/*
   * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
   *
   * (C) Copyright 2007-2011
   * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
   * Tom Cubie <tangliang@allwinnertech.com>
   *
   * Configuration settings for the Allwinner sunxi series of boards.
   *
   * SPDX-License-Identifier:	GPL-2.0+
   */
  
  #ifndef _SUNXI_COMMON_CONFIG_H
  #define _SUNXI_COMMON_CONFIG_H

  #include <asm/arch/cpu.h>

  #include <linux/stringify.h>

  #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
  /*
   * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
   * expense of restricting some features, so the regular machine id values can
   * be used.
   */
  # define CONFIG_MACH_TYPE_COMPAT_REV	0
  #else
  /*
   * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
   * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
   * beyond the machine id check.
   */
  # define CONFIG_MACH_TYPE_COMPAT_REV	1
  #endif

  #ifdef CONFIG_ARM64
  #define CONFIG_BUILD_TARGET "u-boot.itb"

  #define CONFIG_SYS_BOOTM_LEN		(32 << 20)

  #endif

  /* Serial & console */

  #define CONFIG_SYS_NS16550_SERIAL
  /* ns16550 reg in the low bits of cpu reg */

  #define CONFIG_SYS_NS16550_CLK		24000000

  #ifndef CONFIG_DM_SERIAL

  # define CONFIG_SYS_NS16550_REG_SIZE	-4
  # define CONFIG_SYS_NS16550_COM1		SUNXI_UART0_BASE
  # define CONFIG_SYS_NS16550_COM2		SUNXI_UART1_BASE
  # define CONFIG_SYS_NS16550_COM3		SUNXI_UART2_BASE
  # define CONFIG_SYS_NS16550_COM4		SUNXI_UART3_BASE
  # define CONFIG_SYS_NS16550_COM5		SUNXI_R_UART_BASE
  #endif

  /* CPU */

  #define COUNTER_FREQUENCY		24000000

  /*
   * The DRAM Base differs between some models. We cannot use macros for the
   * CONFIG_FOO defines which contain the DRAM base address since they end
   * up unexpanded in include/autoconf.mk .
   *
   * So we have to have this #ifdef #else #endif block for these.
   */
  #ifdef CONFIG_MACH_SUN9I
  #define SDRAM_OFFSET(x) 0x2##x
  #define CONFIG_SYS_SDRAM_BASE		0x20000000
  #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* default load address */

  /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 
   * since it needs to fit in with the other values. By also #defining it
   * we get warnings if the Kconfig value mismatches. */
  #define CONFIG_SPL_STACK_R_ADDR		0x2fe00000

  #define CONFIG_SPL_BSS_START_ADDR	0x2ff80000
  #else
  #define SDRAM_OFFSET(x) 0x4##x

  #define CONFIG_SYS_SDRAM_BASE		0x40000000

  #define CONFIG_SYS_LOAD_ADDR		0x42000000 /* default load address */

  /* V3s do not have enough memory to place code at 0x4a000000 */

  /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 
   * since it needs to fit in with the other values. By also #defining it
   * we get warnings if the Kconfig value mismatches. */
  #define CONFIG_SPL_STACK_R_ADDR		0x4fe00000

  #define CONFIG_SPL_BSS_START_ADDR	0x4ff80000
  #endif
  
  #define CONFIG_SPL_BSS_MAX_SIZE		0x00080000 /* 512 KiB */

  #ifdef CONFIG_SUNXI_HIGH_SRAM

  /*
   * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
   * slightly bigger. Note that it is possible to map the first 32 KiB of the
   * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
   * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
   * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
   */
  #define CONFIG_SYS_INIT_RAM_ADDR	0x10000

  #define CONFIG_SYS_INIT_RAM_SIZE	0x08000	/* FIXME: 40 KiB ? */

  #else

  #define CONFIG_SYS_INIT_RAM_ADDR	0x0
  #define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* 32 KiB */

