/*

   * (C) Copyright 2013

   * Texas Instruments Incorporated.
   * Sricharan R	  <r.sricharan@ti.com>
   *

   * Configuration settings for the TI EVM5430 board.

   * See ti_omap5_common.h for omap5 common settings.

   *

   * SPDX-License-Identifier:	GPL-2.0+

   */

  #ifndef __CONFIG_OMAP5_EVM_H
  #define __CONFIG_OMAP5_EVM_H

  #include <environment/ti/dfu.h>

  #ifndef CONFIG_SPL_BUILD

  /* Define the default GPT table for eMMC */
  #define PARTS_DEFAULT \
  	"uuid_disk=${uuid_gpt_disk};" \

  	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"

  #endif

  #define DFUARGS \
  	"dfu_bufsiz=0x10000\0" \
  	DFU_ALT_INFO_MMC \
  	DFU_ALT_INFO_EMMC \
  	DFU_ALT_INFO_RAM

  #include <configs/ti_omap5_common.h>

  #define CONFIG_CONS_INDEX		3
  #define CONFIG_SYS_NS16550_COM3		UART3_BASE

  #define CONFIG_MISC_INIT_R

  /* MMC ENV related defines */

  #define CONFIG_SYS_MMC_ENV_DEV		1	/* SLOT2: eMMC(1) */

  #define CONFIG_ENV_SIZE			(128 << 10)

  #define CONFIG_ENV_OFFSET		0x260000

  #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  #define CONFIG_SYS_REDUNDAND_ENVIRONMENT

  
  /* Enhance our eMMC support / experience. */

  #define CONFIG_HSMMC2_8BIT

  #define CONFIG_SUPPORT_EMMC_BOOT

  /* Required support for the TCA642X GPIO we have on the uEVM */

  #define CONFIG_TCA642X

  #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
  #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22

  /* USB UHH support options */

  #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  
  #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
  #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
  
  /* Enabled commands */

  
  /* USB Networking options */

  #define CONSOLEDEV		"ttyO2"

  #define CONFIG_SCSI_AHCI_PLAT
  #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
  #define CONFIG_SYS_SCSI_MAX_LUN		1
  #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  						CONFIG_SYS_SCSI_MAX_LUN)

  #endif /* __CONFIG_OMAP5_EVM_H */