#ifndef __SERIAL_H__
  #define __SERIAL_H__

  #include <post.h>

  struct serial_device {

  	/* enough bytes to match alignment of following func pointer */

  	char	name[16];

  	int	(*start)(void);
  	int	(*stop)(void);

  	void	(*setbrg)(void);
  	int	(*getc)(void);
  	int	(*tstc)(void);
  	void	(*putc)(const char c);
  	void	(*puts)(const char *s);

  #if CONFIG_POST & CONFIG_SYS_POST_UART

  	void	(*loop)(int);

  #endif

  	struct serial_device	*next;

  };

  void default_serial_puts(const char *s);

  extern struct serial_device serial_smc_device;
  extern struct serial_device serial_scc_device;

  extern struct serial_device *default_serial_console(void);

  #if	defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \

  	defined(CONFIG_MPC86xx) || \

  	defined(CONFIG_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \

  	defined(CONFIG_MICROBLAZE)

  extern struct serial_device serial0_device;
  extern struct serial_device serial1_device;

  #endif

  extern struct serial_device eserial1_device;
  extern struct serial_device eserial2_device;

  extern struct serial_device eserial3_device;
  extern struct serial_device eserial4_device;
  extern struct serial_device eserial5_device;
  extern struct serial_device eserial6_device;

  extern void serial_register(struct serial_device *);

  extern void serial_initialize(void);

  extern void serial_stdio_init(void);

  extern int serial_assign(const char *name);

  extern void serial_reinit_all(void);

  /* For usbtty */

  #ifdef CONFIG_USB_TTY

  struct stdio_dev;
  
  int usbtty_getc(struct stdio_dev *dev);
  void usbtty_putc(struct stdio_dev *dev, const char c);
  void usbtty_puts(struct stdio_dev *dev, const char *str);
  int usbtty_tstc(struct stdio_dev *dev);

  #else
  
  /* stubs */

  #define usbtty_getc(dev) 0
  #define usbtty_putc(dev, a)
  #define usbtty_puts(dev, a)
  #define usbtty_tstc(dev) 0

  
  #endif /* CONFIG_USB_TTY */

  struct udevice;

  enum serial_par {
  	SERIAL_PAR_NONE,
  	SERIAL_PAR_ODD,
  	SERIAL_PAR_EVEN
  };

  #define SERIAL_PAR_SHIFT	0
  #define SERIAL_PAR_MASK		(0x03 << SERIAL_PAR_SHIFT)

  #define SERIAL_SET_PARITY(parity) \
  	((parity << SERIAL_PAR_SHIFT) & SERIAL_PAR_MASK)

  #define SERIAL_GET_PARITY(config) \
  	((config & SERIAL_PAR_MASK) >> SERIAL_PAR_SHIFT)
  
  enum serial_bits {
  	SERIAL_5_BITS,
  	SERIAL_6_BITS,
  	SERIAL_7_BITS,
  	SERIAL_8_BITS
  };
  
  #define SERIAL_BITS_SHIFT	2
  #define SERIAL_BITS_MASK	(0x3 << SERIAL_BITS_SHIFT)

  #define SERIAL_SET_BITS(bits) \
  	((bits << SERIAL_BITS_SHIFT) & SERIAL_BITS_MASK)

  #define SERIAL_GET_BITS(config) \
  	((config & SERIAL_BITS_MASK) >> SERIAL_BITS_SHIFT)
  
  enum serial_stop {
  	SERIAL_HALF_STOP,	/* 0.5 stop bit */
  	SERIAL_ONE_STOP,	/*   1 stop bit */
  	SERIAL_ONE_HALF_STOP,	/* 1.5 stop bit */
  	SERIAL_TWO_STOP		/*   2 stop bit */
  };
  
  #define SERIAL_STOP_SHIFT	4
  #define SERIAL_STOP_MASK	(0x3 << SERIAL_STOP_SHIFT)

  #define SERIAL_SET_STOP(stop) \
  	((stop << SERIAL_STOP_SHIFT) & SERIAL_STOP_MASK)

  #define SERIAL_GET_STOP(config) \
  	((config & SERIAL_STOP_MASK) >> SERIAL_STOP_SHIFT)

