/*
   * (C) Copyright 2011 Freescale Semiconductor, Inc
   * Andy Fleming
   *

   * SPDX-License-Identifier:	GPL-2.0+

   */
  
  /*
   * MDIO Commands
   */
  
  #include <common.h>
  #include <command.h>
  #include <miiphy.h>
  #include <phy.h>
  
  
  static char last_op[2];
  static uint last_data;
  static uint last_addr_lo;
  static uint last_addr_hi;
  static uint last_devad_lo;
  static uint last_devad_hi;
  static uint last_reg_lo;
  static uint last_reg_hi;
  
  static int extract_range(char *input, int *plo, int *phi)
  {
  	char *end;
  	*plo = simple_strtol(input, &end, 0);
  	if (end == input)
  		return -1;
  
  	if ((*end == '-') && *(++end))
  		*phi = simple_strtol(end, NULL, 0);
  	else if (*end == '\0')
  		*phi = *plo;
  	else
  		return -1;
  
  	return 0;
  }

  static int mdio_write_ranges(struct phy_device *phydev, struct mii_dev *bus,
  			     int addrlo,

  			     int addrhi, int devadlo, int devadhi,

  			     int reglo, int reghi, unsigned short data,
  			     int extended)

  {
  	int addr, devad, reg;
  	int err = 0;
  
  	for (addr = addrlo; addr <= addrhi; addr++) {
  		for (devad = devadlo; devad <= devadhi; devad++) {
  			for (reg = reglo; reg <= reghi; reg++) {

  				if (!extended)
  					err = bus->write(bus, addr, devad,
  							 reg, data);
  				else
  					err = phydev->drv->writeext(phydev,
  							addr, devad, reg, data);

  
  				if (err)
  					goto err_out;
  			}
  		}
  	}
  
  err_out:
  	return err;
  }

  static int mdio_read_ranges(struct phy_device *phydev, struct mii_dev *bus,
  			    int addrlo,

  			    int addrhi, int devadlo, int devadhi,

  			    int reglo, int reghi, int extended)

  {
  	int addr, devad, reg;
  
  	printf("Reading from bus %s
  ", bus->name);
  	for (addr = addrlo; addr <= addrhi; addr++) {
  		printf("PHY at address %d:
  ", addr);
  
  		for (devad = devadlo; devad <= devadhi; devad++) {
  			for (reg = reglo; reg <= reghi; reg++) {

  				int val;

  				if (!extended)
  					val = bus->read(bus, addr, devad, reg);
  				else
  					val = phydev->drv->readext(phydev, addr,
  						devad, reg);

  				if (val < 0) {
  					printf("Error
  ");
  
  					return val;
  				}
  
  				if (devad >= 0)
  					printf("%d.", devad);
  
  				printf("%d - 0x%x
  ", reg, val & 0xffff);
  			}
  		}
  	}
  
  	return 0;
  }
  
  /* The register will be in the form [a[-b].]x[-y] */

  static int extract_reg_range(char *input, int *devadlo, int *devadhi,
  			     int *reglo, int *reghi)

  {
  	char *regstr;
  
  	/* use strrchr to find the last string after a '.' */
  	regstr = strrchr(input, '.');
  
  	/* If it exists, extract the devad(s) */
  	if (regstr) {
  		char devadstr[32];
  
  		strncpy(devadstr, input, regstr - input);
  		devadstr[regstr - input] = '\0';
  
  		if (extract_range(devadstr, devadlo, devadhi))
  			return -1;
  
  		regstr++;
  	} else {
  		/* Otherwise, we have no devad, and we just got regs */
  		*devadlo = *devadhi = MDIO_DEVAD_NONE;
  
  		regstr = input;
  	}
  
  	return extract_range(regstr, reglo, reghi);
  }

  static int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus,

  			     struct phy_device **phydev,

  			     int *addrlo, int *addrhi)

  {

  	struct phy_device *dev = *phydev;

  
  	if ((argc < 1) || (argc > 2))
  		return -1;
  
  	/* If there are two arguments, it's busname addr */
  	if (argc == 2) {
  		*bus = miiphy_get_dev_by_name(argv[0]);
  
  		if (!*bus)
  			return -1;
  
  		return extract_range(argv[1], addrlo, addrhi);
  	}
  
  	/* It must be one argument, here */
  
  	/*
  	 * This argument can be one of two things:
  	 * 1) Ethernet device name
  	 * 2) Just an address (use the previously-used bus)
  	 *
  	 * We check all buses for a PHY which is connected to an ethernet
  	 * device by the given name.  If none are found, we call
  	 * extract_range() on the string, and see if it's an address range.
  	 */

  	dev = mdio_phydev_for_ethname(argv[0]);

  	if (dev) {
  		*addrlo = *addrhi = dev->addr;
  		*bus = dev->bus;

  
  		return 0;
  	}
  
  	/* It's an address or nothing useful */
  	return extract_range(argv[0], addrlo, addrhi);
  }
  