  #endif

  
  #define CONFIG_SYS_INIT_SP_OFFSET \
  	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  #define CONFIG_SYS_INIT_SP_ADDR \
  	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  
  #define CONFIG_NR_DRAM_BANKS		1
  #define PHYS_SDRAM_0			CONFIG_SYS_SDRAM_BASE
  #define PHYS_SDRAM_0_SIZE		0x80000000 /* 2 GiB */

  #ifdef CONFIG_AHCI

  #define CONFIG_SCSI_AHCI_PLAT
  #define CONFIG_SUNXI_AHCI

  #define CONFIG_SYS_64BIT_LBA

  #define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
  #define CONFIG_SYS_SCSI_MAX_LUN		1
  #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  					 CONFIG_SYS_SCSI_MAX_LUN)

  #endif

  #define CONFIG_SETUP_MEMORY_TAGS
  #define CONFIG_CMDLINE_TAG
  #define CONFIG_INITRD_TAG

  #define CONFIG_SERIAL_TAG

  #ifdef CONFIG_NAND_SUNXI

  #define CONFIG_SYS_NAND_MAX_ECCPOS 1664

  #define CONFIG_SYS_NAND_ONFI_DETECTION
  #define CONFIG_SYS_MAX_NAND_DEVICE 8

  
  #define CONFIG_MTD_DEVICE
  #define CONFIG_MTD_PARTITIONS

  #endif

  #ifdef CONFIG_SPL_SPI_SUNXI

  #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
  #endif

  /* mmc config */

  #ifdef CONFIG_MMC

  #define CONFIG_MMC_SUNXI_SLOT		0

  #endif
  
  #if defined(CONFIG_ENV_IS_IN_MMC)

  
  #ifdef CONFIG_ARM64
  /*
   * This is actually (CONFIG_ENV_OFFSET -
   * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used
   * directly in a makefile, without the preprocessor expansion.
   */
  #define CONFIG_BOARD_SIZE_LIMIT		0x7e000
  #endif

  #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
  /* If we have two devices (most likely eMMC + MMC), favour the eMMC */
  #define CONFIG_SYS_MMC_ENV_DEV		1
  #else
  /* Otherwise, use the only device we have */
  #define CONFIG_SYS_MMC_ENV_DEV		0
  #endif

  #define CONFIG_SYS_MMC_MAX_DEVICE	4

  #elif defined(CONFIG_ENV_IS_NOWHERE)
  #define CONFIG_ENV_SIZE			(128 << 10)

  #endif

  #ifndef CONFIG_MACH_SUN8I_V3S

  /* 64MB of malloc() pool */
  #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (64 << 20))

  #else
  /* 2MB of malloc() pool */
  #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (2 << 20))
  #endif

  
  /*
   * Miscellaneous configurable options
   */

  #define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
  #define CONFIG_SYS_PBSIZE	1024	/* Print Buffer Size */

  /* standalone support */

  #define CONFIG_STANDALONE_LOAD_ADDR	CONFIG_SYS_LOAD_ADDR

  /* FLASH and environment organization */

  #define CONFIG_SYS_MONITOR_LEN		(768 << 10)	/* 768 KiB */

  #ifndef CONFIG_ARM64		/* AArch64 FEL support is not ready yet */

  #define CONFIG_SPL_BOARD_LOAD_IMAGE

  #endif

  #ifdef CONFIG_SUNXI_HIGH_SRAM

  #define CONFIG_SPL_TEXT_BASE		0x10060		/* sram start+header */
  #define CONFIG_SPL_MAX_SIZE		0x7fa0		/* 32 KiB */

  #ifdef CONFIG_ARM64
  /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */
  #define LOW_LEVEL_SRAM_STACK		0x00054000
  #else