  #define SERIAL_CONFIG(par, bits, stop) \
  		     (par << SERIAL_PAR_SHIFT | \
  		      bits << SERIAL_BITS_SHIFT | \
  		      stop << SERIAL_STOP_SHIFT)

  #define SERIAL_DEFAULT_CONFIG \
  			(SERIAL_PAR_NONE << SERIAL_PAR_SHIFT | \
  			 SERIAL_8_BITS << SERIAL_BITS_SHIFT | \
  			 SERIAL_ONE_STOP << SERIAL_STOP_SHIFT)

  enum serial_chip_type {
  	SERIAL_CHIP_UNKNOWN = -1,
  	SERIAL_CHIP_16550_COMPATIBLE,
  };
  
  enum adr_space_type {
  	SERIAL_ADDRESS_SPACE_MEMORY = 0,
  	SERIAL_ADDRESS_SPACE_IO,
  };
  
  /**
   * struct serial_device_info - structure to hold serial device info
   *
   * @type:	type of the UART chip
   * @addr_space:	address space to access the registers
   * @addr:	physical address of the registers
   * @reg_width:	size (in bytes) of the IO accesses to the registers
   * @reg_offset:	offset to apply to the @addr from the start of the registers
   * @reg_shift:	quantity to shift the register offsets by
   * @baudrate:	baud rate
   */
  struct serial_device_info {
  	enum serial_chip_type type;
  	enum adr_space_type addr_space;
  	ulong addr;
  	u8 reg_width;
  	u8 reg_offset;
  	u8 reg_shift;
  	unsigned int baudrate;
  };
  
  #define SERIAL_DEFAULT_ADDRESS	0xBADACCE5

  /**
   * struct struct dm_serial_ops - Driver model serial operations
   *
   * The uclass interface is implemented by all serial devices which use
   * driver model.
   */
  struct dm_serial_ops {
  	/**
  	 * setbrg() - Set up the baud rate generator
  	 *
  	 * Adjust baud rate divisors to set up a new baud rate for this
  	 * device. Not all devices will support all rates. If the rate
  	 * cannot be supported, the driver is free to select the nearest
  	 * available rate. or return -EINVAL if this is not possible.
  	 *
  	 * @dev: Device pointer
  	 * @baudrate: New baud rate to use
  	 * @return 0 if OK, -ve on error
  	 */
  	int (*setbrg)(struct udevice *dev, int baudrate);
  	/**
  	 * getc() - Read a character and return it
  	 *
  	 * If no character is available, this should return -EAGAIN without
  	 * waiting.
  	 *
  	 * @dev: Device pointer
  	 * @return character (0..255), -ve on error
  	 */
  	int (*getc)(struct udevice *dev);
  	/**

  	 * puts() - puts a string
  	 *
  	 * @dev: Device pointer
  	 * @str: string to write
  	 * @return 0 if OK, -ve on error
  	 */
  	int (*puts)(struct udevice *dev, const char *str);
  	/**

  	 * putc() - Write a character
  	 *
  	 * @dev: Device pointer
  	 * @ch: character to write
  	 * @return 0 if OK, -ve on error
  	 */
  	int (*putc)(struct udevice *dev, const char ch);
  	/**
  	 * pending() - Check if input/output characters are waiting
  	 *
  	 * This can be used to return an indication of the number of waiting
  	 * characters if the driver knows this (e.g. by looking at the FIFO
  	 * level). It is acceptable to return 1 if an indeterminant number
  	 * of characters is waiting.
  	 *
  	 * This method is optional.
  	 *
  	 * @dev: Device pointer
  	 * @input: true to check input characters, false for output
  	 * @return number of waiting characters, 0 for none, -ve on error
  	 */
  	int (*pending)(struct udevice *dev, bool input);
  	/**
  	 * clear() - Clear the serial FIFOs/holding registers
  	 *
  	 * This method is optional.
  	 *
  	 * This quickly clears any input/output characters from the UART.
  	 * If this is not possible, but characters still exist, then it
  	 * is acceptable to return -EAGAIN (try again) or -EINVAL (not
  	 * supported).
  	 *
  	 * @dev: Device pointer
  	 * @return 0 if OK, -ve on error
  	 */
  	int (*clear)(struct udevice *dev);
  #if CONFIG_POST & CONFIG_SYS_POST_UART
  	/**
  	 * loop() - Control serial device loopback mode
  	 *
  	 * @dev: Device pointer
  	 * @on: 1 to turn loopback on, 0 to turn if off
  	 */
  	int (*loop)(struct udevice *dev, int on);
  #endif

