #define	CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */

  #define	CONFIG_SYS_LOAD_ADDR		PHYS_SDRAM_1

  #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1

  #define	CONFIG_SYS_INIT_SP_ADDR		0x5c010000

  
  /*
   * NOR FLASH
   */

  #define	CONFIG_SYS_MONITOR_BASE		0x0

  #define	CONFIG_SYS_MONITOR_LEN		0x80000

  #define	CONFIG_ENV_ADDR			\
  			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)

  #define	CONFIG_ENV_SIZE			0x20000
  #define	CONFIG_ENV_SECT_SIZE		0x20000

  #if	defined(CONFIG_CMD_FLASH)	/* NOR */
  #define	PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */

  #ifdef	CONFIG_RAM_256M

  #define	PHYS_FLASH_2			0x02000000	/* Flash Bank #2 */

  #endif

  
  #define	CONFIG_SYS_FLASH_CFI
  #define	CONFIG_FLASH_CFI_DRIVER		1
  
  #define	CONFIG_SYS_MAX_FLASH_SECT	(4 + 255)

  #ifdef	CONFIG_RAM_256M

  #define	CONFIG_SYS_MAX_FLASH_BANKS	2
  #define	CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1, PHYS_FLASH_2 }

  #else
  #define	CONFIG_SYS_MAX_FLASH_BANKS	1
  #define	CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
  #endif

  
  #define	CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ)
  #define	CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ)
  
  #define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
  #define	CONFIG_SYS_FLASH_PROTECTION		1

  #define	CONFIG_ENV_IS_IN_FLASH		1

  #elif	defined(CONFIG_CMD_ONENAND)	/* OneNAND */
  #define	CONFIG_SYS_NO_FLASH
  #define	CONFIG_SYS_ONENAND_BASE		0x00000000

  #define	CONFIG_ENV_IS_IN_ONENAND	1
  
  #else	/* No flash */
  #define	CONFIG_SYS_NO_FLASH
  #define	CONFIG_SYS_ENV_IS_NOWHERE
  #endif

  /*
   * IDE
   */
  #ifdef	CONFIG_CMD_IDE
  #define	CONFIG_LBA48
  #undef	CONFIG_IDE_LED
  #undef	CONFIG_IDE_RESET

  #define	__io

  #define	CONFIG_SYS_IDE_MAXBUS		1
  #define	CONFIG_SYS_IDE_MAXDEVICE	1

  #define	CONFIG_SYS_ATA_BASE_ADDR	0x0c000000
  #define	CONFIG_SYS_ATA_IDE0_OFFSET	0x0

  #define	CONFIG_SYS_ATA_DATA_OFFSET	0x120
  #define	CONFIG_SYS_ATA_REG_OFFSET	0x120
  #define	CONFIG_SYS_ATA_ALT_OFFSET	0x120

  
  #define	CONFIG_SYS_ATA_STRIDE		2
  #endif
  
  /*
   * GPIO settings
   */
  #define	CONFIG_SYS_GPSR0_VAL	0x01308800
  #define	CONFIG_SYS_GPSR1_VAL	0x00cf0000
  #define	CONFIG_SYS_GPSR2_VAL	0x922ac000
  #define	CONFIG_SYS_GPSR3_VAL	0x0161e800
  
  #define	CONFIG_SYS_GPCR0_VAL	0x00010000
  #define	CONFIG_SYS_GPCR1_VAL	0x0
  #define	CONFIG_SYS_GPCR2_VAL	0x0
  #define	CONFIG_SYS_GPCR3_VAL	0x0
  
  #define	CONFIG_SYS_GPDR0_VAL	0xcbb18800
  #define	CONFIG_SYS_GPDR1_VAL	0xfccfa981
  #define	CONFIG_SYS_GPDR2_VAL	0x922affff
  #define	CONFIG_SYS_GPDR3_VAL	0x0161e904
  
  #define	CONFIG_SYS_GAFR0_L_VAL	0x00100000
  #define	CONFIG_SYS_GAFR0_U_VAL	0xa5da8510
  #define	CONFIG_SYS_GAFR1_L_VAL	0x6992901a
  #define	CONFIG_SYS_GAFR1_U_VAL	0xaaa5a0aa
  #define	CONFIG_SYS_GAFR2_L_VAL	0xaaaaaaaa
  #define	CONFIG_SYS_GAFR2_U_VAL	0x4109a401
  #define	CONFIG_SYS_GAFR3_L_VAL	0x54010310
  #define	CONFIG_SYS_GAFR3_U_VAL	0x00025401
  
  #define	CONFIG_SYS_PSSR_VAL	0x30
  
  /*
   * Clock settings
   */
  #define	CONFIG_SYS_CKEN		0x00500240
  #define	CONFIG_SYS_CCCR		0x02000290
  
  /*
   * Memory settings
   */

  #define	CONFIG_SYS_MSC0_VAL	0x3ffc95f9

  #define	CONFIG_SYS_MSC1_VAL	0x02ccf974
  #define	CONFIG_SYS_MSC2_VAL	0x00000000

  #ifdef	CONFIG_RAM_256M

  #define	CONFIG_SYS_MDCNFG_VAL	0x8ad30ad3

  #else
  #define	CONFIG_SYS_MDCNFG_VAL	0x88000ad3
  #endif

  #define	CONFIG_SYS_MDREFR_VAL	0x201fe01e
  #define	CONFIG_SYS_MDMRS_VAL	0x00000000
  #define	CONFIG_SYS_FLYCNFG_VAL	0x00000000
  #define	CONFIG_SYS_SXCNFG_VAL	0x40044004
  #define	CONFIG_SYS_MEM_BUF_IMP	0x0f
  
  /*
   * PCMCIA and CF Interfaces
   */
  #define	CONFIG_SYS_MECR_VAL	0x00000001
  #define	CONFIG_SYS_MCMEM0_VAL	0x00014307
  #define	CONFIG_SYS_MCMEM1_VAL	0x00014307
  #define	CONFIG_SYS_MCATT0_VAL	0x0001c787
  #define	CONFIG_SYS_MCATT1_VAL	0x0001c787
  #define	CONFIG_SYS_MCIO0_VAL	0x0001430f
  #define	CONFIG_SYS_MCIO1_VAL	0x0001430f
  
  /*
   * LCD
   */
  #ifdef	CONFIG_LCD

  #define	CONFIG_VOIPAC_LCD

  #endif
  
  /*
   * USB
   */

  #ifdef	CONFIG_CMD_USB

  #define	CONFIG_USB_OHCI_NEW
  #define	CONFIG_SYS_USB_OHCI_CPU_INIT
  #define	CONFIG_SYS_USB_OHCI_BOARD_INIT
  #define	CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
  #define	CONFIG_SYS_USB_OHCI_REGS_BASE	0x4C000000
  #define	CONFIG_SYS_USB_OHCI_SLOT_NAME	"vpac270"
  #define	CONFIG_USB_STORAGE
  #endif
  
  #endif	/* __CONFIG_H */