  #define LOW_LEVEL_SRAM_STACK		0x00018000

  #endif /* !CONFIG_ARM64 */

  #else

  #define CONFIG_SPL_TEXT_BASE		0x60		/* sram start+header */
  #define CONFIG_SPL_MAX_SIZE		0x5fa0		/* 24KB on sun4i/sun7i */

  #define LOW_LEVEL_SRAM_STACK		0x00008000	/* End of sram */

  #endif

  #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK

  #define CONFIG_SPL_PAD_TO		32768		/* decimal for 'dd' */

  /* I2C */

  #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
      defined CONFIG_SY8106A_POWER

  #endif

  #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
      defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \

      defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE

  #define CONFIG_SYS_I2C_MVTWSI

  #ifndef CONFIG_DM_I2C
  #define CONFIG_SYS_I2C

  #define CONFIG_SYS_I2C_SPEED		400000
  #define CONFIG_SYS_I2C_SLAVE		0x7f

  #endif

  #endif

  
  #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
  #define CONFIG_SYS_I2C_SOFT
  #define CONFIG_SYS_I2C_SOFT_SPEED	50000
  #define CONFIG_SYS_I2C_SOFT_SLAVE	0x00

  /* We use pin names in Kconfig and sunxi_name_to_gpio() */
  #define CONFIG_SOFT_I2C_GPIO_SDA	soft_i2c_gpio_sda
  #define CONFIG_SOFT_I2C_GPIO_SCL	soft_i2c_gpio_scl
  #ifndef __ASSEMBLY__
  extern int soft_i2c_gpio_sda;
  extern int soft_i2c_gpio_scl;
  #endif

  #define CONFIG_VIDEO_LCD_I2C_BUS	0 /* The lcd panel soft i2c is bus 0 */
  #define CONFIG_SYS_SPD_BUS_NUM		1 /* And the axp209 i2c bus is bus 1 */
  #else
  #define CONFIG_SYS_SPD_BUS_NUM		0 /* The axp209 i2c bus is bus 0 */
  #define CONFIG_VIDEO_LCD_I2C_BUS	-1 /* NA, but necessary to compile */

  #endif

  /* PMU */

  #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \

      defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
      defined CONFIG_SY8106A_POWER

  #endif

  #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE

  #if CONFIG_CONS_INDEX == 1
  #ifdef CONFIG_MACH_SUN9I
  #define OF_STDOUT_PATH		"/soc/serial@07000000:115200"
  #else
  #define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28000:115200"
  #endif
  #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
  #define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28400:115200"

  #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
  #define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28800:115200"

  #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
  #define OF_STDOUT_PATH		"/soc@01c00000/serial@01f02800:115200"
  #else
  #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
  #endif

  #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */

  /* GPIO */
  #define CONFIG_SUNXI_GPIO

  #ifdef CONFIG_VIDEO_SUNXI

  /*

   * The amount of RAM to keep free at the top of RAM when relocating u-boot,
   * to use as framebuffer. This must be a multiple of 4096.

   */

  #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)

  #define CONFIG_VIDEO_LOGO

  #define CONFIG_VIDEO_STD_TIMINGS

  #define CONFIG_I2C_EDID

  #define VIDEO_LINE_LEN (pGD->plnSizeX)

  
  /* allow both serial and cfb console. */

  /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */

  #endif /* CONFIG_VIDEO_SUNXI */

  /* Ethernet support */

  #ifdef CONFIG_SUN4I_EMAC

  #define CONFIG_PHY_ADDR		1

  #define CONFIG_MII			/* MII PHY management		*/
  #endif

  #ifdef CONFIG_SUN7I_GMAC

  #define CONFIG_PHY_ADDR		1
  #define CONFIG_MII			/* MII PHY management		*/

  #define CONFIG_PHY_REALTEK

  #endif

  #ifdef CONFIG_USB_EHCI_HCD

  #define CONFIG_USB_OHCI_NEW
  #define CONFIG_USB_OHCI_SUNXI
  #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1