  
  	/**

  	 * getconfig() - Get the uart configuration
  	 * (parity, 5/6/7/8 bits word length, stop bits)
  	 *
  	 * Get a current config for this device.
  	 *
  	 * @dev: Device pointer

  	 * @serial_config: Returns config information (see SERIAL_... above)

  	 * @return 0 if OK, -ve on error
  	 */
  	int (*getconfig)(struct udevice *dev, uint *serial_config);
  	/**

  	 * setconfig() - Set up the uart configuration
  	 * (parity, 5/6/7/8 bits word length, stop bits)
  	 *
  	 * Set up a new config for this device.
  	 *
  	 * @dev: Device pointer

  	 * @serial_config: number of bits, parity and number of stopbits to use

  	 * @return 0 if OK, -ve on error
  	 */
  	int (*setconfig)(struct udevice *dev, uint serial_config);

  	/**
  	 * getinfo() - Get serial device information
  	 *
  	 * @dev: Device pointer
  	 * @info: struct serial_device_info to fill

  	 * @return 0 if OK, -ve on error

  	 */
  	int (*getinfo)(struct udevice *dev, struct serial_device_info *info);

  };
  
  /**
   * struct serial_dev_priv - information about a device used by the uclass
   *

   * @sdev:	stdio device attached to this uart
   *
   * @buf:	Pointer to the RX buffer
   * @rd_ptr:	Read pointer in the RX buffer
   * @wr_ptr:	Write pointer in the RX buffer

   */
  struct serial_dev_priv {
  	struct stdio_dev *sdev;

  
  	char *buf;
  	int rd_ptr;
  	int wr_ptr;

  };
  
  /* Access the serial operations for a device */
  #define serial_get_ops(dev)	((struct dm_serial_ops *)(dev)->driver->ops)

  /**
   * serial_getconfig() - Get the uart configuration
   * (parity, 5/6/7/8 bits word length, stop bits)
   *
   * Get a current config for this device.
   *
   * @dev: Device pointer
   * @serial_config: Returns config information (see SERIAL_... above)
   * @return 0 if OK, -ve on error
   */

  int serial_getconfig(struct udevice *dev, uint *config);

  
  /**
   * serial_setconfig() - Set up the uart configuration
   * (parity, 5/6/7/8 bits word length, stop bits)
   *
   * Set up a new config for this device.
   *
   * @dev: Device pointer
   * @serial_config: number of bits, parity and number of stopbits to use
   * @return 0 if OK, -ve on error
   */

  int serial_setconfig(struct udevice *dev, uint config);

  
  /**
   * serial_getinfo() - Get serial device information
   *
   * @dev: Device pointer
   * @info: struct serial_device_info to fill
   * @return 0 if OK, -ve on error
   */

  int serial_getinfo(struct udevice *dev, struct serial_device_info *info);

  void atmel_serial_initialize(void);

  void mcf_serial_initialize(void);

  void mpc85xx_serial_initialize(void);

  void mxc_serial_initialize(void);

  void ns16550_serial_initialize(void);

  void pl01x_serial_initialize(void);
  void pxa_serial_initialize(void);

  void sh_serial_initialize(void);

  /**
   * serial_printf() - Write a formatted string to the serial console
   *
   * The total size of the output must be less than CONFIG_SYS_PBSIZE.
   *
   * @fmt: Printf format string, followed by format arguments
   * @return number of characters written
   */
  int serial_printf(const char *fmt, ...)
  		__attribute__ ((format (__printf__, 1, 2)));

  int serial_init(void);
  void serial_setbrg(void);
  void serial_putc(const char ch);
  void serial_putc_raw(const char ch);
  void serial_puts(const char *str);
  int serial_getc(void);
  int serial_tstc(void);

  #endif