/*
   * (C) Copyright 2011-2012 Pali Rohár <pali.rohar@gmail.com>
   *

   * SPDX-License-Identifier:	GPL-2.0+

   */
  
  ANSI terminal bootmenu command
  
  The "bootmenu" command uses U-Boot menu interfaces and provides
  a simple mechanism for creating menus with different boot items.
  The cursor keys "Up" and "Down" are used for navigation through
  the items. Current active menu item is highlighted and can be
  selected using the "Enter" key. The selection of the highlighted
  menu entry invokes an U-Boot command (or a list of commands)
  associated with this menu entry.
  
  The "bootmenu" command interprets ANSI escape sequencies, so
  an ANSI terminal is required for proper menu rendering and item
  selection.
  
  The assembling of the menu is done via a set of environment variables
  "bootmenu_<num>" and "bootmenu_delay", i.e.:
  
    bootmenu_delay=<delay>
    bootmenu_<num>="<title>=<commands>"
  
    <delay> is the autoboot delay in seconds, after which the first
    menu entry will be selected automatically
  
    <num> is the boot menu entry number, starting from zero
  
    <title> is the text of the menu entry shown on the console
    or on the boot screen
  
    <commands> are commands which will be executed when a menu
    entry is selected
  
    (title and commands are separated by first appearance of '='
     character in the environment variable)
  
  First (optional) argument of the "bootmenu" command is a delay specifier
  and it overrides the delay value defined by "bootmenu_delay" environment
  variable. If the environment variable "bootmenu_delay" is not set or if
  the argument of the "bootmenu" command is not specified, the default delay
  will be CONFIG_BOOTDELAY. If delay is 0, no menu entries will be shown on
  the console (or on the screen) and the command of the first menu entry will
  be called immediately. If delay is less then 0, bootmenu will be shown and
  autoboot will be disabled.
  
  Bootmenu always adds menu entry "U-Boot console" at the end of all menu
  entries specified by environment variables. When selecting this entry
  the bootmenu terminates and the usual U-Boot command prompt is presented
  to the user.
  
  Example environment:
  
    setenv bootmenu_0 Boot 1. kernel=bootm 0x82000000  # Set first menu entry
    setenv bootmenu_1 Boot 2. kernel=bootm 0x83000000  # Set second menu entry
    setenv bootmenu_2 Reset board=reset                # Set third menu entry
    setenv bootmenu_3 U-Boot boot order=boot           # Set fourth menu entry
    bootmenu 20        # Run bootmenu with autoboot delay 20s
  
  
  The above example will be rendered as below
  (without decorating rectangle):
  
  ┌──────────────────────────────────────────┐
  │                                          │
  │  *** U-Boot Boot Menu ***                │
  │                                          │
  │     Boot 1. kernel                       │
  │     Boot 2. kernel                       │
  │     Reset board                          │
  │     U-Boot boot order                    │
  │     U-Boot console                       │
  │                                          │
  │  Hit any key to stop autoboot: 20        │
  │  Press UP/DOWN to move, ENTER to select  │
  │                                          │
  └──────────────────────────────────────────┘
  
  Selected menu entry will be highlighted - it will have inverted
  background and text colors.
  
  To enable the "bootmenu" command add following definitions to the
  board config file:
  
    #define CONFIG_CMD_BOOTMENU
    #define CONFIG_MENU
  
  To run the bootmenu at startup add these additional definitions:
  
    #define CONFIG_AUTOBOOT_KEYED
    #define CONFIG_BOOTDELAY 30
    #define CONFIG_MENU_SHOW
  
  When you intend to use the bootmenu on color frame buffer console,
  make sure to additionally define CONFIG_CFB_CONSOLE_ANSI in the
  board config file.