  #endif

  #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE

  #endif

  #ifdef CONFIG_USB_KEYBOARD

  #define CONFIG_PREBOOT

  #endif

  #define CONFIG_MISC_INIT_R

  #ifndef CONFIG_SPL_BUILD

  #ifdef CONFIG_ARM64
  /*
   * Boards seem to come with at least 512MB of DRAM.
   * The kernel should go at 512K, which is the default text offset (that will
   * be adjusted at runtime if needed).
   * There is no compression for arm64 kernels (yet), so leave some space
   * for really big kernels, say 256MB for now.
   * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
   * Align the initrd to a 2MB page.
   */

  #define BOOTM_SIZE	__stringify(0xa000000)

  #define KERNEL_ADDR_R	__stringify(SDRAM_OFFSET(0080000))
  #define FDT_ADDR_R	__stringify(SDRAM_OFFSET(FA00000))
  #define SCRIPT_ADDR_R	__stringify(SDRAM_OFFSET(FC00000))
  #define PXEFILE_ADDR_R	__stringify(SDRAM_OFFSET(FD00000))
  #define RAMDISK_ADDR_R	__stringify(SDRAM_OFFSET(FE00000))
  
  #else

  /*

   * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.

   * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
   * 1M script, 1M pxe and the ramdisk at the end.
   */

  #ifndef CONFIG_MACH_SUN8I_V3S
  #define BOOTM_SIZE     __stringify(0xa000000)

  #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
  #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
  #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
  #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
  #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))

  #else
  /*
   * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
   * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
   * 1M script, 1M pxe and the ramdisk at the end.
   */
  #define BOOTM_SIZE     __stringify(0x2e00000)
  #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(1000000))
  #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(1800000))
  #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(1900000))
  #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
  #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
  #endif

  #endif

  #define MEM_LAYOUT_ENV_SETTINGS \

  	"bootm_size=" BOOTM_SIZE "\0" \

  	"kernel_addr_r=" KERNEL_ADDR_R "\0" \
  	"fdt_addr_r=" FDT_ADDR_R "\0" \
  	"scriptaddr=" SCRIPT_ADDR_R "\0" \
  	"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
  	"ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
  
  #define DFU_ALT_INFO_RAM \
  	"dfu_alt_info_ram=" \
  	"kernel ram " KERNEL_ADDR_R " 0x1000000;" \
  	"fdt ram " FDT_ADDR_R " 0x100000;" \
  	"ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"

  #ifdef CONFIG_MMC

  #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1

  #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance)		\
  	BOOTENV_DEV_MMC(MMC, mmc, 0)					\
  	BOOTENV_DEV_MMC(MMC, mmc, 1)					\
  	"bootcmd_mmc_auto="						\
  		"if test ${mmc_bootdev} -eq 1; then "			\
  			"run bootcmd_mmc1; "				\
  			"run bootcmd_mmc0; "				\
  		"elif test ${mmc_bootdev} -eq 0; then "			\
  			"run bootcmd_mmc0; "				\
  			"run bootcmd_mmc1; "				\
  		"fi\0"
  
  #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \
  	"mmc_auto "
  
  #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na)

  #else

  #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)

  #endif

  #else
  #define BOOT_TARGET_DEVICES_MMC(func)
  #endif

  #ifdef CONFIG_AHCI
  #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
  #else
  #define BOOT_TARGET_DEVICES_SCSI(func)
  #endif

  #ifdef CONFIG_USB_STORAGE

  #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
  #else
  #define BOOT_TARGET_DEVICES_USB(func)
  #endif

  /* FEL boot support, auto-execute boot.scr if a script address was provided */
  #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
  	"bootcmd_fel=" \
  		"if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
  			"echo '(FEL boot)'; " \
  			"source ${fel_scriptaddr}; " \
  		"fi\0"
  #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
  	"fel "

