multi_spl.its
2.01 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
/dts-v1/;
/*
* (Bogus) example FIT image description file demonstrating the usage
* of multiple images loaded by the SPL.
* Several binaries will be loaded at their respective load addresses.
*
* For booting U-Boot, "firmware" is searched first. If not found, "loadables"
* is used to identify images to be loaded into memory. If falcon boot is
* enabled, "kernel" is searched first. If not found, it falls back to the
* same flow as booting U-Boot. Changing image type will result skipping
* specific image.
*
* Finally the one image specifying an entry point will be entered by the SPL.
*/
/ {
description = "multiple firmware blobs and U-Boot, loaded by SPL";
#address-cells = <0x1>;
images {
uboot {
description = "U-Boot (64-bit)";
type = "standalone";
arch = "arm64";
compression = "none";
load = <0x4a000000>;
};
atf {
description = "ARM Trusted Firmware";
type = "firmware";
arch = "arm64";
compression = "none";
load = <0x18000>;
entry = <0x18000>;
};
mgmt-firmware {
description = "arisc management processor firmware";
type = "firmware";
arch = "or1k";
compression = "none";
load = <0x40000>;
};
fdt-1 {
description = "Pine64+ DT";
type = "flat_dt";
compression = "none";
load = <0x4fa00000>;
arch = "arm64";
};
fdt-2 {
description = "Pine64 DT";
type = "flat_dt";
compression = "none";
load = <0x4fa00000>;
arch = "arm64";
};
kernel {
description = "4.7-rc5 kernel";
type = "kernel";
compression = "none";
load = <0x40080000>;
arch = "arm64";
};
initrd {
description = "Debian installer initrd";
type = "ramdisk";
compression = "none";
load = <0x4fe00000>;
arch = "arm64";
};
};
configurations {
default = "config-1";
config-1 {
description = "sun50i-a64-pine64-plus";
loadables = "uboot", "atf", "kernel", "initrd";
fdt = "fdt-1";
};
config-2 {
description = "sun50i-a64-pine64";
loadables = "uboot", "atf", "mgmt-firmware";
fdt = "fdt-2";
};
};
};