  /* ---------------------------------------------------------------- */
  static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
  {
  	char op[2];
  	int addrlo, addrhi, reglo, reghi, devadlo, devadhi;
  	unsigned short	data;
  	int pos = argc - 1;
  	struct mii_dev *bus;

  	struct phy_device *phydev = NULL;
  	int extended = 0;

  
  	if (argc < 2)

  		return CMD_RET_USAGE;

  
  	/*
  	 * We use the last specified parameters, unless new ones are
  	 * entered.
  	 */
  	op[0] = argv[1][0];
  	addrlo = last_addr_lo;
  	addrhi = last_addr_hi;
  	devadlo = last_devad_lo;
  	devadhi = last_devad_hi;
  	reglo  = last_reg_lo;
  	reghi  = last_reg_hi;
  	data   = last_data;
  
  	bus = mdio_get_current_dev();
  
  	if (flag & CMD_FLAG_REPEAT)
  		op[0] = last_op[0];

  	if (strlen(argv[1]) > 1) {
  		op[1] = argv[1][1];
  		if (op[1] == 'x') {
  			phydev = mdio_phydev_for_ethname(argv[2]);
  
  			if (phydev) {
  				addrlo = phydev->addr;
  				addrhi = addrlo;
  				bus = phydev->bus;
  				extended = 1;
  			} else {
  				return -1;
  			}
  
  			if (!phydev->drv ||
  			    (!phydev->drv->writeext && (op[0] == 'w')) ||
  			    (!phydev->drv->readext && (op[0] == 'r'))) {
  				puts("PHY does not have extended functions
  ");
  				return -1;
  			}
  		}
  	}

  	switch (op[0]) {
  	case 'w':
  		if (pos > 1)
  			data = simple_strtoul(argv[pos--], NULL, 16);
  	case 'r':
  		if (pos > 1)
  			if (extract_reg_range(argv[pos--], &devadlo, &devadhi,
  					&reglo, &reghi))
  				return -1;
  
  	default:
  		if (pos > 1)
  			if (extract_phy_range(&(argv[2]), pos - 1, &bus,

  					&phydev, &addrlo, &addrhi))

  				return -1;
  
  		break;
  	}
  
  	if (op[0] == 'l') {
  		mdio_list_devices();
  
  		return 0;
  	}
  
  	/* Save the chosen bus */
  	miiphy_set_current_dev(bus->name);
  
  	switch (op[0]) {
  	case 'w':

  		mdio_write_ranges(phydev, bus, addrlo, addrhi, devadlo, devadhi,
  				  reglo, reghi, data, extended);

  		break;
  
  	case 'r':

  		mdio_read_ranges(phydev, bus, addrlo, addrhi, devadlo, devadhi,
  				 reglo, reghi, extended);

  		break;
  	}
  
  	/*
  	 * Save the parameters for repeats.
  	 */
  	last_op[0] = op[0];
  	last_addr_lo = addrlo;
  	last_addr_hi = addrhi;
  	last_devad_lo = devadlo;
  	last_devad_hi = devadhi;
  	last_reg_lo  = reglo;
  	last_reg_hi  = reghi;
  	last_data    = data;
  
  	return 0;
  }
  
  /***************************************************/
  
  U_BOOT_CMD(
  	mdio,	6,	1,	do_mdio,
  	"MDIO utility commands",
  	"list			- List MDIO buses
  "
  	"mdio read <phydev> [<devad>.]<reg> - "
  		"read PHY's register at <devad>.<reg>
  "
  	"mdio write <phydev> [<devad>.]<reg> <data> - "
  		"write PHY's register at <devad>.<reg>
  "

  	"mdio rx <phydev> [<devad>.]<reg> - "
  		"read PHY's extended register at <devad>.<reg>
  "
  	"mdio wx <phydev> [<devad>.]<reg> <data> - "
  		"write PHY's extended register at <devad>.<reg>
  "

  	"<phydev> may be:
  "
  	"   <busname>  <addr>
  "
  	"   <addr>
  "
  	"   <eth name>
  "
  	"<addr> <devad>, and <reg> may be ranges, e.g. 1-5.4-0x1f.
  "
  );