  #define BOOT_TARGET_DEVICES(func) \

  	func(FEL, fel, na) \

  	BOOT_TARGET_DEVICES_MMC(func) \

  	BOOT_TARGET_DEVICES_SCSI(func) \

  	BOOT_TARGET_DEVICES_USB(func) \

  	func(PXE, pxe, na) \
  	func(DHCP, dhcp, na)

  #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
  #define BOOTCMD_SUNXI_COMPAT \
  	"bootcmd_sunxi_compat=" \
  		"setenv root /dev/mmcblk0p3 rootwait; " \
  		"if ext2load mmc 0 0x44000000 uEnv.txt; then " \
  			"echo Loaded environment from uEnv.txt; " \
  			"env import -t 0x44000000 ${filesize}; " \
  		"fi; " \
  		"setenv bootargs console=${console} root=${root} ${extraargs}; " \
  		"ext2load mmc 0 0x43000000 script.bin && " \
  		"ext2load mmc 0 0x48000000 uImage && " \
  		"bootm 0x48000000\0"
  #else
  #define BOOTCMD_SUNXI_COMPAT
  #endif

  #include <config_distro_bootcmd.h>

  #ifdef CONFIG_USB_KEYBOARD
  #define CONSOLE_STDIN_SETTINGS \
  	"preboot=usb start\0" \
  	"stdin=serial,usbkbd\0"
  #else

  #define CONSOLE_STDIN_SETTINGS \
  	"stdin=serial\0"

  #endif

  
  #ifdef CONFIG_VIDEO
  #define CONSOLE_STDOUT_SETTINGS \
  	"stdout=serial,vga\0" \
  	"stderr=serial,vga\0"

  #elif CONFIG_DM_VIDEO
  #define CONFIG_SYS_WHITE_ON_BLACK
  #define CONSOLE_STDOUT_SETTINGS \
  	"stdout=serial,vidconsole\0" \
  	"stderr=serial,vidconsole\0"

  #else
  #define CONSOLE_STDOUT_SETTINGS \
  	"stdout=serial\0" \
  	"stderr=serial\0"
  #endif

  #ifdef CONFIG_MTDIDS_DEFAULT
  #define SUNXI_MTDIDS_DEFAULT \
  	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"
  #else
  #define SUNXI_MTDIDS_DEFAULT
  #endif
  
  #ifdef CONFIG_MTDPARTS_DEFAULT
  #define SUNXI_MTDPARTS_DEFAULT \
  	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
  #else
  #define SUNXI_MTDPARTS_DEFAULT
  #endif

  #define PARTS_DEFAULT \
  	"name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \
  	"name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \
  	"name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \
  	"name=system,size=-,uuid=${uuid_gpt_system};"
  
  #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b"
  
  #ifdef CONFIG_ARM64
  #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae"
  #else
  #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3"
  #endif

  #define CONSOLE_ENV_SETTINGS \
  	CONSOLE_STDIN_SETTINGS \
  	CONSOLE_STDOUT_SETTINGS

  #ifdef CONFIG_ARM64
  #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
  #else
  #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
  #endif

  #define CONFIG_EXTRA_ENV_SETTINGS \

  	CONSOLE_ENV_SETTINGS \

  	MEM_LAYOUT_ENV_SETTINGS \

  	DFU_ALT_INFO_RAM \

  	"fdtfile=" FDTFILE "\0" \

  	"console=ttyS0,115200\0" \

  	SUNXI_MTDIDS_DEFAULT \
  	SUNXI_MTDPARTS_DEFAULT \

  	"uuid_gpt_esp=" UUID_GPT_ESP "\0" \
  	"uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
  	"partitions=" PARTS_DEFAULT "\0" \

  	BOOTCMD_SUNXI_COMPAT \

  	BOOTENV
  
  #else /* ifndef CONFIG_SPL_BUILD */
  #define CONFIG_EXTRA_ENV_SETTINGS

  #endif
  
  #endif /* _SUNXI_COMMON_CONFIG_H */